Reviews
Fits: Others Shock driverQuantity:Set
If you don't have to use it, good for you.
It's only here and there, but use it before it goes unBrown.
If there was a hand guard on the grip, it would protect the hand from losing the strike.
Reduction in cost, I guess.
It is an insurance tool, but it is more economical than no-brown, time loss and hard work.
View detail
Trusted KTC
[How is it used?
Purchased a new Driver because I lost the one I had been using.
I bought this product because I thought, "If I'm going to buy something, I'm going to buy KTC!
Was the one you received as per Image?
It was as per Image as it was a product I had originally seen.
How was your experience with it?
It is easy to grip and use, and I felt that it is a Driver that I will be able to use for a long time to come. The construction is solid, so I think it is a large difference from cheap drivers.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
fantastic little screwdriver really really good on a japan motorbike
I never knew about this brand or JIS screwdrivers until I got one as a gift..Really bites into screw great when i showed it to my friend who is a long time mechanic he pulled out his favourite screwdriver from a massive collection of various brands. His was a T bar vessel.very very good for stuck screws one of the best Now I buy them for my friends who own Japanese cars and motorcycles. Phillips screws are American. JIS screws are Japanese and are designed differently. You need a JIS screwdriver if you own a Japanese product. Plus it’s an impact driver! Weirdly, I've only used the actual impaxt feature once. It was useful then. But usually it's just the shape of the head itself that's the miraculous thing about this screwdriver. I've bought some more (small) Megadora screwdrivers too, and they're nice as well, but it's this one that seems just leaps and bounds better than other screwdrivers.Thank you also for the fast shipping and nice packaging. View detail
Very capable with the combined Machine.
To enhance the on-board tools.
I usually keep my on-board tools in PassportCase in my Pannier,
The Driver was too long and was sticking out of the Case,
Consider something short but with a decent amount of force.
1/4 in rear section (6.3mm) The key is that it is equipped with a socket for
Grip is also square, non-slip and good.
Conversely, it is not suitable for sliding and turning round and round.
It is an on-board tool and for emergency use, so it does not turn a lot of Bolt,
With the additional T-Bar, I can go round and round,
The square pattern prevents it from rolling around and going anywhere.
That is a difference in concept of use, so this is a good thing.
View detail
Driver shape for easy turning
Because of the shape of the driver, Torque cannot be applied, but it can be quickly removed by holding the shaft and turning it.
I had the opportunity to use it at work and found it very easy to use and purchased it as a tool for Motorcycle maintenance.
View detail
In addition to removing the interior lining
I bought it to remove the interior lining of my car, but I thought it could also be used to remove and install the Fuel Hose, so I tried it and it was very easy to remove.
The width is 10mm, so only the tip can be inserted, but the Fuel Hose is also new, and it is easier to take out the Large because I used to have a hard time taking it out.
Of course, it can be used to remove the interior lining without any problem.
I am satisfied with the low price.
View detail
Stylish wooden handle
I was looking for a Penetrating Driver and bought it because of its low price and stylish wooden handle.
The ease of use and quality is perfect.
Plus only each size is purchased but Quantity:It looks like the Set purchase is a better deal.
View detail
Purchased for installation of Armor Handguard.
Purchased to install Armor Handguard, needed to remove Bar End. I think two people are needed to do the work. View detail
It's safe to use
I always use Sk11 tools. This product is also well made and easy to use! View detail
Taken!
It worked well for the Gold amount. View detail
Used in Z1
I purchased this product to remove the M6 Screw from the Generator-Cover and Transmission cover on my Z1. I bought this product because I have an old motorcycle and the screws are stuck and easily licked, I was not sure if I should buy a shock driver because of its high price, but this product is very inexpensive and I bought it on the spur of the moment. I think it is a good driver because it can be used as a normal driver. View detail
Special Tool in a sense
I had a slightly smaller long driver in the carburetor setting, so I used that, but it was not good enough.
(15cm for No.1Driver, 30cm for No.2Driver)
ThrowAdjust Screw (PilotAdjust Screw) I was looking for a slotted screwdriver for the head of the No.1 driver and one that is at least 20 cm long.
Then I found this product and bought it, thinking it would probably be Large sturdy since it is 25cm long.
Since we are using PWK for APE, all Adjust Screws are on the Left Side and OEMEngine Layout, but the carburetor is installed diagonally Right, so unfortunately it is shadowed by the Frame, I thought it would be better to change the way of thinking and look for a tool that can be used for a long and thin time.
Surprisingly, it was easy to use and set up, and I'm glad I was able to save more time than before.
