Reviews
Fits: BMW K1600B, BMW K1600B, BMW K1600GT, BMW K1600GT, BMW K1600GTL, BMW K1600GTL, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW C600 Sport, BMW C650GT, BMW F750GS, BMW F800GS Adventure, BMW F800R, BMW F800R, BMW F800R, BMW F850GS, BMW F850GS Adventure, BMW K1200GT, BMW K1600GT
high
KTC's Hexagon socket was half price, so I bought that.
Inch size, so it's not available in stores.
View detail
Not for groms.
Purchased for installation of High Camshaft on Grom, but it was too short to fix. View detail
Another long Pin would be perfect.
Normally, I would expect to see a Pin that pushes out the Chain Pin and a longer Pin that pulls out the Chain Pin.
This one comes with only one type of Pin.
Therefore, it is necessary to push out two Pins, remove the Plate, pull it out and push the ThailandPin to the end.
That is a bit of a hassle, but for the price, this is what you get.
However, the fact that the tool is Compact is a Large change Good.
View detail
Fits: Others , HONDA GROM, HONDA MSX125, HONDA MONKEY125, HONDA SUPER CUB110, HONDA CROSSCUB110
Not used for jc92Clutch work
Center nut of jc92 Clutch turns in a box of 19 View detail
I feel like I've been cheated.
To be more precise, this tool can only be used to remove the Pulley side and to install the Clutch Side.
We don't use Rose's because it is Air, but we wanted to use it for Torque management when embedding...
I managed to fool them into thinking it was better than nothing.
View detail
Other people's impressions were correct. It is hard to use.
I was curious about this product, but apparently it was not the feel I was looking for. I found that the Brush that came with the Tane Cleaner was easier to use. I think it depends on how much you want to clean. I think that people who use TEHN Maintenance are the ones who want to make it polished, so I think that a bristle brush with moderately long and soft bristles would be better. The included Brush was easy to use. View detail
Sadly these did not work for me
About quality and texture - The whole tool is made of quite thin materials and feels undersized. For example, the handle has square edges and even with the covering it hurts to hold this tight in your hand and turn it. I found that I needed to hold it tight before turning as the lock screw is very thin (M3 size?) and if felt that if I tightened it too tight i would just cross thread it or round it off, although the folded steel bracket that holds this screw bends when you tighten as well so maybe its poor design (only held on one side) would stop that? About the feeling of use - It hurts to use this tool on an old caliper that needs a lot of pressure. I expect this would be ok on something that was in good condition, but on an old rusty caliper (with clean piston faces) this tool did not work. The (looks hardened as you can see in the photo) grips in the 'jaws' dug deep into the old piston inside edges and ripped the steel. Not something you would wish for if you wanted to keep those pistons. About Design - I think the deisgn is good but this set is cheaply made and I expect not the best example of the design. It is certainly not strong enough for being used on an old caliper where is piston is tight as that needs force to move it free, but I think that is probably the only reason DIY people like me would buy this tool. So, I have to say the design is 'bad' in this case. Cost performance and comparison with other products - It is cheap, but for my use it was money wasted. I didnt break it so I can at least use it on other (better) calipers, but it didnt do the job I wanted even when I heated the caliper. So I spent money on a tool and am no further forwards. There are other tools that look similar and I would look at those instead of this one. About shipping and packaging - shipping was fast and it was well packed. Any concerns, cautions, or advice when purchasing - I would not purchase this tool again and I suggest any potential buyer looks for another version that is built much more strongly if they are trying to work on old calipers. View detail
Pin is short and unusable.
The pin is short and the holder is at an angle, making it difficult to apply force and work.
When incorporating Mr. Takekawa's parts, the Manufacturer listed them as tools, but…
View detail
If the payment is by Silver bank transfer, you will be contacted separately, I don't know how to contact you.
I don't know how to do Cancellation, give me your contact info. View detail
I would like to cancel this product.
How do I make a cancellation? View detail
I want to do Cancellation!
I'd like to cancel my reservationHow do I cancel my reservation? View detail
Cancellation
I'm pissed off, I can't cancel anyway, I want my Gold back. View detail
Cancellation.
This product can only be used for Honda motorcycles. View detail
I broke it the second time.
It's easy to use with a complete set of Hose and Attachment to connect.
