Reviews
Where Solder is connected, etc.
It can be used for branching connection with a solder, protection of Cable, etc.
It would be better to shrink them with a heat gun, but they are shrinked by lightly frying them with a lighter.
Be careful not to put the flame too close to it or it will melt.
View detail
put together in a presentable manner
Recent Small blinker wiring is ultrafine
It's as if it would tear into a thousand pieces if you applied a little too much force.
If you attach it as it is, it will surely break off.
And it looks bad Parenthesis.
So I reinforced it through Tube.
Finished by decorating with an Amigumi Sleeve
Just this much will make it look so much better.
It's definitely better than the BlinkerWiring roundup.
View detail
Purchased for the Wiring branch that does not take up Space!
I bought it for the Wiring branch!
It is convenient for Wiring branching that does not require soldering and does not take up space!
View detail
For homebrew
DAYTONA sells Headlight RelayHarness, though,
I wanted to make a Bullet Terminal for Wiring and Honda in OEM colors and a Layout to fit Relay in the Tool Case.
I made my own Harness utilizing this for RepairRelay.
It is well made and Switching works fine.
I gave it three stars because it may not come into play during the optical axis light intensity test for vehicle inspections, and I am not sure of its durability.
View detail
Good quality but...
The parts are good quality ones, but the import tax doubles the price. In my case : about 31€ for the parts + 31 € for the tax. To consider before buying. View detail
DAYTONAIncluded Parts:Connector required as
I have Repeat several times, but the Bracket is soft and difficult to connect firmly even with Crimp.
However, when using DAYTONA-related equipment, including Charger, it has become an indispensable Connector.
View detail
For power supply routing
Used for connection to USB power supply, 12V/5A current (60W) No particular problem since it can be used up to
The insulation coating is also thin, making it a perfect match for Bullet Type Terminals.
Color-coded Black/Red is also a good choice.
View detail
Exactly to Wiring Protection
[How is it used?
When I installed YOSHIMURAOil Temperature Meter on XJR400R, I needed to run the wiring from the back of the engine to the drain bolt to connect to the sensor, but I bought this product to protect the wiring because it is close to the drive unit. I purchased this product to protect the wiring because of its proximity to the drive unit.
How was your experience with it?
The coziness is like a normal Spiral Tube.
It was thicker than I expected, but within the acceptable range. 2m long, so there is quite a bit left over, but it is necessary when customizing electrical systems, so it is good to have it.
How did it compare to other products?
The Spiral Tube was originally included with the Oil Temperature Meter, but it was a bit thicker than the Spiral Tube.
It would be nice to see a little more Size development.
View detail
KIJIMA Position unit
KIJIMA's Position Unit was installed to convert Gixxer 250's Blinker into a position that always lights up. View detail
Cospa best
After wearing Wiring as a solder, the process is easy and Beauty. View detail
Expected heat resistance
The power supply wiring needs to be passed through the side of the engine, and to protect the wiring from heat, this product was placed over the 5ΦColgate Tube because it has higher heat resistance than the ordinary Colgate Tube. When you put the wiring through the Colgate Tube, you can easily put the wiring through the Colgate Tube by squeezing the Tube as described in the Instruction Manual.
The Tube is elastic and fits perfectly to the thickness of the Wiring you pass through, so it looks neat.
After cutting the Tube, it will fray, but this will not be a problem if you fry it with a lighter when you cut it.
I gave it a 4 because of the somewhat high price.
View detail
Easy to use
I have never bought a double cord before, but this time I bought it to install a DriveRecorder in my car. 6 meters were left over and I was going to keep them for motorcycle use, but I had to install them in two cars in a hurry, so I ended up using all of them.
0.75 is the thickness of the wiring cord I often use, and the same 0.75 single is used for playing with the electrical components of my motorcycle. I have never had any durability problems with Emon's Wiring Cords, and I feel that I can use them with confidence. I am going to redo the wiring of my Motorcycle DriveRecorder, etc., so I am thinking of using a double cord to make it reflect. I will buy and use this Wiring Cord again.
View detail
It is used for DIY of the stationary portion of the single seat cover of Ninja250R. Although the thing of plating of the company was used, since it had been divided in vibration, the tougher stainless was chosen. Reinforcement, distortion-proof, a
It is used for DIY of the stationary portion of the single seat cover of Ninja250R.
Although the thing of plating of the company was used, since it had been divided in vibration, the tougher stainless was chosen.
Reinforcement, distortion-proof, and rust-proof are the honor students unique to a stainless, and are high. [ of cost performance ]
Since the hole is made, as soon as it processes it with a bolt, it can treat freely.
While it is hard, what processing is hard to carry out is unavoidable.
View detail
No problem
08 KawasakiZrX400 and KOSO (KN Planning) Used in combination with Sequential Blinker in
Worked fine.
However, the product description does not recommend the use of other manufacturer's blinkers, so the feeling of self-responsibility is Large.
Installation is easy and should be no problem for those who can install external blinkers, USB power supply, etc. by themselves.
BodyUnit is sober and Large
In the case of ZrX, it can be hidden inside the Bikini cowl, but for Motorcycle without cowl, you may need to make some modifications to store it discreetly.
View detail
Asphalt Coat Room。
Recommended for motorcycles with a RAT atmosphere. View detail
Favorite.
I've decided to go with this Wiring Cover. View detail
Best
This Wiring Cover has a vintage look. View detail
Repeat products.
My favorite Wiring Cover, highly recommended. View detail
It's sticky, but...
I love it because it provides good protection for my Wiring. View detail
For Wiring Protection.
I like the texture, but it's floppy, so I guess it's not to everyone's taste. View detail