Reviews
Drumstickn, Drumstickn!
I often make my own parts for ZEPHYR400 and CUB90. I often use Aluminum plate as material.
For the cutout, we used different tools depending on the thickness:Gold scissors tend to bend the object while cutting, and an iron saw tends to blur the cutting line. It took a lot of time and effort to make the final correction and polish it to make it less noticeable.
I had never seen SK-11's Hand nibbler tool in person, so I did not have an Image to use it. I had never seen a hand nibbler before, so I did not have an image of using it. I purchased it and found it easy to use, and I enjoyed cutting aluminum and steel plates. It is not like cutting with a normal scissors, but with a drumstick, a drumstick, a drumstick.
The blade is a sturdy Square Type with a thickness of approximately 6mm. The blade is clamped between the blade and the board, and the blade moves down and cuts off the board in one grip. The grip force varies depending on the material and thickness to be cut; even aluminum plates are quite tiring. It is easier to cut by gripping the blade or placing the lower side of the fixed grip against the flat surface of the worktable and pushing the working grip in with your arm strength.
I had a person with a weak grip use it; he could not cut a 1mm Aluminum board with one grip. I think it has something to do with the strength. I'm afraid that if I force myself to grip it too tight, I'll hurt my fingernails." I was told. I could use a leather hand, but it is dangerous and difficult to slip.
Because of the thickness of the blade, the cut will drop about 6mm worth of cuttings. In the case of an iron saw, it will be about 2mm worth of iron dust. It is better to use different tools considering the labor and the processing time after cutting.
The blade bite was good when new, but the blade is starting to round off a bit. It would be nice to replace or polish the blade, but since it is inexpensive, it may be a good idea to replace it.
If you want to make longer cuts, you can choose an electric saw. However, for small workpieces, SK-11's Hand nibbler is sufficient.
View detail
A quality product that is robust and well-liked by the public.
When creating a Brake hose, I had to cut the outer Wire in a batten, but the Nipper I had was not good enough, so I bought an extra one.
To begin with, this work requires cutting thin steel wire in batches at once, which is impossible with a half-hearted nipper.
The inferior products sold at Home center do not disconnect at all in the first place.
I was very happy with KNIPEX and Belzer's Nipper when I used them in the past, so this time I bought KNIPEX again, which cuts more to my liking.
Both cut well, but the feel of the cut is the exact opposite.
Snap! Belzer can be cut with a feel like a nail clipper, while KNIPEX can be cut with a "hang" feel! The KNIPEX has a "hang" feel to it.
Personally, I like the way KNIPEX cuts.
Both are powerful nippers that cut well, but if used in extreme continuous use, the sharpness deteriorates quickly after a certain point.
However, to my surprise, both of them regain their sharpness after an overnight rest.
I still don't know why resting it restores sharpness.
It is not a beautiful Plating surface finish, so only those who have used KNIPEX will know how good it is.
Black surface finish (is it a homo treatment or something?) is like Black dyeing, so the sense of luxury is Zero!
KNIPEX is good, although it is not flashy and not at all spectacular when it is in the tool box.
（If you like to have a sharp cut, I recommend the Belzer! If you like to cut with a "snap", I recommend Belzer, although Webike does not carry it! I wonder if the company still exists? (I haven't seen them at all, so they might be bankrupt already...)
View detail
For cutting Throttle Wire
[How is it used?
The Accelerator Wire had been deformed by a vehicle left unattended for a long time, so I purchased this wire for cutting when replacing the Inner wire.
I chose it because it was inexpensive and seemed to cut Wire of a reasonable thickness.
Was the one you received as per Image?
It is smaller and less bulky than expected, so it seems to take up less space when stored.
It is also equipped with a stopper, so there is no need to worry about it opening on its own.
How was your experience with it?
I cut the Motorcycle Accelerator Wire and it cut in an instant with very little effort.
When I used to cut Wire, I had to work very hard with Nipper or something like that, so the process became easier.
As advertised, the cutting surface is clean and good.
[Points to note]
Lines above the cutting capacity are (Size sensitively) I don't think it will cut it.
It seems to be used only for cutting fine lines.
How did it compare to other products?
Naturally, it is definitely better than the hand-held Small Saisai Nipper.
The dedicated tools are good, although they will probably be used only a few times a year, if at all.
【Review】
Wire can be cut quickly with little force.
However, it is a tool that is not used for normal motorcycle riding.
I only use it when I really need to replace inner wire on an old car.
View detail
Sturdy! Heavy! Good texture!
To be honest, it's pretty heavy, but it's sturdy and can knock out anything VANVAN! Even copper wire and discarded Tire Wire.
It's a recommendation because it can be cut! Grip part is also easy to hold and non-slip!
View detail
Even hard objects can be cut immediately!
