Reviews
I should have bought sooner
Until now, the company's L-Type Quantity:It was opened and closed by twisting and turning it with Set's.
I had been thinking of getting a Type T for some time, but had held off because I thought the work time would be much the same.
However, as I got older, I changed my mind and decided that I wanted to have as much fun as possible, so I took the plunge and bought a frequently-used Size one.
When I used it, the work efficiency was different!
I regret that I have wasted my time so far.
View detail
I have never licked it.
It is often used for Motorcycle maintenance.
I have never licked with this one, so the quality of accuracy etc. is indeed KTC, I can't use cheap ones like No Brand.
View detail
Hexagonal has it all at KTC!
Hexagonal sockets are available at KTC.
The accuracy is good and helps Screw not to nudge.
View detail
It is heavy and goes easily into the Screw hole.
I had an Allen Wrench made by a manufacturer at home for a long time, but it had rust on it extensively and the hexagonal screw was going to be damaged every time I used it on my motorcycle because of the sharp hexagonal point on the end of it.
[How is it used?
Various sizes of hex bars are available in Quantities:The set is widely compatible with Motorcycle's hexagon socket screws.
Was the one you received as per Image?
It has a high quality feel as shown in the image and looks scratch resistant due to its dull luster.
How was your experience with it?
There is almost no rattling even if the screw is moved after insertion, and it seems that the screw hole will not be violated. There is also a ball point on the screw that allows for quick turning of the screw once loosened.
[Points to note]
As mentioned in the manufacturer's note, it is better not to use it on the ball point where high torque is applied. When using it, it is recommended to use it for fast turning instead of tightening the screw.
How did it compare to other products?
Compared to the non-Manufacturer products we have had in our house for a long time, the precision, weight, and ease of use of these products are all far superior.
Although the regular Allen Wrench without ball point is also available, we recommend this product because it is more convenient and can be turned quickly, even if you have to spend a little more money.
View detail
For maintenance
Motorcycle maintenance is based on this quantity:Set almost solves the problem, doesn't it? View detail
It is found useful in the place into which it does not go in a narrow place straight with a ball point.
It is found useful in the place into which it does not go in a narrow place straight with a ball point. View detail
Easy to use
It is a quintessential KTC and very easy to use.
It is highly accurate and does not get stuck tightly in Bolt and lick it.
It is a good product that is very easy to use.
View detail
of high quality
It was like a quintessential KTC.
Easy to use and highly accurate, it grips tightly to the Bolt and does not lick.
Very easy to use
View detail
Easy to use
It is a combination of Ball point and Long, so it is very easy to use.
Hexagonal Wrench is indispensable for maintenance and is available in Quantities:Set, so that the
This one can be used for everything. The quality is also very good.
View detail
easy to hold
It is indeed KTC.
Compared to a regular Hexagonal Wrench, it is easier to grip and apply force, so it is possible to apply Torque firmly and turn the Bolt reliably.
Long and easy to reach Bolt in tight places to increase serviceability.
View detail
Can use
It's a small turnaround, and it's
All required Sizes are in Quantity:It is convenient because it is a Set.
We can work in places that Socket's Bit can't get into.
It is more convenient to have it.
Since it is made by KTC, it is well made.
It was also accurate and did not tarnish.
Good tool.
View detail
Finally, a new one.
I have been using a SEK Socket that I bought more than 20 years ago, but even after applying screw lock and tightening it many times, the screw kept loosening and the bit kept falling out. The other day, when I replaced the Bolt of the Rear Sets, I damaged the hexagonal hole of the Bolt. Until recently, I had not had the opportunity to tighten the 5mm bolt too hard, so I was able to use it with patience, but I finally reached the end of my patience and decided to replace it.
The KTC 6mm Hexagon bit socket, which I purchased at the same time as the SEK 5mm socket, and which I had many opportunities to use, is still in good condition and can still be used after more than 20 years, so I chose KTC.
I turned a few bolts to try it out, and while I was not impressed, it seemed to be a safe and reliable choice.
I have a lot of inexpensive tools that I have bought over the years, but since a few years ago, I have been replacing them with more accurate ones for Socket etc. that I use frequently. However, since a few years ago, I have been replacing my Socket, etc., which I use a lot, with ones that are more accurate. In my mind, KTC is the best choice in such cases. I like KTC for some reason, but I have been using KTC products for a long time, and the fact that I haven't had any problems with them may be the Large Threshold. I think that KTC's tools have a good balance between price and quality, and I can use them with confidence.
View detail
It is easy to apply force.
Compared to the L-shaped Hexagonal Wrench, the Hexagon Bolt is easier to grip and apply torque to. View detail
As expected of KTC
Because it seems to be coating with something materially, it is not so when I thought that it might be bald while using it, and it is possible to use it enough with accuracy even if it is cheap, as expected of KTC. View detail
Easy-to-use standard product
FOR JAPAN MODELThis is the Hexagonal Wrench Set by KTC, one of the best model brands in Japan.
It has enough Size for Motorcycle maintenance, so as long as you buy this, it is Large sturdy as long as you don't have too much trouble.
In general, HEXBolt is easy to nudge, so it is better to have a good precision tool.
In this respect, I think that KTC has enough quality even if it cannot be said to be the highest quality product.
It is easy to use for intricate work because of its long size and ball point.
I've also heard that if you hold the long end and apply Torque to it to the extent that it bends lightly, it will generally be about the right Torque.
I'm sure that's about it by hand…?
The latest motorcycles have a narrower range of on-board tools, so it's a very simple job. (Like retightening a loose Mirror root). You will often need a separate tool to do this.
It is difficult to get a hold of MAJOR tools such as KTC because of the price, but this Hexagonal Wrench Set allows you to get in touch with a good tool at a price that is easy to reach, so you can recommend a tool for the first time.
View detail
Exactly onboard tools
KTC for peace of mind
I bought this for automotive tools. Don't use the wrench set of 100 yen shop even if it is a car tool.
There is a limit to the number of tools that can be used with on-board tools. What kind of Quantity:How to build a Set? This is also a fun problem.
View detail
That's KTC!
It's an essential Tool in Motorcycle!
The accuracy is so good that you'd think it was made by KTC!
View detail
LWrench is good enough for most of the time.
I used it to remove the fixed Bolt of the Exhaust System
It's not impossible to remove it with LWrench, but it's too far back.
I bought this one because I couldn't turn it around, so I thought I'd rather struggle with it.
View detail
KTC.
I can't tell the difference between this and some other no-name manufacturers in a similar price range.
Maybe there is a difference when removing the Solidly tightened Bolt in the O-Battlec!
But I have a sense of security that it is KTC.
View detail
Thank you for your help with XR250MOTARD.
When I replaced the main jet of the carburetor, the Hexagon Bolt of the 5mm head of the carburetor and the mani seam, I think, was tanned and it was difficult for the wrench to enter. But when I went to the motorcycle shop near my house to borrow a tool, I found this one with a very short tip. I was able to do the work safely thanks to this. By the way, the motorcycle shop had more than one of the same tool, so I was able to get it for 100 yen. View detail