Reviews
Tools used only occasionally are SK11
I use basic KTC and Tone for tools.
I use SK11 for tools that are used only occasionally.
Insert angle of this Deep socket:6.35mm (1/4Inch) Purchase
Sprocket Coveretc.It is necessary to remove the bolt that is deep in the bolt, and it is necessary to remove the bolt that is deep in the bolt.
Frequently used insertion angle:9.5mm (3/8Inch) Deep socket in the
If you try to use the 8mm, the Ratchet Pouch opening will be
It's thicker, so it hits the Cover.
So, insertion angle:6.35mm (1/4Inch) will be needed
But I don't use KTCetc. so I don't want to buy KTCetc. for my Wallet...
Thank goodness for SK11's Socket
Reliable quality at a reasonable price
I use KTC and Tone where I hang Large Torque.
The parts of SmallTorque that are not used much are supplemented with SK11.
View detail
Swing Arm scale is for reference only
As the title says, the scale on the Swing Arm is for reference only.
I was looking at Motorcycle from behind and noticed that the teeth of Sprocket were somehow closer to the body side of Chain.
Quantity in the Swing Arm scale:Pair (for Left and Right) The position of Chain and Sprocket is not good, even though they are in the same position.
The Chain Alignment Tool was used to straighten the Chain, and the alignment between the Chain and the Sprocket was perfectly aligned, and as a byproduct, the Swing Arm scale was set to "Quantity:Pair (for Left and Right) We found that there was a Gap of about 2-3mm in the
If the alignment of the Chain is not correct, it can cause uneven wear of the Tire and damage to the Sprocket and Chain.
This is a Tool of Recommendation for those who are interested in getting ChainAlignment right!
View detail
a little expensive
10mm on brembo OEMHose, works well.
I like the fact that there are many Size options.
It is more expensive, but Individual Youth offers Quantity:2pc. Set is enough, so Quantity is wasted.:Better than paying high Gold amount for 1 Set of 10pcs.etc.
However, I think there are cases of multiple Wiring, so 4 to Quantity:Variation of 1 Set of 6pcs. is also desired.
View detail
Switching from Digital torque wrench
[How is it used?
I have been using KTC's Digital ratchet until now.
In use Alarm sounds when setting Torque is reached in Spec.
It is difficult to stop the tightening at the time of sounding but setting TorqueExactly to stop
If it's around 10N.m, it's not so much Over, but around 30N.m, it's up to the latter half of 31N.m.
The display goes and so on.
I'm not sure what's going on, so I'll stop at Mechanical's Cutting edge.
Buy MechanicalTorque wrench from Tonichi
Was the one you received as per Image?
as pictured
How was your experience with it?
The initial setup is a bit tedious.
I still feel more comfortable with Mechanical.
The easy-to-understand structure of the Torque, which can be locked with a click, is good.
There is just no visible N.m. indication, but it may be due to the degree of tightening.
I don't know, maybe it's Overtorque.
It's invisible, so it's good!
[Points to note]
So much so that I always drop the scale to at least Torque when I'm done using it and store it.
Digital ratchet is easier and hassle-free in this area.
How did it compare to other products?
Digital ratchet is a method of specifying the target Torque as a number and stopping it when it sounds.
Simple and easy to use for everyone, but the Spec.
Tightening multiple parts is difficult to do quickly.
The preliminary alarm sounds, and from there the main alarm sounds and reaches the set torque, but it takes a long time to close from the preliminary alarm to the main alarm while watching the situation slowly.
On the other hand, with Tonichi's MechanicalTorque wrench, it's just a click and you're done.
I can tighten them one after another.
Of course, if you tighten it with a lot of force or over the zone of idling after cutting, it will over, but if you do it normally, it can be tightened precisely.
I don't often use both Digital and Mechanical, but I'll probably end up using only Mechanical.
View detail
To use Point
I recently used it in a Tire replacement.
I was A little inquisitive as to whether this was the right way to use it.
View detail
Normal for a Ratchet.
For some reason I didn't have a Ratchet in this shape, so I bought one.
Those who want to turn the machine in fine steps in a deft manner may find it a little lacking.
View detail
Buy for Maintenance
The scale is colored for easy understanding.
It is used infrequently, but it is used for Large.
View detail
Step up from SteelScrew!
[How is it used?
Screw was replaced with external Fender, so Screw was changed from Steel to Material:Replaced with Stainless Steel.
Was the one you received as per Image?
Quality is as good as the Image.
Was the installation difficult?
Installation is easy as the SteelScrew is simply replaced.
How was your experience with it?
Fender is often exposed to moisture, so the replacement was made in consideration of durability, but it can be used without worrying about rust, so it is a sense of security.
[Included Parts:were they on?
No other than Screw.
[Was there anything that disappointed you?
The NORMAL Screw is slightly rounded, but this is a dish Screw, so the shape is slightly different.
▼I'm afraid of biting, but I think it is better than Steel rusting.
View detail
RokudaboPlug replacement
[How is it used?
Purchased with Plug as it is needed to replace Plug in CBR600RR PC40.
Was the one you received as per Image?