Hard objects can be easily cut.
I use it to cut Balance weight of Wheel.
It cuts so good!
View detail
Incredibly powerful Nipper
You can tell when you hold it in your hand, but it is extremely rugged.
Even the thicker number line can be easily cut with Drumstick.
It is a quintessential KNIPEX product.
However, the blade tip is thick, so it is not suitable for fine work.
View detail
Large handle, easy to apply force, good material!
This is a Nipper with a Large handle for easy leverage, and the Vanadium steel makes it very sturdy! View detail
sharp (blade)
Easy-to-hold Grip and excellent sharpness allows cutting with light force.
It is made with great precision and care, so it is durable and can be used for a long time.
The price is a little high, but it is satisfactory.
View detail
cheap
The Grip is easy to grip for its low price, and allows you to put a lot of force into it.
The feel is not bad, and it is easy to cut even hard objects, and the sharpness is very good.
The performance is good enough for this price.
View detail
outstanding
The easy-to-hold grips allow for a firm grip, so cutting can be done even with light force.
The sharpness is excellent.
The blade alignment is highly accurate, and the material is sturdy and durable.
View detail
Easy to use
The Nipper has a good cutting edge and the Grip is easy to hold.
It is easy to work with because it cuts well and does not require much effort.
The price is a little high, but I think it is worth it.
View detail
easy to grasp
Grip is easy to grip and cuts well.
The blade is strong and durable, so it can be used for a long time. The blade is also strong, making it easy to cut even hard objects.
It is a convenient Nipper.
View detail
regular product
I always choose KNIPEX.
This Nipper can also cut Piano wire, so it can be used for anything.
The grip is firm and easy to grasp, and the surface is non-slip.
The sharpness is excellent, so it is pleasant to use.
I can recommend it
View detail
Nipper made by DAYTONA
[How is it used?
Used for Motorcycle maintenance. Used for cutting inHemp palmock and Wiring.
Was the one you received as per Image?
Because I did not look at the total length carefully, it seemed much larger than the Image image.
How was your experience with it?
Although it requires a little more force than the spring-loaded type, the extra-thick grips make cutting easy.
[Points to note]
Nothing in particular, but the product itself is quite large, so I find it difficult to push it into a small space.
How did it compare to other products?
I have only used cheap 100-yen ones, so I can't give you a reference, but compared to those, I think the ease of use and accuracy (cutting power) are both of a high standard. I think it is better to buy a good one, even if it is a little expensive, because it is not something you replace often.
Other items that would be helpful
Opinions and requests to Manufacturer
It would be even better if it were available in a smaller size.
View detail
It's good stuff for the money.
It is Nipper of the famous KNIPEX of the pinching thing.
It is not a Type that is cut with the face spur that is in the electrician's tool, but a normal (?) Nipper.
”If you want a good Nipper”, you can go with KTC without thinking twice, but if you work a little harder and go with something around KNIPEX, you'll be more satisfied.
It is a sharpness that even feels exhilarating.
”There is a Nipper in the world that can be cut with a snap, but this is a Type that can be cut with a snap.
You might want to be careful about cutting towards the Garbage box, because it's too sharp and the edges will fly off every time.
I've been using it for about 3 years, although it is a Sun Machine Level, and so far I haven't seen any decrease in sharpness.
In addition, the sense of accuracy is wonderful, and there is no rattle in the joint part.
The Grip is cast resin, so it's gentle on the hand, and it doesn't seem like the resin will come loose again.
In general, the texture and ease of use are good enough to recommend it if you want a ”good Nipper”.
View detail
Light and strong
The Grip is easy to grip and cuts well with light force, the Body is light and very strong, and the hardness of the blade makes it easy to cut even hard objects. The body is light and strong, and the high hardness of the blade makes it easy to cut hard objects. This high-precision nipper is useful for installing electrical components. View detail
Satisfied with the sharpness
The rubber grip is easy to hold, so you can grip it firmly and the power is easily transmitted, so the sharpness is very good. The sharpness is completely different from a cheap Nipper and the workability is good. I am satisfied with the high performance for the high price. View detail
Satisfied with the sharpness
The grip is easy to hold and the cutting power is good even with a light grip and I am very satisfied with the sharpness. The blade is also highly accurate and sturdy, so it seems to be durable and there is no need to worry about chipping the blade. It is so easy to use that it cannot be compared to a cheap Nipper. View detail
Regular Nipper
Although it is not suitable for fine work
It is necessary and sufficient for the work of cutting and peeling.
Even if you cut a somewhat hard thing, there is durability that the blade does not spill.
View detail
The sharpness is beyond the price.
The grip is easy to grip and you can put a lot of pressure on it, so it's easy to cut hard objects and the sharpness is very good. The price is very reasonable and the performance is more than enough for the price. View detail