Reviews
Too Large to use for Scooter
[How is it used?
I bought this for Scooter Oilfor replacement.
When changing oil in the center stand of PCX125, it is difficult because there is no space to place a saucer.
Was the one you received as per Image?
I bought a Large size, but it was larger than I expected.
The texture was very good, and it looked like it would last a long time.
How was your experience with it?
With the Center Stand in place, I was able to change the oil, but the space under the Scooter and the size of the Oil Pan were too large, and it felt cramped and difficult to do so.
I am still glad I bought it, but I think I should have bought the One sizeSmallest one, because it is also very expensive.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Can also be used for Mirror shield
The Mirror shield of the MotorcycleHelmet can crack or deteriorate when cleaned with aggressive cleaners, but there is no such concern with this product. The Merit of the Largeest Merit is its portability, which allows it to be brought along on day-trips. Even in the summer, water will not fly out of the bag. "Dried out." I am glad that I can use it normally without any problems. View detail
Engine overhaul essentials
[How is it used?
I purchased this for Gasket removal and chamfering of mating surfaces during Engine O/H on a TZr50R.
Oil is the same DAYTONA's exclusive oil.
How was your experience with it?
Scraper alone could not remove all of the gasket that had been stuck for many years, so I used oil stone to clean the gasket thoroughly. I soaked it in 4st Oil at first to soak it up because it absorbs Oil quickly at the beginning of use.
After that, special Oil is applied and polished at the time of use as shown in the video.
How did it compare to other products?
I don't know about otherManufacturers, but I was worried about purchasing the number 600.
However, since Gasket removal was going to be the main focus, I bought the 400.
There was no problem here.
[Points to note]
If you continue polishing, you will run out of Oil and the sound will change, so you will need to add Oil immediately.
Be careful not to damage the object when polishing with a piece of Oil.
View detail
Purchased for Rust removal, surface correction and chamfering.
[Usage]
Bore Up Kit BALI removal, used for rust removal, surface correction, and chamfering, Oil is Daytona Oil stoneOil.
[Feeling of use]
The size is just right to fit in your hand, but be careful not to apply too much pressure or you will shave too much. Use #400 for finishing.
When I first started using it, it sucked in Oil immediately, so I had to put Oil on it thoroughly before using it.
(Points to note)
Recommendation is to put it in a Vinyl bag etc. when storing it. If you put it on paper or cloth, it will be stained by the oil that comes out.
View detail
Purchased for chamfering
[Usage]
Used for Bore Up Kit BALI removal and exhaust surface chamfering, using DAYTONAOil stoneOil.
[Feeling of use]
Good size, fits in my hand, easy to use.
When I first started using it, it sucked in Oil immediately, so I had to put Oil on it thoroughly before using it.
(Points to note)
The Oil that is sucked in comes out gradually.
Recommendation is to put it in a Vinyl bag etc. when storing it. If you put it on paper or cloth, it will be stained by the oil that comes out.
View detail
Still easy to use
I was thinking of having my wife make me a Quantity:Pair (for Left and Right) I needed two, so I bought the dedicated product quickly.
After all, it is easy to use because it is a dedicated product.
But maybe a little expensive.
View detail
One-Way Valve
I don't know about others, but I bought the One-Way Valve and Tube because of the price and the fact that I didn't seem to need to buy them separately.
We were given a video of the work beforehand, so we had no difficulty in checking the opening and closing of the valve and the oil level.
View detail
Brake fluid replacement
Used to replace brake fluid. Until now, it was a plastic bottle. View detail
Large doubles as Small
The oil drain of CB1000R is horizontal, so the oil flies in a parabolic line when it is discharged, but this drain pan 7.5L is large enough to cover the oil. DAYTONA also offers a 3.5L small size, which was also sufficient, but the large size was the right choice. I changed the oil twice during the break-in period of 1000km, but both times the oil was so blacked out that I thought there might be iron powder in it. I'm glad I broke it in. View detail
You can sit or kneel.
It is good that it can be used in two ways.
It has a good texture and will last for many years if handled with care.