The quality of the plug wrench is good and the magnet in the plug wrench makes it easy to catch the plug.
How was your experience with it?
As a plug wrench, it does its job well and is highly rated for its texture.
However, since this was my first time replacing a 4-cylinder plug, I struggled with replacing #2 and #3 and eventually gave up and asked Motorcycle shop to do it for me.
We were told that a less thicker plug wrench would be more suitable.
I don't know if I will have to come back to it in the future, but it was good as a Plug wrenchSingle Body.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Used for Torque management of brake hose banjo adapter tightening
Aluminum banjo to avoid cracking and splitting due to over-tightening.
Wobble is minimal and the feel is good.
There are not that many scenes used, but since the price is Reasonable, I don't think it's a problem.
Note that the mounting orientation on the Torque wrench needs to be corrected, so we recommend referring to the WrenchManufacturer's usage instructions.
View detail
Bolt replacement in prominent areas allows you to use it without worrying about Rust!
[How is it used?
I purchased this to replace the Fender mounted Bolt on the Front fork.
Was the one you received as per Image?
It was shiny and high quality, just like the Image.
Was the installation difficult?
It can be easily installed by simply replacing the Bolt with a NORMAL Bolt.
How was your experience with it?
It can be used without worrying about Rust.
It is also shiny, though not as shiny as Plating, and good for the price.
[Included Parts:were they on?
No other than Bolt.
[Was there anything that disappointed you?
Not particularly
We do not recommend this because we are afraid of gnawing on the area where the heat is applied.
I appreciate the wide variety of lineups, such as ▼length and large size.
View detail
This is a useful tool that one should have at home!
[How is it used?
I had been using a cheap Ratchet Handlebar, but it started behaving suspiciously, so I bought a new one.
Was the one you received as per Image?
KTC is a quintessential KTC company. It has a solid weight, stable operation, and I could tell immediately that it is of high quality. The tool is just as I expected.
How was your experience with it?
Accurate and stable tightening and loosening.
Although the handles are plating instead of rubber, they are less susceptible to deterioration than rubber, so durability can be expected.
[Points to note]
The switching is no problem, and it can be changed from Snap to Snap, which is totally different from cheap ones. It can be used without any problem even if it is applied in a slightly large Torque.
How did it compare to other products?
I have only used cheap ones so this may not be helpful, but I wish I had purchased it earlier as it has enabled me to install and maintain Parts accurately and consistently.
KTC is the best. It is so good that it makes me think of replacing other tools with KTC little by little.
View detail
good
There is no space between the top Right edge and the bottom Left edge, so you can't remove that Large size, but it was comfortable to touch and the Large size was reasonable, so it was easy to use. View detail
Great tweezers
Love these so far. They are a great build quality that feels sturdy in the hand.Works great and made from metal so it's more environmental and sustainable material. Pleased I avoid buying another plastic tool.definitely recommend View detail
It is intended as an alternative to in-vehicle tools and for emergency use on the road.
The ZX-6R has an on-board tool storage compartment in the back of both the Tandem seat and the optional Single seat cover, but to use it, the storage bracket must be removed with a Hexagonal Wrench. It is very inconvenient though it is appreciated.
Since the servo motor of the exhaust device was removed to replace the external Slip-on Silencer, we decided to use the space to enhance our on-board tools and purchased this Compact with a minimum of tools.
For suspension setting, the Rear rebound damping force cannot be adjusted here, but I don't think this is a place that needs to be changed frequently in terms of usage. I have made a judgment on this.
Front can be used for each adjustment point.
I think it is better to prepare proper tools for daily maintenance, but I think it is better to separate it from emergency use on the road.
View detail
520Chain Exchange
I purchased this for Chain replacement.
It is easy to understand if you DID watch YouTube before working on it.
hang carefully and accurately.
View detail
Spare parts for Kashimaru-kun
I broke a Pin during Chain cut, so I bought the part. View detail
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Protect your spark plugs while out riding trails
It would suck if you got stuck in the boonies because of a fouled plug and you're not carrying any spares. This case works perfectly. The most important thing is to protect the spark plugs from impacts that could change the gap or damage the tip.Not sure about larger plugs, but this was absolutely spot on for my bike plugs.It's made of a quality plastic.Really good price. Small and very secure, for longer trips. Especially when going into the local dark continents, where no one else goes. Good travels, safe journeys, and... go prepared. No one else cares, or goes. View detail
Lining Peeled Off Tool, but also useful for peeling off the exterior
The product name is Lining Peeled Off Tool, but it is also useful for removing the exterior.
There are two types of shapes, and the principle of leverage makes it easy to apply force, but it is likely to break if force is applied too much.
It's better to break it before the exterior cracks, though,
PushPins and other difficult-to-remove items can also be removed.
When using the product, cure the contact surface with Curing Tape, etc. before use.
View detail
Where Solder is connected, etc.
It can be used for branching connection with a solder, protection of Cable, etc.
It would be better to shrink them with a heat gun, but they are shrinked by lightly frying them with a lighter.
Be careful not to put the flame too close to it or it will melt.
View detail