Reviews
I will never buy from them again.
I used it to disassemble the front fork of a scooter, but the tip broke off immediately. In the end, I used a thousand pieces of the same piece in a quantity of 1,000.:I bought 2pcs and managed to remove the C-ring. View detail
Good accuracy
I had been using cheap valves and Type radio pliers, but I decided to go with a proper Manufacturer's product, so I chose KTC's Radio pliers.
Even with a strong grip, there is no gap at the tip, and the precision is as expected.
View detail
With this.
Minimum required tools.
If you are going to modify the electrical components yourself, at the very least, this should be enough to make the Large sturdy.
There are cheaper ones, but they are difficult to use or lack Size….
If you look above, there is no Drill, so for now, here is the Recommendation.
View detail
There are three mouths.
Snap rings are often used to hold down the Kick Arm axis of a moped scooter.
LargeIn the past, I used radio pliers and pick tools as substitutes. It was still inconvenient, though it was usable for the time being, and it took a lot of time and effort to remove the Ring by holding it down and almost scratching the Aluminum case.
My senior recommended me to buy a dedicated pliers and I used it for many years, but the tip of the mouth broke off and I could no longer use it. Once you know the taste of dedicated tools, you can't stand the inconvenience. The last time I used this type, I had to replace the mouth, but the target was not always the same snap ring, and I didn't want to go through the trouble of finding a different mouth each time, so this time I bought SK11's one type with three mouths. It takes up more space in the tool box, but in terms of total area, it is no different from the mouth-changing type. It can't be used in deep places, but I don't plan to use it for anything other than my Dio, so that's not a problem. It is a tool that I don't use very often, but the price is not as high as before. If I need another type, I can buy it again.
After all, Snap ring is not something to work with a substitute tool. We also felt that just using this tool would save time.
View detail
Good thing it came in a two-pack.
In the summer, when we replaced the radiator hose, two of the OEM hose bands reached their limits, so we had to use a hose band purchased at Home center as a stopgap measure. In the meantime, the Material:The Stainless Steel one served its function, but the band was 13mm wide and I didn't like the look of it.
When we went touring the other day, there was a small amount of coolant leakage from the hose that connects to the Radiator, which splashed around and stained a part of the Engine white. Needless to say, I washed the affected area as soon as I got back because coolant has a bad effect on the paint.
There were no coolant leaks for a while after the hose was replaced, so we assumed that the band had loosened. It might have been OK to retighten the band as it was, but we decided to replace the band because it might loosen again and we did not like the appearance of the band.
Among the many hose bands available, we selected the DAYTONA band, which is narrow at 8mm in width and can hold two hoses, but is also Reasonable. However, the Radiator hose at the location where I wanted to tighten is about 32mm in diameter, and this product can be used from 25mm to 50mm, but there would be a surplus of large size. Unfortunately, DAYTONA does not sell a product in the correct size.
I decided to replace the Band and broke the first one. I tightened the screws too hard to make sure they were tight enough, since they had leaked coolant, but the screws spun around and damaged the Band, rendering it unusable. The second one was tightened carefully and firmly, and the coolant leak was solved.
The second one was going to be used to replace the band on the Hose under the tank the next time I remove the tank, which is a shame. I regret that I was not careful when tightening it in.
View detail
Savior of the Rusted Screw!
I had Neji-saurus, but I bought additional KNIPEX!
And comparison
Strength to add Screw with the mouth.
The Neji-saurus has a longitudinal groove cut into the end of the pliers.
The size is not adjustable, so there is a limit to the diameter that can be held in the mouth. Moreover, since the size cannot be adjusted, the ability to grip is limited by the diameter of the screw.:Pair (for Left and Right) It will be….
KNIPEX can widen the mouth with a slip joint, so almost all
You can grab it at the best Point to Screw.
This difference is anyway Large tight!
Ability to grab on to something other than the mouth
KNIPEX is diamond-shaped and holds three points, so it can be gripped firmly.
In addition, the slip joint can be adjusted to suit the object to be gripped!
The Neji-saurus engages all the way when closed, so it is good for gripping thin objects, but difficult to grip objects with a Large diameter or thicker objects….
Conclusion
You should definitely buy KNIPEX from the beginning!
When I bought Neji-saurus, they didn't sell KNIPEX Slip joint pliers yet... Crying
View detail
A clear difference in grasping ability!
I've been using Pliers for a few hundred dollars from Home center,
Since it is a gripping tool that is used rather often, go to KNIPEX of trust.
Prices are also high enough to betray your trust, though (sweat)
I think you can tell from the pictures,
The machining accuracy of the tool is levechi !!!!
Oh my, how easy it is to use (laughs).
I've left it in place, but the home center tool is not in use.
The basics are gone!
Good tools are the ones you use most often!
It's seriously inspiring!
View detail
Need to buy two of them, for Shaft and for Hole!
I used to use a very inexpensive for-hole and for-shaft combination from Asphalt.
Lots of rattles and poor workability.
So I bought a hole, for Shaft, from top quality KNIPEX anyway!
In the case of Asphalt, the parts you remove can fly away due to rattling and be lost.
But if you align the holes and for shafts independently, you can get the same results.
Well, all of those failures will be eliminated!
I want to use good tools and do good maintenance comfortably and without waste anyway.
I guess so!
It's a tool that PRO just raves about!
Well, the price is also PRO price….
