Reviews
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
good
I think it is worth buying because it can be used for various types of cars!
It would be nice to have one, especially for a 4MINI, as it will be used more often!
View detail
Cheap, but not easy to use.
[How is it used?
Used for Engine O/H of TZr50R.
In particular, a universal holder like this product is needed to remove the fixed nut of the Clutch.
Was the one you received as per Image?
We selected this product because it had the lowest Gold amount.
To be honest, I thought the cheap price would make the product quite poor, but it was not as bad as I expected.
The supplier may be the same as the ones offered by other Manufacturers because the pictures are the same.
How was your experience with it?
The ease of use is not all that great.
In the case of TZr, the fixed pin is hooked to the clutch housing, but the fixed pin is short and easily comes off,
I cannot apply force well. I have the impression that the size is not right for 4EUEngine, although it may be just the right size for other Scooters.
[Points to note]
Be careful not to put the fixed Pin in the wrong place.
I used it on two engines and accidentally put a pin on the bolt hole of the clutch, destroying the bolt hole.
How did it compare to other products?
Similar products are lined up at similar Gold prices, as if the suppliers are the same.
Once you buy one, it will last a lifetime, so you might as well get something a little more decent.
View detail
Maintenance of Chain, which I am not good at, could be easier.
I've only done simple cleaning when I sprayed oil in the past, so I think I can do it a little better from now on. View detail
Low price but sufficient Quality
The price of Motion pro was too high, so I went with this one. The price is a quarter of the price, but the quality is solid and this product should be sufficient. The box is just a bonus, and the lid closure is so roughly made that it won't close after a few uses. View detail
Spring Detachable
I purchased this product to use for removing and installing springs when removing and maintaining the Exhaust System.
The length is just right, no slippage or pain at the grips, and they are easy to use.
I don't use it that often, but it would be useful to have 1 pc.
View detail
Fits: HONDA CROSS CUB, HONDA SUPER CUB110, HONDA glom, HONDA SUPER CUB 50
Required for Flywheel removal
Required for Flywheel removal
Flywheel came off easily.
I don't use it except to remove the flywheel, so it seems expensive, but I can't work without it, so I don't have a choice.
View detail
Belt has no durability.
[How is it used?
I bought this for EngineO/H when Restore TZr50R.
I fixed the Flywheel with this product and removed the Crankshaft Nut and ClutchGEAR Nut.
Was the one you received as per Image?
The image was exactly as shown in the picture, and although there were several other manufacturers with similar pictures, Minimoto was the cheapest, so I selected Minimoto. I selected Minimoto because it was the cheapest price.
How was your experience with it?
The EngineO/H was successfully used and EngineO/H was successfully used.
However, Belt's durability was almost non-existent, and after a few uses, Belt's reddish coating was falling apart,
Although it can be used for a time, we worked with caution because shavings of the film could enter the Engine.
[Points to note]
When using it for engine O/H, the belt of the Flywheel side and the Holder must be degreased with parts cleaneretc. or it will not slide easily and cannot be fixed. Also, since the handle is short and it is difficult to apply the Torque, it is better to use a PVC pipe or similar to extend the length of the handle.
How did it compare to other products?
I have never used products from other manufacturers, but I have a feeling that the very cheap products sold on the Net are probably from the same supplier, so if you don't buy products from a proper manufacturer and price, you might as well buy Net products on the assumption that they will be crushed.
View detail
Required for Engine disassembly and assembly
This is a special tool needed when disassembling and assembling engines. I use it for disassembling and assembling MONKEY engines. View detail
Not for groms.
Purchased for installation of High Camshaft on Grom, but it was too short to fix. View detail
Used for CYGNUS6 type
Used to replace RaceBearing on CYGNUS Type 6
It seems to be strong and will last for a long time.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
AF24Giorno
Used for AF24Giorno.
Coil was easily removed.
View detail
Fits: HONDA CB900F, HONDA CBX1000, HONDA CB750F, HONDA CB1000C 83, HONDA CB1100F, HONDA CB900F, HONDA CB750F
Can be used for CB750F
I bought this to replace the ValveShim on my CB750F. The Honda-specific tool is already discontinued, so some people make their own. At first, I tried this Hondafor Vehicle. The actual tool is surprisingly small, but it's not to be underestimated:just insert the tip of the tool between the cam and push it in, and the valve lifter will drop and the shim will be easily removed. The cost is great, and it is truly a god tool. View detail
For Scooter.
I purchased this product to replace the drivetrain on my Scooter.
However, I used it first for bore up work on a friend's SUPER CUB.
It works without any problems.
View detail
Good tool if used as intended.
This tool does what you want if you use it for its intended purpose. I bought the Husqvarna flywheel to hold while tightening the nut. Some said it failed and didn't do its job. Don't use it to change the oil filters in your car or load your ex-girlfriend's tire and it should work just fine. The safest non-destructive way to hold the flywheel for removal of the highly torqued nut. Could use a stronger clamping shaft to hold things while re-torquing the nut during installation. Bends a little too easily. Also, the vinyl coating on the band is slippery on a smooth flywheel surface. Powdered resin solves the slip issue. I've used this on a few motorcycles, Honda and Husky and it still looks and works as it should. I recommend it. View detail
CRF100F (2007) Used in
Flywheel can be easily removed without any problem.
It is only a tool to remove Flywheel, so I wonder if it is cosmetic. Anyway, the Flywheel can be easily removed.
View detail
MINIMOTO Minimoto Tappet Adjustment Tool 3-Size Set
Fine-tuning of Valve clearance is more convenient than using ordinary tools
The accuracy of the tools is low and I would like to see the system a little more precise.
View detail
It is not a tool that is used so much in Private, but …
I had a Pin type Holder, but I bought it just in case.
It was more solid than I expected and the desired work went off without a hitch!
View detail
Fits: HONDA MONKEY, HONDA DAX70, YAMAHA Yamaha50ccScooter, YAMAHA GRAND AXIS, YAMAHA JOG90, YAMAHA AXIS 90, HONDA LEAD 90, HONDA MONKEY, HONDA Honda50ccScooter
Solidly built
Purchased for disassembly of Clutch.
It is well made, and although I purchased it for the Clutch maintenance of the Address100, it is still a generous Size and can be used for the MAJESTY250.
The shape is designed for use with Wrench, and it can be easily disassembled and reassembled.
View detail
It didn't work for BALIUS.
I used it for BALIUS, but the Center bolt could not be reached and was unusable.
The diameter of the center bolt is also slightly smaller.
I wanted to change the bolt to a longer one, but I could not find one on the Net because it was an M17 Opposite Thread Screw with a fine pitch.
The construction of the thing itself was good.
View detail
no problem
[How is it used?
To remove the center nut of the clutch
Was the one you received as per Image?
Yes
How was your experience with it?
It can be used with no problem, but you have to apply it firmly and straight.
Easily slanted
[Points to note]
Centrifugal for Clutch Band holder required
It said not to use Impact.
I used Impact when loosening lol.
It is only used when ClutchRose is used, so it is not likely to be used anymore.
View detail