View detail
DAYTONA Impact screwdriver
DAYTONA Impact Screwdriver This tool is indispensable for working on the engine. More than once I thought to do without it, and the result was a knocked down edge on the bolts and a replacement. Therefore, I ordered an impact screwdriver. I am very satisfied with the quality, everything is good. A separate plus is a metal case. This tool is essential for working on the engine. More than once I thought to do without it, and the result was a knocked down edge on the bolts and a replacement. Therefore and ordered an impact screwdriver. I am very satisfied with the quality, everything is good. A separate plus is the metal case. View detail
I should have bought Koch from the beginning (#2)
Common L-shaped Quantities:I had been using a set, but I happened to know at work that there was a Driver type Hexagonal Wrench, so I bought a 5mm one of the same series.
The L-shaped type cannot be used to work around electrical components with complicated wiring, which can cause licking of screws and damage to the wiring.
But with this driver type, all these problems were solved in one shot.
The Large size of the pattern is also different from 5mm and is thinner.
View detail
I should have bought this one from the beginning.
Common L-shaped Quantities:I had been using a set, but I happened to know at work that there was a Driver type Hexagonal Wrench, so I bought a 4mm one of the same series.
It is extremely easy to use and almost eliminates the risk of dropping tools and damaging the motorcycle.
View detail
Anyway, it fits in my hand!
They're comfortable in your hand, easy to turn! And cheap! I've been using GunGun heavily and it will probably last me a lifetime. View detail
Accuracy and strength!
Of course, as Precision Driver, the precision and strength of the tip is outstanding.
When I made Slit machining Spark plugs for Others, I also use Precision Driver for pushing and drilling holes to get BALI when I am about to Penetrating in Slit machining.
Really great tip strength!
View detail
Are non-Motorcycle uses more frequent?
So far "Large" When "Inside Although I had a Driver for the "Small" was purchased because he did not have one.
[How is it used?
Motorcycle in general, and all other products that use +Screw in general, but where and how often it can be used. "Inside The Driver is much less than the Driver in the "Mere Old Man". However, it is just fit to the +Screw that stops the back cover of the mobile training game that was popular more than 20 years ago.
Was the one you received as per Image?
The one I received looked as high quality as the picture and had a thin coating of rust-proof Oil on the tip.
How was your experience with it?
It seems to fit very well in the hand, and the grip is very firm, so it will be easy to put on and off the Screw.
However, since the grips are too tight, it is better to use a little more force when using it on a part that should not be tightened too much.
[Points to note]
Select and use the appropriate +Driver number for the appropriate +Screw.
How did it compare to other products?
until now "Inside I've been using only the +Driver of the "Small" This is the first time for me to use the type of Driver in the "1" series, but the accuracy, ease of use, and fit feel are good.
Also, my personal impression is that the Plus and Minus Screwdriver Sets are sold separately, but perhaps
I don't think I'll be able to use all of them, so as far as drivers are concerned, I only buy what I need from Single Item sellers.
I think it would be a good idea to do so.
View detail
This is the most universal driver with a large size.
It became the number one Driver that I often use for both Motorcycle and products that use +Screw, and I bought it because the Vessel +Driver that I had at home was worn out.
[How is it used?
It can be used for all Motorcycle and other products that use +Screw, and since it is the most frequently used number driver, it can be used in a wide range of locations.
Was the one you received as per Image?
The one I received looked as high quality as the picture and had a thin coating of rust-proof Oil on the tip.
How was your experience with it?
It seems to fit very well in the hand, and the grip is very firm, so it will be easy to put on and off the Screw.
However, since the grips are too tight, it is better to use a little more force when using it on a part that should not be tightened too much.
[Points to note]
Select and use the appropriate +Driver number for the appropriate +Screw.
How did it compare to other products?
Compared to the worn Vessel +Driver, the accuracy, ease of use, and fit are still improved.
Also, my personal impression is that the Plus and Minus Screwdriver Sets are sold separately, but perhaps
I don't think I'll be able to use all of them, so as far as drivers are concerned, I only buy what I need from Single Item sellers.
I think it would be a good idea to do so.
View detail
Compatible with Handlebar Weightetc. screws
Purchased because I had an inaccurate +Driver at home and had almost licked the Screw when servicing it.
[How is it used?
Screws with Handlebar Weight installed and screws of OEM Exhaust Cover of MONKEY50 are now supported.
Was the one you received as per Image?
The one I received looked as high quality as the picture and had a thin coating of rust-proof Oil on the tip.
How was your experience with it?
It seems to fit very well in the hand, and the grip is very firm, so it will be easy to put on and off the Screw.
However, since the grips are too tight, it is better to use a little more force when using it on a part that should not be tightened too much.
[Points to note]
Be careful not to over-tighten when using this product in areas where tightening Torque is not very high.
How did it compare to other products?
Compared to T-drivers made by other manufacturers, the accuracy, ease of use, and fit are far superior.
Also, my personal impression is that the Plus and Minus Screwdriver Sets are sold separately, but perhaps
I don't think I'll be able to use all of them, so as far as drivers are concerned, I only buy what I need from Single Item sellers.
I think it would be a good idea to do so.
View detail