Reviews
Fits: Others Shock driverQuantity:Set
If you don't have to use it, good for you.
It's only here and there, but use it before it goes unBrown.
If there was a hand guard on the grip, it would protect the hand from losing the strike.
Reduction in cost, I guess.
It is an insurance tool, but it is more economical than no-brown, time loss and hard work.
View detail
Trusted KTC
[How is it used?
Purchased a new Driver because I lost the one I had been using.
I bought this product because I thought, "If I'm going to buy something, I'm going to buy KTC!
Was the one you received as per Image?
It was as per Image as it was a product I had originally seen.
How was your experience with it?
It is easy to grip and use, and I felt that it is a Driver that I will be able to use for a long time to come. The construction is solid, so I think it is a large difference from cheap drivers.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
It's inexpensive, so it's a good idea to have it as an insurance policy.
I ended up relying on Extractor, so I couldn't use it on the rusty, soggy Screw.
However, it would be good to take it as a preliminary bad idea before drilling holes with Drill.
It is possible to buy it as insurance because of its low price.
View detail
We can't expect too much.
I was attracted by the phrase, "You can turn a tapped screw! I was attracted to this product by the phrase, "You can turn a screw that has been tampered with!
However, in the end, it depends on the strength and condition of the Screw side, so it is not able to stand up to a soggy Screw.
It's a pain to use Extractor out of the blue, but it's good to have it as an insurance policy for positions and types of Screws where Neji-saurus-like things are not available.
View detail
fantastic little screwdriver really really good on a japan motorbike
I never knew about this brand or JIS screwdrivers until I got one as a gift..Really bites into screw great when i showed it to my friend who is a long time mechanic he pulled out his favourite screwdriver from a massive collection of various brands. His was a T bar vessel.very very good for stuck screws one of the best Now I buy them for my friends who own Japanese cars and motorcycles. Phillips screws are American. JIS screws are Japanese and are designed differently. You need a JIS screwdriver if you own a Japanese product. Plus it’s an impact driver! Weirdly, I've only used the actual impaxt feature once. It was useful then. But usually it's just the shape of the head itself that's the miraculous thing about this screwdriver. I've bought some more (small) Megadora screwdrivers too, and they're nice as well, but it's this one that seems just leaps and bounds better than other screwdrivers.Thank you also for the fast shipping and nice packaging. View detail
1 pc to save as many Screws as possible.
[How is it used?
When I was working on my motorcycle at home, there were some bolts that could not be removed by the driver, and I had to destroy the screws.
I could have chosen any manufacturer's product, but I chose DAYTONA, which handles a lot of motorcycle products.
Was the one you received as per Image?
It was just like the picture.
Slightly Large? Standard size.
How was your experience with it?
There are some places where it exits as I thought it would when I used it and some places where it does not.
The object must be restrained so that the force does not escape, and it does not seem to be suitable for sideways Screwetc. on a car body, for example.
I was able to remove the screws in areas where the force did not escape, so I will try again by placing them against a wall or something in areas where I could not remove them this time.
[Points to note]
Quantity the object so that the force does not escape as described above.:Set is required.
How did it compare to other products?
I wonder if it is an OEM or the same factory that produces it, since it is identical to the Shock driver of A0tro PROducts. I wonder if it is OEM or the same production factory.
【Review】
Shock drivers are available from various manufacturers, but I think they are relatively inexpensive and of good quality.
There are many types of Bits, so it can be used for Screws in various places.
View detail
Compact
Compact and useful for use in tight spaces.
It is small and cannot apply much force, but it is easy to use when tightening a little and replacing the tip.
I like that the price is not that high.
View detail
I thought I wouldn't have to do without it, but I finally got my hands on it.
[How is it used?
ESTRELLA's filler cap is a type with a minus cutout similar to the Timing Hole Plug, but it is usually opened with a slotted screwdriver with a large slot, so I have not touched the coin driver. I have not touched the coin driver.
One day, I tried to open the filler cap with a slotted screwdriver to put in oil, but I got stuck... I didn't want to do it, but it was an emergency and I tried to open it with a coin, but the coin lost out.
