Reviews
I feel this is enough for Sunday mechanic
[How is it used?
I purchased this product to remove and install the snap ring for the rear master cylinder O/H of my YAMAHA/XJR400R. I chose KITACO because they are relatively inexpensive among various manufacturers.
Was the one you received as per Image?
It was exactly as shown in the Image. It is larger than I expected, so it has some presence in the tool box.
It may be surprisingly troublesome to store the Head section.
How was your experience with it?
I had no problems using it. The only thing I have to say is that the tip seems to be quite fragile, so if you handle it poorly, you may end up chasing it. Also, the Instruction Manual is on the back of the container, so it is hard to dispose of it...
[Points to note]
The tip is a delicate part and can be easily broken if handled roughly, so care should be taken.
How did it compare to other products?
Are the cheap ones still from the same supplier? I looked around and found the same thing.
But even if you buy the expensive ones, they are Sunday mechanic, so they are used less often.
Therefore, we think it is a good idea to use these cheap products with crushing vigor.
View detail
Versatile Tool
[How is it used?
Purchased as a replacement for Ratchet, MONKEY Wrench, and
When I go to Course for practice, I don't want to bring a lot of tools with me, so I can use this one PC for all kinds of things.
It is very convenient to keep it in the car as a tool in case of emergency.
As soon as I bought it, I was practicing on Course when my footpeg bent and I had to use it as a first aid kit.
There are various sizes available, but 250 seems to be the iron plate, so you can't go wrong if you purchase this size first.
View detail
Convenient to have
I purchased this to replace the Rear Sprocket on my APE 100.
The result was not easy to do because it was not spread out enough, but I was able to remove it.
This is a caution for those who use the same application.
But it is useful to have, so it is good to have.
View detail
Used in Brake related.
I really need it in MASTEROverhaul.
Yeah, this is the guy.
Snap ringFryer。
It's a problem if you don't have it, but you may be surprised to find it in your own tool box or among the tools you have put together on the go.
The tip breaks off, etc.
There are better quality tools available, but I think this is fine for Sun Machine.
Due to the structure that can be attached and detached, it is not very strong or forceful.
If you are not careful when working, you may skip the snap ring, so it is better to support it with a radipen or the like.
View detail
cheap
It works fine
It's not much of a turnout, but it can be used for 3Pattern and the price is very reasonable.
Too easy.
I tried to get them in Knipec Fat.
I decided to go with this one because it's more expensive.
I'm satisfied
Recommended items
View detail
I didn't use it except when I thought I would...
If you had it, you'd use it!" I bought it, but did not have the opportunity to use it as much as I thought I would.
I used it when I was taking apart a carburetor with a broken cook on a SPADA fuel tank, but to put it another way, that was the only opportunity I had...
It's a good tool to use, but...
View detail
Although only the band holder was used until now and the size adjustment of the band was troublesome to the degree which is desorption, after using a one-touch pulley folder, there is also no time and effort of size adjustment, and it could manage work ve
Although only the band holder was used until now and the size adjustment of the band was troublesome to the degree which is desorption, after using a one-touch pulley folder, there is also no time and effort of size adjustment, and it could manage work very comfortably.
The price is a tool which cannot be parted with once texture is also strong and it gets used to it, although it was somewhat high!
View detail
Quantity:Set items are a bargain!
Quantity:It is a Set item, so it is a good value.
The nails can be replaced, so they can be used in a variety of ways.
I will end up buying a dedicated product, but for now, this is what I use for Rose.
View detail
Easy to use
Even the tip of the pliers is elaborately made with an easy-to-hold, non-slip Grip.
Quality is high for the price.
It is useful because it is easy to use for everyone and is a standard type of radio pliers.
View detail
So-so Standard.
It's just regular Radio pliers if you ask me.
If you want to buy any kind of radio pliers, you can buy them at a hundred-yen store, but the quality of the good ones is higher than the price.
”If you want a good rad pen”, you can go with KTC without thinking twice, but I think you'll be more satisfied if you work a little harder and go with something around KNIPEX.
The size is easy to use for general purpose.
Personally, I prefer not to have the Nipper part because I have a Nipper separately, but this is not a part that I particularly care about because it is more common to have it.
The sense of precision is excellent, and there is no rattle in the joint parts.
However, the tip is thin & the rigidity is disadvantageous because it is long, so it does not have the same grip as normal Pliers, although it has anti-slip processing.
That said, I think it's an excellent rad pen. (My personal opinion)
The Grip is cast resin, so it's gentle on the hand, and it doesn't seem like the resin will come loose again.
In general, the texture and ease of use are good enough to recommend this product if you want a ”good rad pen”.
