Reviews
Used for Brembo caliper
I purchased the Beta pin for Caliper's Pad pin because it had run out at some point.
It was cheap and saved me a lot of money. I will be Wiring it just in case.
View detail
Great item!! Highly recommend
This item is durable and well worth it. The carpet is thick and heavy duty. Perfect to use to display the bike at shows. Really vibrant colors that pop View detail
Convenient
I've been working on the ground, squatting, sitting or kneeling,
My buttocks would get cold when I squatted, and it hurt when I kneeled, so I covered it up with an old Towel or something like that.
I just happened to find this Matte on our site and gave it a try,
If you fold it up, you can sit on it, if you lay it down, your knees won't hurt, and it's a friendly place to keep the tools you use,
It's a good thing, isn't it? (Laughs)
View detail
Used to remove the Clutch of LETS4Palette
When removing the clutch outer of the LETS4Palette, the nut holding the clutch outer in place was used to loosen it.
I was able to loosen a nut that did not loosen at all with the 150~180mmRatchet wrench I usually use.
Because of its long overall length, it is a convenient tool that can be used to apply large torques even by human power.
View detail
You look good.
[How is it used?
XR230 Used for Valve Matching
Was the one you received as per Image?
Image
How was your experience with it?
We have completed the Valve matching process without any problems.
[Points to note]
It is a small package, but there is so much in it that you can't use it all.
No problem!
View detail
Low price but sufficient Quality
The price of Motion pro was too high, so I went with this one. The price is a quarter of the price, but the quality is solid and this product should be sufficient. The box is just a bonus, and the lid closure is so roughly made that it won't close after a few uses. View detail
![[Repair / Optional Parts] X-Ring Type1 (O-Ring)](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0279/24752986_1_TS.jpg)
I've been looking for you
I was going to buy something expensive at Oak Auction because it was hard to find.
I am glad I was able to purchase it here.
View detail
I think it is very cosy. It is carefully made.
I have been using Quantity for many years now.:The socket adapter of the set finally broke. I was looking for a replacement, and this product seemed to be the cheapest and the most well-made, so I bought it. I bought it because it seemed to be the cheapest and well-made product I could find. It fits very snugly and is easy to remove, and I think it is very cost effective.
I don't know about durability, but it looks good, so I gave it 5 stars.
View detail
For mounting bolt on Generator cover
I bought it for mounting bolt of Generator cover of CUB series Engine.
The bolt under the Left is the same length, but the main reason I purchased this bolt is because the OEM bolt here is stuck in the back, so it is difficult to insert the tool.
View detail
Great tool set makes working on my bikes easy.
I like these wrenches.high quality, japaned made,feeling hand perfect.the cost is right and works fine They are quick and easy to use and I keep them with my tool box.The length is sufficient. It is not too long. It fits in the tool box. It is quick and easy to check tightness of almost every bolt on my bike with these while riding or servicing my bike.Wish they offered a set with 7mm and 13mm.Highly recommened. View detail
![[Repair Parts] Socket Set Screw](https://img.webike-cdn.net/catalogue/images/107206/00-00-0510_TS.jpg)
The pack of 6 replacement socket set screws sure come in handy
About quality and texture - The socket set screw from SP Takegawa is made from stainless steel and is sized at M3 x 4mm while the quality from the overall fit and finish is perfect. About the feeling of use - The socket set screw is used on the drain bolt with magnet and does a wonderful job of securing the stick temperature sensor but being so tiny are easily lost so the pack of 6 replacement socket set screws sure come in handy. Products to buy together - The socket set screw are a key part to work together with the drain bolt with magnet as is the sealing washer which are a product worth buy also. Difficulty of installation - The installation of the socket set screw is a simple task that took 0.1 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the socket set screw into drain bolt with magnet. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the socket set screw is no different. Having the pack contain a quantity of 6 socket set screws helps achieves this. About shipping and packaging - With there being no cost difference between sea freight and EMS for the socket set screw, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing small common use products like this from Webike Japan is the best option when combining multiple parts together if you are also taking into account the shipping cost. View detail
Easy Plug replacement
I've been using the OEM plug wrench for a while now and it has definitely made my work easier. View detail
For Chain exchange.
Used to replace Chain in 428 Size.
It is convenient to have multiple Adapters and to support various Chains. The texture is cheap, but the whole thing is rigid, and I think Large things like Pin are well made.
If you only need to replace it once, it is cheaper to ask a supply store, but doing it yourself is simply more surface white and satisfying. Durability is unknown.
View detail
Trust.
It claims to be weather resistant, so trust it anyway.
I have always been an Emon believer.
… I don't think it's any different than the others, … (laughs)
2sq for Grounding Wire.
View detail
No wasting Gasoline
The Breather Hose 650mm 6mm Diameter on the tank cap of the KLX230R does not have a valve, so when it falls over, gasoline leaks out. However, I wanted to prevent leakage by attaching a valve to the tank cap to prevent physical exertion if I rushed to wake the tank cap up. Actually, I bought a Short Type with a Valve on the tip of the Hose before this one, but when I fell down, Gasoline dripped out of it. It is a pity that I cannot match the color with Kawasaki. View detail
Good accuracy
I had been using cheap valves and Type radio pliers, but I decided to go with a proper Manufacturer's product, so I chose KTC's Radio pliers.
Even with a strong grip, there is no gap at the tip, and the precision is as expected.
View detail
With this.
Minimum required tools.
If you are going to modify the electrical components yourself, at the very least, this should be enough to make the Large sturdy.
There are cheaper ones, but they are difficult to use or lack Size….
If you look above, there is no Drill, so for now, here is the Recommendation.
View detail
Black and Silver&Pink were made Purple.
[How is it used?
Brake&Clutch lever
Universal Bracket, etc.
Was the one you received as per Image?
The product was exactly as shown in the Image.
Was the installation difficult?
How was your experience with it?
It is very beautiful and I like it.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
No gain.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Used with Axle Nut
No problems with this product. I use it with Axle Nut on my off-road motorcycle.
For a moment I thought about substituting Pliers, etc., but then I thought, well, I'll just buy it and add another Socket! (Lol)
SIGNET is a Brand that I trust, so I chose them first based on cosmetics. The performance is also fine.
View detail
Regular Spoke Tension Checks.
It's been 2 years since I bought an OffRoad racer called KLX230R. I compete in the G650 XCOUNTRYRace once or twice a year, and sometimes go on Course runs. And I noticed that the Rear Spoke is off by 1 pc and quite a few of them are loose. I bought a Spoke wrench, which fits my KLX230R. It seems to be rigid and I think it will be fine to use in the future. View detail