I finally reached out to Coin Driver because I knew I could not turn my back on them.
Was the one you received as per Image?
Although the shape itself was the same as the product image, the actual product seemed smaller (compact) than I had expected.
This was not a problem, as the compact design is more convenient to keep in a tool box.
How was your experience with it?
It was the first time for me to use the Coin driver, and I was a little worried if it would fit because there was no description of size and so on, but I was able to use it on ESTRELLA and Filler cap without any problem. I was able to open it safely.
[Points to note]
Even though it is a Coin driver, I think it is indeed useless if the Size is not right.
It is a good idea to check the Size of the part to be used before purchasing.
How did it compare to other products?
It definitely works better than Coin.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Very capable with the combined Machine.
To enhance the on-board tools.
I usually keep my on-board tools in PassportCase in my Pannier,
The Driver was too long and was sticking out of the Case,
Consider something short but with a decent amount of force.
1/4 in rear section (6.3mm) The key is that it is equipped with a socket for
Grip is also square, non-slip and good.
Conversely, it is not suitable for sliding and turning round and round.
It is an on-board tool and for emergency use, so it does not turn a lot of Bolt,
With the additional T-Bar, I can go round and round,
The square pattern prevents it from rolling around and going anywhere.
That is a difference in concept of use, so this is a good thing.
View detail
Driver shape for easy turning
Because of the shape of the driver, Torque cannot be applied, but it can be quickly removed by holding the shaft and turning it.
I had the opportunity to use it at work and found it very easy to use and purchased it as a tool for Motorcycle maintenance.
View detail
In addition to removing the interior lining
I bought it to remove the interior lining of my car, but I thought it could also be used to remove and install the Fuel Hose, so I tried it and it was very easy to remove.
The width is 10mm, so only the tip can be inserted, but the Fuel Hose is also new, and it is easier to take out the Large because I used to have a hard time taking it out.
Of course, it can be used to remove the interior lining without any problem.
I am satisfied with the low price.
View detail
Stylish wooden handle
I was looking for a Penetrating Driver and bought it because of its low price and stylish wooden handle.
The ease of use and quality is perfect.
Plus only each size is purchased but Quantity:It looks like the Set purchase is a better deal.
View detail
Purchased for installation of Armor Handguard.
Purchased to install Armor Handguard, needed to remove Bar End. I think two people are needed to do the work. View detail
It's safe to use
I always use Sk11 tools. This product is also well made and easy to use! View detail
Taken!
It worked well for the Gold amount. View detail
Small and comfortable to hold
The Size is easy to grip.
It is also easy to apply force there.
View detail
Rather than turning Screw.
Purchased because I wanted a Minus in Small size.
Minus of such a size is often used for doing things by sticking it into a gap rather than as a driver when servicing.
View detail
Used in Z1
I purchased this product to remove the M6 Screw from the Generator-Cover and Transmission cover on my Z1. I bought this product because I have an old motorcycle and the screws are stuck and easily licked, I was not sure if I should buy a shock driver because of its high price, but this product is very inexpensive and I bought it on the spur of the moment. I think it is a good driver because it can be used as a normal driver. View detail
For Socket
The Driver for the Socket wrench for in-vehicle tools broke, so I bought this to use as a replacement.
The grip and ease of turning are fine, but it is a little larger than I had imagined. I wanted something a little more compact, but it looks sturdy, so I thought this would be fine for use.
View detail
Special Tool in a sense
I had a slightly smaller long driver in the carburetor setting, so I used that, but it was not good enough.
(15cm for No.1Driver, 30cm for No.2Driver)
ThrowAdjust Screw (PilotAdjust Screw) I was looking for a slotted screwdriver for the head of the No.1 driver and one that is at least 20 cm long.
Then I found this product and bought it, thinking it would probably be Large sturdy since it is 25cm long.
Since we are using PWK for APE, all Adjust Screws are on the Left Side and OEMEngine Layout, but the carburetor is installed diagonally Right, so unfortunately it is shadowed by the Frame, I thought it would be better to change the way of thinking and look for a tool that can be used for a long and thin time.
Surprisingly, it was easy to use and set up, and I'm glad I was able to save more time than before.
View detail