Reviews
For cutting Throttle Wire
[How is it used?
The Accelerator Wire had been deformed by a vehicle left unattended for a long time, so I purchased this wire for cutting when replacing the Inner wire.
I chose it because it was inexpensive and seemed to cut Wire of a reasonable thickness.
Was the one you received as per Image?
It is smaller and less bulky than expected, so it seems to take up less space when stored.
It is also equipped with a stopper, so there is no need to worry about it opening on its own.
How was your experience with it?
I cut the Motorcycle Accelerator Wire and it cut in an instant with very little effort.
When I used to cut Wire, I had to work very hard with Nipper or something like that, so the process became easier.
As advertised, the cutting surface is clean and good.
[Points to note]
Lines above the cutting capacity are (Size sensitively) I don't think it will cut it.
It seems to be used only for cutting fine lines.
How did it compare to other products?
Naturally, it is definitely better than the hand-held Small Saisai Nipper.
The dedicated tools are good, although they will probably be used only a few times a year, if at all.
【Review】
Wire can be cut quickly with little force.
However, it is a tool that is not used for normal motorcycle riding.
I only use it when I really need to replace inner wire on an old car.
View detail
It's good stuff for the money.
It is Nipper of the famous KNIPEX of the pinching thing.
It is not a Type that is cut with the face spur that is in the electrician's tool, but a normal (?) Nipper.
”If you want a good Nipper”, you can go with KTC without thinking twice, but if you work a little harder and go with something around KNIPEX, you'll be more satisfied.
It is a sharpness that even feels exhilarating.
”There is a Nipper in the world that can be cut with a snap, but this is a Type that can be cut with a snap.
You might want to be careful about cutting towards the Garbage box, because it's too sharp and the edges will fly off every time.
I've been using it for about 3 years, although it is a Sun Machine Level, and so far I haven't seen any decrease in sharpness.
In addition, the sense of accuracy is wonderful, and there is no rattle in the joint part.
The Grip is cast resin, so it's gentle on the hand, and it doesn't seem like the resin will come loose again.
In general, the texture and ease of use are good enough to recommend it if you want a ”good Nipper”.
View detail
Light and strong
The Grip is easy to grip and cuts well with light force, the Body is light and very strong, and the hardness of the blade makes it easy to cut even hard objects. The body is light and strong, and the high hardness of the blade makes it easy to cut hard objects. This high-precision nipper is useful for installing electrical components. View detail
Satisfied with the sharpness
The rubber grip is easy to hold, so you can grip it firmly and the power is easily transmitted, so the sharpness is very good. The sharpness is completely different from a cheap Nipper and the workability is good. I am satisfied with the high performance for the high price. View detail
Satisfied with the sharpness
The grip is easy to hold and the cutting power is good even with a light grip and I am very satisfied with the sharpness. The blade is also highly accurate and sturdy, so it seems to be durable and there is no need to worry about chipping the blade. It is so easy to use that it cannot be compared to a cheap Nipper. View detail
Regular Nipper
Although it is not suitable for fine work
It is necessary and sufficient for the work of cutting and peeling.
Even if you cut a somewhat hard thing, there is durability that the blade does not spill.
View detail
The sharpness is beyond the price.
The grip is easy to grip and you can put a lot of pressure on it, so it's easy to cut hard objects and the sharpness is very good. The price is very reasonable and the performance is more than enough for the price. View detail
It is a sharpness without Stress.
The Grip is easy to hold, easy to cut any object with light force and very sharp. The blade is very strong and durable, and I can use it for a long time. The price is a little high, but it is a satisfactory use. View detail
It is very sharp.
Compared to the cheap Nipper, this is a completely different thing. It's light and easy to use, so it's not a burden on your hand. It can be used for navigation and ETC (Electronic Toll Collection) applications in the car. View detail
That was a good Nipper.
It's a Bar code Nipper, so of course it was a good tool. The past tense of this Nipper is that I was inadvertently twisting it and chipped the tip. Of course, the Nipper is a cutting tool, not a twisting tool. It's not the tool's fault because the user was not good at using it. If you want to use it in a bad way, you should get a Daiso Nipper. View detail
Cospa is good
I used Nipper that is 100 yen uniform before but the quality is still better.
Easy to use, I thought that the weight feeling when I had it could not be done with 100 yen.
It is not so high and is generally good.
View detail
Purchase for Tie Wrap
Purchased because the sharpness of Nipper on hand is getting worse.
The commodity itself was Size to fit in the palm and the cutting edge was thin, so I was concerned about the sharpness, but when you actually cut it you can cut off the pass.
As Main is for Tie Wrap, the blade will never be damaged soon..
Since the cutting edge is thin and thin, Cut of Tie Wrap in the back is easy as well.
View detail
The grasped touch is very good. When especially cutting requires power, this Grip form and construction material have sense of security dramatically. It is good also in Design, and since it is easy to find a red Grip color also in a tool box, i
The grasped touch is very good.
When especially cutting requires power, this Grip form and construction material have sense of security dramatically.
It is good also in
Design, and since it is easy to find a red Grip color also in a tool box, it is found useful.
View detail
Although the Nipper has used KNIPEX regularly as one of the own account tools used from ancient times in an office, there is no turn of this MODEL in Motorcycle maintenance at a Garage. Although there may be turn when taking out the circuit board of Mete
Although the Nipper has used KNIPEX regularly as one of the own account tools used from ancient times in an office, there is no turn of this MODEL in Motorcycle maintenance at a Garage.
Although there may be turn when taking out the circuit board of Meter Assy and dealing with an electronic circuit board simple substance out of a Garage -- It is this Comfort-grip Type that was updated recently [
No. 1 ].
It is easy-to-use also to the place where the edge of a blade is thin and narrow, and a cutting plane is also smooth.
Since it is a product made from a STAINLESS STEEL, a good place can also maintain beauty to a life.
After all, since it is the consumable goods for work, considering the Balance of the engine performance, a life, and a price, this neighborhood is used, continuing all the time.
View detail