Reviews
Where Solder is connected, etc.
It can be used for branching connection with a solder, protection of Cable, etc.
It would be better to shrink them with a heat gun, but they are shrinked by lightly frying them with a lighter.
Be careful not to put the flame too close to it or it will melt.
View detail
put together in a presentable manner
Recent Small blinker wiring is ultrafine
It's as if it would tear into a thousand pieces if you applied a little too much force.
If you attach it as it is, it will surely break off.
And it looks bad Parenthesis.
So I reinforced it through Tube.
Finished by decorating with an Amigumi Sleeve
Just this much will make it look so much better.
It's definitely better than the BlinkerWiring roundup.
View detail
Trust.
It claims to be weather resistant, so trust it anyway.
I have always been an Emon believer.
… I don't think it's any different than the others, … (laughs)
2sq for Grounding Wire.
View detail
About the same thickness as Car's Audio systemWiring
0.5sq, as the Title suggests, is ideal when thicker Wiring is not required!
I'm surprised (and grateful) that Webike also handles it.
View detail
Bigli handled by Web!ke
0.The thickness is 5sq, which is often used for car audio system decks and the like. View detail
Essential for DIY of electrical components
It's a must for DIY electrical components.
RedBlackDouble is easier to compile during Wiring!
These are the parts you want to keep in your toolbox along with Bullet Terminal and Electric Works Pliers.
View detail
For power supply routing
Used for connection to USB power supply, 12V/5A current (60W) No particular problem since it can be used up to
The insulation coating is also thin, making it a perfect match for Bullet Type Terminals.
Color-coded Black/Red is also a good choice.
View detail
usual
I think it is a standard Wiring.
I can't compare whether it is good or bad, as I have only used this one, but I am fully satisfied with it.
I will continue to use it if I need anything in the future.
View detail
Cospa best
After wearing Wiring as a solder, the process is easy and Beauty. View detail
It's good.
I bought it because I just needed a code. It is Emon, a trustworthy company. View detail
Expected heat resistance
The power supply wiring needs to be passed through the side of the engine, and to protect the wiring from heat, this product was placed over the 5ΦColgate Tube because it has higher heat resistance than the ordinary Colgate Tube. When you put the wiring through the Colgate Tube, you can easily put the wiring through the Colgate Tube by squeezing the Tube as described in the Instruction Manual.
The Tube is elastic and fits perfectly to the thickness of the Wiring you pass through, so it looks neat.
After cutting the Tube, it will fray, but this will not be a problem if you fry it with a lighter when you cut it.
I gave it a 4 because of the somewhat high price.
View detail
Easy to use
I have never bought a double cord before, but this time I bought it to install a DriveRecorder in my car. 6 meters were left over and I was going to keep them for motorcycle use, but I had to install them in two cars in a hurry, so I ended up using all of them.
0.75 is the thickness of the wiring cord I often use, and the same 0.75 single is used for playing with the electrical components of my motorcycle. I have never had any durability problems with Emon's Wiring Cords, and I feel that I can use them with confidence. I am going to redo the wiring of my Motorcycle DriveRecorder, etc., so I am thinking of using a double cord to make it reflect. I will buy and use this Wiring Cord again.
View detail
It is used for DIY of the stationary portion of the single seat cover of Ninja250R. Although the thing of plating of the company was used, since it had been divided in vibration, the tougher stainless was chosen. Reinforcement, distortion-proof, a
It is used for DIY of the stationary portion of the single seat cover of Ninja250R.
Although the thing of plating of the company was used, since it had been divided in vibration, the tougher stainless was chosen.
Reinforcement, distortion-proof, and rust-proof are the honor students unique to a stainless, and are high. [ of cost performance ]
Since the hole is made, as soon as it processes it with a bolt, it can treat freely.
While it is hard, what processing is hard to carry out is unavoidable.
View detail
Convenient
I used it in the Wiring retainer to avoid Short when processing Wiring.
Installation is easy as it shrinks when heated in the Dryer.
It will look good and finish as if a PRO had done the work.
View detail
It's going to look good.
Wiring can be put together in a SMART way.
It will look better.
The elasticity allows for excellent ventilation and protection of the wiring, preventing wiring shorts and other troublemakers.
Parenthesis kills two birds with one stone by not only looking good, but also by preventing damage to the wiring.
View detail
Easy to use
It is a strong and solid product that can be used in a wide variety of ways.
Stainless Steel, so it is Rust-free even when used in wet areas.
View detail
Easy to use
I bought this for use with ETC and electrical installation.
If you buy one, you can use it for a while because of its length.
There are several different thicknesses available, so it is recommended to buy several different types for different uses.
View detail
It comes in handy.
I bought this for use with ETC and electrical installation.
If you buy one, you can use it for a while because of its length.
There are several different thicknesses available, so it is recommended to buy several different types for different uses.
View detail
Easy to use
I bought this to clean up the Solder section of Wiring.
It is easy because it shrinks when heated with a heat gun.
After that, it hardens slightly and protects WellWiring.
The contents are just right, and at this quantity, I won't have to buy any more for a while.
It is not expensive, so recommendation is to buy several kinds by thickness.
View detail
It is good
I bought this to clean up the Solder section of Wiring.
It is easy because it shrinks when heated with a heat gun.
After that, it hardens slightly and protects WellWiring.
The contents are just right, and at this quantity, I won't have to buy any more for a while.
It is not expensive, so recommendation is to buy several kinds by thickness.
View detail