- Home
- Product reviews
- Tools
- Hand tools
- Sockets
- 1/4 in. Metric Sockets
- To the Magic Remodeling Base... (SIGNET: 1/4DR Short socket)
【SIGNET】1/4DR Short socket Review
To the Magic Remodeling Base
[How is it used?
First of all, I would like to apologize to Manufacturer,... I am sorry.
NSR250R (MC21) I purchased this product because I could not turn the cylinder nut under the RCValve of the "R" with the tools I have on hand and had to make a magic modification.
Was the one you received as per Image?
It is a Nut with a 1/4 insert diameter that is quite short in overall length as advertised.
The texture and precision of the Socket are perfect.
How was your experience with it?
If you have ever removed the Cylinder on the Rear bank side of the MC21, you know that it is in a rather troublesome position.
I visited the blog of a person who has made his own by cutting cheap Nut and put it into practice.
As you can see in the photo, I thought I had pushed and shaved it down quite a bit, but the height was still very Limit.
I tried my best to turn the nut with my Spanner, but it was a hexagonal type, so I was able to hold it firmly and remove it safely.
[Points to note]
The insert angle is 1/4, so applying too much Torque is dangerous.
How did it compare to other products?
T2Racing offers a special tool for this nut, but it is so expensive that I was hesitant to buy it.
https://www.webike.net/sd/24576874/
If you plan to work on it a number of times and want to be sure it will work, you may want to buy it.
【Review】
I think the Nut itself is very well made and accurate.
It would have been best if there was a shorter one, but this product was the most suitable for my requirements, so....
It was quite a challenge, but I am glad that I managed to turn the nut.
ไปที่ฐานปรับปรุงเมจิค
[มันใช้ยังไง?
ก่อนอื่น ฉันอยากจะขอโทษผู้ผลิต... ฉันขอโทษ
NSR250R (MC21) ฉันซื้อผลิตภัณฑ์นี้เพราะฉันไม่สามารถหมุนน็อตกระบอกสูบใต้ RCValve ของ "R" ด้วยเครื่องมือที่มีอยู่ได้ และต้องทำการแก้ไขพิเศษ
คุณได้รับตามภาพหรือไม่
เป็นน็อตที่มีเส้นผ่านศูนย์กลางเม็ดมีด 1/4 ซึ่งมีความยาวโดยรวมค่อนข้างสั้นตามที่โฆษณาไว้
พื้นผิวและความแม่นยำของ Socket นั้นสมบูรณ์แบบ
ประสบการณ์ของคุณกับมันเป็นอย่างไร?
หากคุณเคยถอดกระบอกสูบที่ด้านข้างด้านหลังของ MC21 คุณจะรู้ว่ามันอยู่ในตำแหน่งที่ค่อนข้างลำบาก
ฉันเยี่ยมชมบล็อกของบุคคลที่ทำด้วยตัวเองโดยการตัด Nut ราคาถูกและนำไปใช้จริง
อย่างที่คุณเห็นในภาพ ฉันคิดว่าฉันได้ผลักและโกนมันลงไปพอสมควรแล้ว แต่ความสูงก็ยังจำกัดอยู่มาก
ฉันพยายามอย่างเต็มที่แล้วที่จะหมุนน็อตด้วยประแจปากตาย แต่มันเป็นแบบหกเหลี่ยม ดังนั้นฉันจึงสามารถจับมันได้อย่างมั่นคงและถอดออกได้อย่างปลอดภัย
[ข้อควรทราบ]
มุมของเม็ดมีดคือ 1/4 ดังนั้นการใช้แรงบิดมากเกินไปจึงเป็นอันตราย
เปรียบเทียบกับผลิตภัณฑ์อื่น ๆ ได้อย่างไร?
T2Racing เสนอเครื่องมือพิเศษสำหรับน็อตตัวนี้ แต่มันแพงมากจนฉันลังเลที่จะซื้อ
https://www.webike.net/sd/24576874/
หากคุณวางแผนที่จะใช้งานหลายครั้งและต้องการให้แน่ใจว่าจะใช้ได้ คุณอาจต้องการซื้อ
【ทบทวน】
ฉันคิดว่า Nut นั้นทำออกมาได้ดีและแม่นยำมาก
คงจะดีที่สุดถ้ามีอันที่สั้นกว่านี้ แต่ผลิตภัณฑ์นี้เหมาะกับความต้องการของฉันมากที่สุด ดังนั้น....
มันค่อนข้างท้าทาย แต่ฉันก็ดีใจที่สามารถไขน็อตได้