View detail
The thing that grabs you is KNIPEX!
It's just normal Pliers, if you ask me.
Pliers itself is something that you can buy at a hundred-yen store if you want, but the quality of the good ones is high for the price.
If you want ”good Pliers”, you can go with KTC without thinking twice, but I think you'll be more satisfied if you work a little harder and go with something around KNIPEX.
The size is easy to use for general purpose.
Personally, I prefer not to have the Nipper part because there is a separate Nipper, but this is not a particularly important part because it is more common to have it.
The sense of precision is excellent, and there is no rattle in the joint parts.
In addition, since the engagement part is sharply processed, it can be gripped firmly, but on the other hand, it is necessary to be careful not to damage the other side.
The Grip is cast resin, so it's gentle on the hand, and it doesn't seem like the resin will come loose again.
In general, it has a good texture and ease of use, and is fully recommended if you want a ”good Pliers”.
View detail
Expensive but good.
I bought 4411-J1 for Overhaul of Brake master.
If the correspondence range is 12-25mm, and it is this use for Motorcycle, it will be Large strong almost by this one.
The replaceable ones are not stable and difficult to use, and the ones I used had a bad tip shape and were destroyed by fatigue during work.
As expected of KNIPEX, the tip is designed in such a way that it grips the Ring and does not let go, preventing fatigue fracture.
If you're looking for your first pair of Snap Ring Pliers, this is a great place to start.
View detail
Standard shape and easy to use
These Radio pliers are affordable, easy to use and are a classic type for anyone. This is the best radio pliers for beginners to veteran mechanics. View detail
It's different, isn't it?
One Pliers makes all the difference in the accuracy of the destination.
I use it when I want to remove the hose clip.
What's with the ease of grip on similar items?
View detail
It can be used for various Clips.
These pliers are designed to remove BumperClips and FenderLiner Clips that have sand embedded in them without cracking. The tip is long and thin, so you can reach narrow places and remove clips without stress. View detail
LOBSTER H Pliers
LOBSTER pliers are of good quality. But I wanted it to be better. Pliers are made of metal. Covered on top with ionodirovany. The contact surface between each other is small, I would like it to be larger. And also the distance between the holding jaws of the pliers is adjusted. It is convenient to use them. View detail
Cheap and multifunctional
I bought this to overhaul my Brake Master Cylinder.
It comes with four different tips, and by changing the direction in which it is inserted into the Grip, you can change the direction of the tip.
It can be used for both shaft and hole. The angle of the tip can also be changed, which is convenient, but storage Case
is not attached to the product, and the plastic Package of the product is used as it is.
It is not a tool that is used that often, but it is convenient to have because of its low price.
I think so.
View detail
Enough for the Sunday mechanic.
I bought this to use on my TZr50R Brake master Overhaul.
The deciding factor in the purchase
I was not sure if it was a three-pronged type. I bought this type because I was worried that the C-ring of TZr50R's front side brake master might not be able to be removed.
I also chose this replacement Type because it was cheap and I had used other products from Ethos Design, so I could be assured of its accuracy. (The other ones are the same color and shape, so I have a feeling it's OEM from somewhere else.)
[Impressions of using it]
First of all, I was able to take the C-ring successfully.
The tip was solid and there was no C-ring flying off in the process.
However, as mentioned above, the C-ring is quite deep, and as it was, it interfered exquisitely and could not be grasped, so I was able to use it by shaving a little.
I haven't used it on the for Shaft C-ring, but I think I can use it there without any problem.
I would like to see some improvements.
It becomes a personal thing, but because I was able to work smoothly if it was made small even if it was 0.5mm more overall, I felt that it was even better if it became Small Type.
Also, I would have appreciated a bag or Case for storage as I had nothing to put it in after the work was done and my nails would have been RoseRose.
Products compared
I compared this product with KTC's and SIGNET's Pliers. I decided to buy this product because of the function, price, brand, delivery time, etc.
When I was writing this impression, I noticed that KITACO and Professional tools are also offering the same thing, so I think it is good to compare them according to the stock status and price.
【Review】
I think it is a good product because it is easy to use, low price and can be used both for Shaft and for Hole.
I thought it would be good to compare the delivery time and the price because the same product comes out from each Manufacturer.
View detail
It is not slippery.
The Grip is easy to hold and grip, and the angle of the tip of the Pliers is so good that once you hold the Snap ring, it will not slip off. It's a great way to save time and increase efficiency. View detail
It's easy to hold and grab.
The handle is long enough to hold Pliers firmly with good grip. The tip of the handle is very strong and resistant to bending and slipping, so you can grip things with confidence. It's elaborately made, easy to use and durable, so it will last a long time. View detail