Reviews
Used with Axle Nut
No problems with this product. I use it with Axle Nut on my off-road motorcycle.
For a moment I thought about substituting Pliers, etc., but then I thought, well, I'll just buy it and add another Socket! (Lol)
SIGNET is a Brand that I trust, so I chose them first based on cosmetics. The performance is also fine.
View detail
For removal of Stem Nut
I bought this for removing the Stem Nut when replacing the Top Bridge on my GSX1300R HAYABUSA.
It works fine, and it costs about 2000 yen if you buy it at Home center, so this one is cheaper.
Info:(Japanese only)
GSX1300R HAYABUSAStem Nut tightening Torque:90N
View detail
To the Magic Remodeling Base
[How is it used?
First of all, I would like to apologize to Manufacturer,... I am sorry.
NSR250R (MC21) I purchased this product because I could not turn the cylinder nut under the RCValve of the "R" with the tools I have on hand and had to make a magic modification.
Was the one you received as per Image?
It is a Nut with a 1/4 insert diameter that is quite short in overall length as advertised.
The texture and precision of the Socket are perfect.
How was your experience with it?
If you have ever removed the Cylinder on the Rear bank side of the MC21, you know that it is in a rather troublesome position.
I visited the blog of a person who has made his own by cutting cheap Nut and put it into practice.
As you can see in the photo, I thought I had pushed and shaved it down quite a bit, but the height was still very Limit.
I tried my best to turn the nut with my Spanner, but it was a hexagonal type, so I was able to hold it firmly and remove it safely.
[Points to note]
The insert angle is 1/4, so applying too much Torque is dangerous.
How did it compare to other products?
T2Racing offers a special tool for this nut, but it is so expensive that I was hesitant to buy it.
https://www.webike.net/sd/24576874/
If you plan to work on it a number of times and want to be sure it will work, you may want to buy it.
【Review】
I think the Nut itself is very well made and accurate.
It would have been best if there was a shorter one, but this product was the most suitable for my requirements, so....
It was quite a challenge, but I am glad that I managed to turn the nut.
View detail
I needed it for RamMount.
I was in a hurry to buy this Screw when I tried to install Ram Mount. I had no idea it was Inch. I chose this one in millimeter because I would never use Inch Screw in the future.
I have to look at everyone's Review properly before I buy.
They turned the Screw of Inch well.
View detail
Very easy to use socket holder
Mounted on Tool wagon which I always use in Garage.
Magnet will stick firmly to the steel plate.
Until now, it was necessary to use both hands to remove the Socket from the Holder, but the Magnet is so powerful that the Socket can now be removed with one hand.
I don't feel very Stress when I do maintenance and my work efficiency has improved.
I highly recommend it.
View detail
reliable Brando -- budget prices!! it is perfect -- it is -- ~.
reliable Brando -- budget prices!! it is perfect -- it is -- ~. View detail
reliable Brando -- budget prices!! it is perfect -- it is -- ~.
reliable Brando -- budget prices!! it is perfect -- it is -- ~. View detail
signet: -- SIGNET:1/4DR 1/4x3/8 socket-adapter product number: -- 11510 description of item [ ] -- [ -- size: -- overall-length: -- the outside diameter ] -- [ -- concave -- the socket of 3/8DR, etc. by the ratchet handle of 1/4DRx convex 3/8DR:26mm:11phi
signet: -- SIGNET:1/4DR 1/4x3/8 socket-adapter product number: -- 11510 description of item [ ] -- [ -- size: -- overall-length: -- the outside diameter ] -- [ -- concave -- the socket of 3/8DR, etc. by the ratchet handle of 1/4DRx convex 3/8DR:26mm:11phimm] 1/4DR, etc.
When using it .
View detail
Since other goods were ordered, it was enclosure, but to the die length (600 mm) of goods, since the box was small, it was aslant put in in three dimensions so that distance might be earned. it was put in as it is without care of health by the box --
Since other goods were ordered, it was enclosure, but to the die length (600 mm) of goods, since the box was small, it was aslant put in in three dimensions so that distance might be earned.
it was put in as it is without care of health by the box -- a sake -- the place of extension of which the upper part breaks through a container box and it jumps out, it obtains even if the hole is also opening the lower part to the box, and it jumps out by a few -- it was .
Although it was satisfactory to the goods themselves, I got it to be better for the packing method to think considerably.
Although connection of improvement hope was carried out by e-mail, since it is nothing (correspondence of what happening after that if it sells, but not knowing), in news, it writes in here.
View detail
He bought 8, 10, and 12 which are often used. Comparatively [ cheap ], I think that it is a level which the thickness of a socket does not worry, either. If it is a car with many complicated places, it can use for motorcycle maintenance enough at
He bought 8, 10, and 12 which are often used.
Comparatively [ cheap ], I think that it is a level which the thickness of a socket does not worry, either.
If it is a car with many complicated places, it can use for motorcycle maintenance enough at any rate.
View detail
He bought 8, 10, and 12 which are often used. Comparatively [ cheap ], I think that it is a level which the thickness of a socket does not worry, either. If it is a car with many complicated places, it can use for motorcycle maintenance enough at
He bought 8, 10, and 12 which are often used.
Comparatively [ cheap ], I think that it is a level which the thickness of a socket does not worry, either.
If it is a car with many complicated places, it can use for motorcycle maintenance enough at any rate.
View detail
SIGNET:3/8DR T-30 hex-lobe-bit-socket product number: -- 22866 -- merchandise information goods detailed size:T30 -- tip outside diameter size (mm):5.52 screw-thread size: -- M6-7 plug angle (inch DR): -- three eighths. Socket Outside-diameter (mm):17
SIGNET:3/8DR T-30 hex-lobe-bit-socket product number: -- 22866 -- merchandise information goods detailed size:T30 -- tip outside diameter size (mm):5.52 screw-thread size: -- M6-7 plug angle (inch DR): -- three eighths.
Socket Outside-diameter (mm):17.8 overall-length (L1;mm): -- 49 axis length (L2;mm): -- that of 23 plug angle 3/8 inch DR -- KUSUROBU bit socket.
View detail
It is solid in reasonable Kami and I thought that it was a recommend.
It is solid in reasonable Kami and I thought that it was a recommend. View detail
It is solid in reasonable Kami and I thought that it was a recommend.
It is solid in reasonable Kami and I thought that it was a recommend. View detail
It is solid in reasonable Kami and I thought that it was a recommend.
It is solid in reasonable Kami and I thought that it was a recommend. View detail
It is solid in reasonable Kami and I thought that it was a recommend.
It is solid in reasonable Kami and I thought that it was a recommend. View detail
It is solid in reasonable Kami and I thought that it was a recommend.
It is solid in reasonable Kami and I thought that it was a recommend. View detail
Easy to use
It is a very effective tool in tight places where Straight cannot reach the tool.
The joint also moves well to reach the target point and loosen the bolt&nut.
View detail
Easy to use
It is a fairly inexpensive universal joint, but the quality is good and the tool is satisfactory enough.
It moves well and is easy to use for working in tight spaces.
View detail
having a wide range of protection
The surface is mirrored for a high-end appearance.
The surface contact type ensures that the torque is firmly applied and does not damage the bolt nut.
View detail