I purchased Repeat for indoor use.
View detail
Quantity:I'd like to have it as a Set.
Straight and Curve tip for convenient use.
Grip is a little hard to hold, it would have been nice to have a thicker and firmer grip.
Apart from this, the Small Rame (Thin) It would be useful to have a Size of
View detail
Multi-purpose use
Size has two of 100? and 250?. After use, it is washed with Parts cleaner, but as shown in the photograph, when use is repeated, yellowish color is formed. This cannot be helped. View detail
just as I thought
It is exactly what I expected. It has a return handle that allows me to fill the container with oil without overflowing. The waste oil outlet also has a return to make it easy to dispose of the waste oil. View detail
For Engine overhaul.
[How is it used?
old car (SportsCUB) Used in Engine overhaul of
How was your experience with it?
This Size is surprisingly not sold at Home center.
It is useful for facing the mating surface of the Engine Case after the Gasket has been removed.
I used DAYTONA's Oil Stone special oil, but any kind of cutting oil seems to be good.
View detail
Vertical Brush for tapping
As the title suggests, Brush is used by tapping vertically.
It does not slide sideways like the Tooth Brush, so it is useful for washing the corners of parts that are deep inside the machine.
Brush is not soft bristles, but rather a line of very thick nylon bristles with a diameter of 1mm or more.
Therefore, if you use it on painted surfaces, you will get Wound all over the place, so be careful if you are nervous!
For example, if you try to use it to clean the joint between the Rim and Spoke of the Wheel, which is folded at 90-degrees and cannot be cleaned well with a normal Brush, it is a great Brush shape, but the Wheel's paint will be covered with Wound.
To begin with, this Brush is used to wash Gold attribute Parts such as Engine.
The original brush was used by Mechanic to wash engine parts on the wash stand, and it is a brush to wash off the very dirty and blackened Gold parts with engine oil while pouring washing oil. Please do not make this mistake.
Conversely, if you want to wash dirty gold, use Number One, and even in areas that are deep and difficult to polish, you can clean and wash away the dirt by hitting it with Brush as if you were stabbing it.
While ordinary Brush (e.g., Tooth Brush) is easier to clean on flat areas that are easily accessible and visible, this Brush has a monopoly on areas where the Tooth Brush does not hit well.
Vertical TypeBrush is also available from otherManufacturers, but DAYTONA's Brush may be characterized by the shorter length of the side bristles.
For my own use only for vertical tapping, I prefer the bristles to be aligned all the way to the tip, but for general use with horizontal slides to clean the surrounding area together, the shorter bristles on the sides may be useful.
It is good that the hair does not fall out easily, unlike very cheap inferior products.
The material of the bristles is Nylon, so it cannot be used with solvents such as Thinneret (it will melt). (It will melt).
View detail
I use it a lot.
It is used quite often when disassembling the engine, using the Gasket Case, or removing covers. We recommend the purchase of polishing oil at the same time. (I went to Homsen to buy mine.) View detail
To finish the Clutch cover
It did the job well for the price, and the CHALYCHALY feel was pleasant to the touch. If I had to say something, I think it would be very nice if there was some kind of shape within the rectangle so that it could be used for both detailed and wide areas, like a convex or L-shape. The seal remnants around the cover were removed after the Scraper was used, but I was able to remove them. View detail
I should have used it earlier!
With a double disk motorcycle, the opening and closing of the Front Left Side Valve is large, but with this, it is easy because it only opens and closes the Brake. View detail
Quantity:2pc. Set eye
Last time, I bought 1pc. for trial, not bad to use, but not good for the selling price and the texture with the fabric.
However, the Quantity:2pc. It is more convenient to have a Set, so I bought more because the selling price was lower.
Would I have bought more if it had been at the normal selling price?
View detail
Brake fluid replacement with no problems!
For my first Brake fluid exchange, I prepared three items
Active Active:14600038Air Vent Pump with Tube
DAYTONA DAYTONA:61825Brakes Air Venting Set
(3) Brake fluid
I had no problems with the workflow after having studied it on youtube and in the service manual!
View detail