View detail
There is a reason why expensive tools are expensive!
Only for tools that are rarely used,
I have been using a tool made by Asphalt that can be used for both for Shaft and for Hole.
I used to use it, but maintenance is part of my hobby.
We are replacing them with better tools little by little!
What's best is the feeling that when you grab it, it won't let go!
As for the as-fat, for the amount that both can be used with the earlier replacement.
There was a lot of rattling, and when I took it off, I had to skip it and look for parts.
Sometimes I have to do it …. This is a waste of time and effort.
KNIPEX has no such problems so far!
If you consider maintenance as a hobby, buy it!
View detail
I've been using A Fat for years, but the accuracy of Crimping is totally different!
I bought it at Home center when I started messing around with Motorcycle.
A Fat Electric PliersQuantity:Set
I've been using this for many years, but I'm not sure if it's possible to make a Bullet Terminal during the Wiring process or not.
I'm getting frequent, so I got excited and went to KNIPEX.
A Fatty is more multifunctional and has a Scissors section that cuts off wiring.
What's easy to use is easy to use,
In terms of Crimping, once you pinch it.
After deforming the Bullet terminal to some extent, it is like this Crimp.
KNIPEX is hard to cut because Wiring cut is in the middle.
But when Crimping, just hold it without thinking and you can Crimp on Beauty!
The difference is really huge!
It's an emotional Level.
So, A Fat is in storage (laughs).
View detail
Similar to Pliers.
It is the same as Pliers and is well made and easy to apply force.
It also operates smoothly, so it is not a cheap product.
It is useful for detailed work, etc.
I have some Rust recently, but would like to maintain and use it.
View detail
Used for many years
It is easy to grip and apply force, so it is Firmly attached.
It is quite useful because it is sometimes used in various scenes unexpectedly.
Accuracy is good and no Wobble.
View detail
I feel this is enough for Sunday mechanic
[How is it used?
I purchased this product to remove and install the snap ring for the rear master cylinder O/H of my YAMAHA/XJR400R. I chose KITACO because they are relatively inexpensive among various manufacturers.
Was the one you received as per Image?
It was exactly as shown in the Image. It is larger than I expected, so it has some presence in the tool box.
It may be surprisingly troublesome to store the Head section.
How was your experience with it?
I had no problems using it. The only thing I have to say is that the tip seems to be quite fragile, so if you handle it poorly, you may end up chasing it. Also, the Instruction Manual is on the back of the container, so it is hard to dispose of it...
[Points to note]
The tip is a delicate part and can be easily broken if handled roughly, so care should be taken.
How did it compare to other products?
Are the cheap ones still from the same supplier? I looked around and found the same thing.
But even if you buy the expensive ones, they are Sunday mechanic, so they are used less often.
Therefore, we think it is a good idea to use these cheap products with crushing vigor.
View detail
Poor.
I bought it because I thought it was cheap and good that the tip could be replaced.
The downside of the tip replacement is that it often hits too many areas and cannot reach tight spots.
The C-ring is so hard that the tip is useless because it is wobbly.
At any rate, I can't RECOMMENDATION because there are so many irritating POINTS.
We managed to finish the work, but it was a Level we never wanted to use again.
Tools are Large stamps.
View detail
Versatile Tool
[How is it used?
Purchased as a replacement for Ratchet, MONKEY Wrench, and
When I go to Course for practice, I don't want to bring a lot of tools with me, so I can use this one PC for all kinds of things.
It is very convenient to keep it in the car as a tool in case of emergency.
As soon as I bought it, I was practicing on Course when my footpeg bent and I had to use it as a first aid kit.
There are various sizes available, but 250 seems to be the iron plate, so you can't go wrong if you purchase this size first.
View detail
Overhaul of Master Cylinder
It is very useful when doing overhaul of the brake master cylinder.
It is a Copy product of HondaOEM tool, but it is durable and easy to use.
I use it a lot for my work, so the price is not expensive and well worth it.
View detail
Convenient to have
I purchased this to replace the Rear Sprocket on my APE 100.
The result was not easy to do because it was not spread out enough, but I was able to remove it.
This is a caution for those who use the same application.
But it is useful to have, so it is good to have.
View detail
I am Garbage.
I was expecting it to be dedicated to Bullet Type Terminal, but this is Garbage.
The Wiring and Clothing sections can only be Crimped at the same time in one time, so the positioning is very severe.
Even so, the Crimp section is so thick that it is almost impossible to see where the Wiring is located.
Even when it was finally done, the crimped shape was flat and uneven.
A Caulking Tool, which costs less than 1,000 yen, will give a cleaner and more reliable finish.
I used it a few times the day it arrived and it went to the Garbage bin.
View detail
Safety wire wrap/cutter
I gave a place in my toolbox.It's definitely a luxury item, but I think it's worth it. They make setup very easy and work exactly as you hope. The quality and feel won't surprise you, but they're good for the price. The cutter isn't great and for some reason it doesn't work close enough to the pivot point which is kind of annoying Handles safety wire like a champ, could use cutting edge run all the way to joint, there is a about a 1/2" where there is no cutter but that is nit-picking. Used it on three sets of grips with no issues.cut through the wire fine without damaging themselves, and I expect them to hold up for a long time View detail
COBRA Cobra XS Water pump pliers
The size is large enough to fit in the coin pocket of Jeans. View detail