Reviews
Trusted KTC
[How is it used?
Purchased a new Driver because I lost the one I had been using.
I bought this product because I thought, "If I'm going to buy something, I'm going to buy KTC!
Was the one you received as per Image?
It was as per Image as it was a product I had originally seen.
How was your experience with it?
It is easy to grip and use, and I felt that it is a Driver that I will be able to use for a long time to come. The construction is solid, so I think it is a large difference from cheap drivers.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
The smallest and lightest Merit is the Large Merit.
I bought this to play with the carburetor part on the go. To be honest, it is cheaply made and hard to turn.
The small size and light weight make it easy to carry around.
If possible, I would have liked to have a part to attach a Key Holder.
View detail
Are non-Motorcycle uses more frequent?
So far "Large" When "Inside Although I had a Driver for the "Small" was purchased because he did not have one.
[How is it used?
Motorcycle in general, and all other products that use +Screw in general, but where and how often it can be used. "Inside The Driver is much less than the Driver in the "Mere Old Man". However, it is just fit to the +Screw that stops the back cover of the mobile training game that was popular more than 20 years ago.
Was the one you received as per Image?
The one I received looked as high quality as the picture and had a thin coating of rust-proof Oil on the tip.
How was your experience with it?
It seems to fit very well in the hand, and the grip is very firm, so it will be easy to put on and off the Screw.
However, since the grips are too tight, it is better to use a little more force when using it on a part that should not be tightened too much.
[Points to note]
Select and use the appropriate +Driver number for the appropriate +Screw.
How did it compare to other products?
until now "Inside I've been using only the +Driver of the "Small" This is the first time for me to use the type of Driver in the "1" series, but the accuracy, ease of use, and fit feel are good.
Also, my personal impression is that the Plus and Minus Screwdriver Sets are sold separately, but perhaps
I don't think I'll be able to use all of them, so as far as drivers are concerned, I only buy what I need from Single Item sellers.
I think it would be a good idea to do so.
View detail
This is the most universal driver with a large size.
It became the number one Driver that I often use for both Motorcycle and products that use +Screw, and I bought it because the Vessel +Driver that I had at home was worn out.
[How is it used?
It can be used for all Motorcycle and other products that use +Screw, and since it is the most frequently used number driver, it can be used in a wide range of locations.
Was the one you received as per Image?
The one I received looked as high quality as the picture and had a thin coating of rust-proof Oil on the tip.
How was your experience with it?
It seems to fit very well in the hand, and the grip is very firm, so it will be easy to put on and off the Screw.
However, since the grips are too tight, it is better to use a little more force when using it on a part that should not be tightened too much.
[Points to note]
Select and use the appropriate +Driver number for the appropriate +Screw.
How did it compare to other products?
Compared to the worn Vessel +Driver, the accuracy, ease of use, and fit are still improved.
Also, my personal impression is that the Plus and Minus Screwdriver Sets are sold separately, but perhaps
I don't think I'll be able to use all of them, so as far as drivers are concerned, I only buy what I need from Single Item sellers.
I think it would be a good idea to do so.
View detail
Compatible with Handlebar Weightetc. screws
Purchased because I had an inaccurate +Driver at home and had almost licked the Screw when servicing it.
[How is it used?
Screws with Handlebar Weight installed and screws of OEM Exhaust Cover of MONKEY50 are now supported.
Was the one you received as per Image?
The one I received looked as high quality as the picture and had a thin coating of rust-proof Oil on the tip.
How was your experience with it?
It seems to fit very well in the hand, and the grip is very firm, so it will be easy to put on and off the Screw.
However, since the grips are too tight, it is better to use a little more force when using it on a part that should not be tightened too much.
[Points to note]
Be careful not to over-tighten when using this product in areas where tightening Torque is not very high.
How did it compare to other products?
Compared to T-drivers made by other manufacturers, the accuracy, ease of use, and fit are far superior.
Also, my personal impression is that the Plus and Minus Screwdriver Sets are sold separately, but perhaps
I don't think I'll be able to use all of them, so as far as drivers are concerned, I only buy what I need from Single Item sellers.
I think it would be a good idea to do so.
View detail
KTC Slotted screwdriver
It felt good in my grip and I was able to apply force well.
I was able to successfully remove the screw that I could not remove using a cheap tool.
View detail
It is a useful tool when one is in a tool box. Quality is also a problem pear if it is KTC!!
It is a useful tool when one is in a tool box.
Quality is also a problem pear if it is KTC!!
View detail
I've been using it for years.
The handle is large, so it is not suitable for light turning.
The precision is outstanding, and I guess KTC is made in Japan.
The part to turn with force is also secure, and it is hard to use other cheap tools.
View detail
Minus to match Plus.
Since I already had a Phillips screwdriver, I wanted a slotted screwdriver as well.