However, the second time I used it, the Engine started with the Valve open and broke. Of course, it is written in the instruction manual properly, but I did not raise the rotation, and I only turned the Cell long because the startability was bad during the carburetor adjustment. It is the cause of carelessness because it is not used frequently, but if it breaks so easily, I want you to put a Caution label on the Plate part.
I asked DAYTONA if it was possible to repair it by email, and they suggested 4,500 yen for a new RepairGauge ×4 pieces = 18,000 yen. (This is the reason why I got 1 star)
Too bad because I thought it was a trustworthy Brand. I hope After Service will improve in the future.
I've already broken mine, but if you're buying one in the future, be careful.
View detail
I will not buy anymore
After replacing the Spring twice, the Screw mountain was crushed. View detail
Difficult to use
I've never used this kind of brush before, but it's hard to move and I don't feel like it's getting cleaner. I ended up using Nylon brush. View detail
I think the quality and the caring of Manufacturer is too much. The text is just a complaint.
After purchasing the product and using it twice, I noticed that one of the LEDs was not lighting up.
By the way, I have not given any shock because it was new.
I immediately contacted WehBig and was told that it needed to be inspected and sent back.
I'm having trouble tuning in without it, but I've decided to ship it as if I had no choice.
11/19, Returned.
I contacted them to ask them to change to a newer one with a newer manufacturing date because the older ones with a newer manufacturing date break down sooner with the same breakdowns, especially this time on the first day of use and breakdowns with care, I had nothing but disbelief, although they didn't listen to me at all.
11/25, I think it arrived on 11/20, but they called to say it had arrived and they would have the Manufacturer inspect it.
On 12/11, about three weeks passed without any contact, and I contacted them to confirm.
A few days later, I received a reply saying that they would check with the Manufacturer.
On 12/16, my supplier informed me that they are checking with the Manufacturer and that it is likely to be a Limit return by the end of the year.
I thought Webig was the wholesaler, but I guess there is an intermediary, which is why it was so expensive.
He said he was going to limit by the end of the year, but I didn't hear anything from him.
Shipping notice on 1/7, arrival on 1/8.
In the end, it was a repair response.
It only takes me a few minutes to change one small LED.
If it takes 50 days, I won't send it in for repair, and I'd rather do it myself than send it in for repair, like this.
If you're so busy that you have to put up with customers, inconvenience them, and make them wait 50 days, then increase your staffing.
If you have to turn down a customer's request for repair, please think of us.
I feel cheated by Brand Kowa Seiki, I bought such an expensive product for the same amount of money, if I receive a fragile product, I will be dissatisfied.
I'm not sure what to make of it, but the box is a little beat up, the Number Label is peeling off, and the replaced failed LED is stuck on the box, but I have no idea what that means.
I wonder if the people who responded would think nothing of it if the same thing happened to them, or if they are sold by people who would think nothing of being sarcastic.
I can't stop being frustrated as to why I have to pay the same Gold amount and I'm the only one who has to go through this.
If you have a similar problem, you should ask the manufacturer for the part number and replace it yourself.
As the story goes, it's very easy to use.
The function that can be displayed side-by-side, the function that can be displayed in detail, the mechanism that does not need orifice, the resetting of the error that is unique to Digital, the accuracy that does not produce an error even if the outer surface is Rubber or the negative pressure is raised from the bottom to the top. 。
It's a shame that it doesn't have a battery system and no back light, GameBoy.
The product Ideas is great, but the quality is a waste, + the poor Alpha support ruins it.
I don't feel good about the new year.
View detail
I have not received my order without any kind of communication.
If you have it in stock, please ship it quickly. View detail
Don't fuck with the customers.
I would never buy from this company, even if they are the only Manufacturer in the world. The customer service is arrogant and offensive. The corporate attitude is to be expected.
It's a local business and I want it to go away.
I would definitely not recommend it to everyone considering it.
View detail
Fits: BMW R850RT, BMW R850R, BMW R850R, BMW R1200ST, BMW R1200S, BMW R1150RS, BMW R1150RT, BMW R1150R, BMW R1150GS, BMW R1150GS, BMW R1100S, BMW R1100RS, BMW HP2 SPORT, BMW R1200RT, BMW R1200RS, BMW R1200R, BMW R1200GS, BMW R1200GS Adventure, BMW R900 RT 03-13, BMW HP 04-08
The build is fine.
I bought it because it's a pain in the ass to get the in-vehicle tools out.
It didn't work on the R1100RS.
It's a shame that the R1100RS was included in the fitment.
View detail