Like Plus, the handle is large, so it is not suitable for light turning, but in the case of Minus, it is used when applying a lot of force, so it is not MinusPoint.
View detail
Easy to use
The long length allows you to aim and shoot in tight places where you cannot reach to loosen the Screw.
The tip of the Driver is conveniently aimed without dropping the Screw due to the Magnet effect.
View detail
Easy to use
[How is it used?
The size of the Fixing Screw of the Generator Cover is Large, so I purchased the No.3 number because the normal Phillips Screwdriver was almost tarnished.
Was the one you received as per Image?
As shown in the picture, it was bigger than I expected, but it was just right for my use.
How was your experience with it?
As described as a firm Fit to Mt. Screw, it was Firmly engaged and did not feel like it was going to lick at all.
I thought it was comfortable to hold and very easy to turn.
The hexagonal shaft makes it easy to apply Torque, and it is also used as a penetrating driver, so it is likely to be used more often in the future for maintenance of old cars.
[Points to note]
It is difficult to get a sense of size, but for the 1st pc Penetrating Driver, No.1 or No.2 is good.
I chose No.3 because the Screw mountain I use is a bit deep and wide.
How did it compare to other products?
I only had a Phillips Screwdriver, which I didn't know well at Homsen, but it is incomparably better than that.
The ease of use, such as the feeling of fitting snugly to Screw Mountain and the ease of gripping, is good for the price.
【Review】
It was easy to use, as it is a highly rated Driver.
For light maintenance, an inexpensive one would be fine, but for those who do heavy maintenance, it would be worthwhile to have one pc.
View detail
For removal of Air cleanerBox.
It was a Plus screw on the Air cleanerBox, so I bought it to turn there.
The Grip is also shaped for easy grasping and use.
I thought it might be a little expensive compared to another Manufacturer, such as Home center.
We chose KTC because it is a reliable tool that can be used for several years.
Minus is also a Quantity:I thought it was a Set and bought it together.
View detail
Easy to apply force
I bought this to replace the Driver because it was getting tired.
As KTC claims, it has a shape that makes it easy to apply force.
The cross-section is almost square, so I don't think there is any driver that can compare to this product when turning the screw with LargeTorque applied anyway.
On the other hand, once the screw is loosened, when you turn it round and round, it requires a hang to remove it at high speed because it is low geared due to its rectangular shape.
I have a lot of opportunities to turn a stuck Screw, so I wanted a Driver that could hang a LargeTorque anyway, and I like it.
Since it is a Penetrating Driver, it can be used by tapping it with Hammer.
I once beat GunGun to the point of destroying Driver, but I can still use it today without any damage.
The precision of the tip is also well done as only KTCBrand can do, and as long as you choose the right size, you will hardly lick it.
Also, since it is magnetized, it is less likely that the loosened Screw will fall off.
Because of its overall thickness and rigidity, it is difficult to access narrow gaps, but I use different drivers for the right places.
View detail
Compact
I was looking for a compact and small one to use in a small space, and this one looked good, so I bought it.
The size is a little larger than I expected, but the turning part is nice and usable.
View detail
For removal of Jet
[How is it used?
I used it to remove a Jet that had almost seized on the carburetor.
I didn't have the right size in my hand, so I chose this product with a flat tip on a thin shaft.
Was the one you received as per Image?
I chose the size 190mm in length which seems to be easy to use.
It might have been a bit long to use it on the carburetor, but I didn't have any problems with it.
How was your experience with it?
I was able to safely remove the Jet of the carburetor which I could not turn with the Precision Driver which I had.
It was easy to use, especially since Jet didn't lick it.
The Elastomer grip makes it easy to grip without slipping.
How did it compare to other products?
There are several drivers for the carburetor Jet, but I chose this product because it is quite expensive and has a mixed reputation.
I didn't actually use that one, but I didn't have a problem using it enough with this product.
【Review】
The feeling of use, accuracy, etc. were good because it was made by KTC.
Since the price is inexpensive, it was enough for me personally even if it was not the Driver for Jet.
Dasa, the unique YellowGreen color makes it easy to find instantly in your toolbox. (Lol)
View detail
Slotted screwdriver。
The tip is sharpened and used as a tapping tool. View detail
It depends on the location.
The size is delicate, so the place where it is used is limited. View detail
Subtle Size.
It's not the easiest Size to use, but it depends on where you are. View detail
Heavy-duty Slotted screwdriver
Purchased to loosen a hard Minus head Bolt.
Tip Tough
Grip section Tough
Grip is rugged and slippery.
The Bolt head is firmly in place because of the
The hard Bolt loosened immediately.
View detail
It's huge.
I bought it because I thought it would be useful.
Although we don't actually have many scenes to use
It can be used as a hole drilling tool by attaching a hundred-yen drill blade.
Because the body is large and the grip is thick, it can be opened straight with force.
It's not the original use, but it's useful depending on how you use it.
View detail