Reviews
It purchases, in order that four minis may carry out bore up. I think that they are satisfying enough goods since torque can be finely adjusted if a price is considered although memory is hard to see.
It purchases, in order that four minis may carry out bore up.
I think that they are satisfying enough goods since torque can be finely adjusted if a price is considered although memory is hard to see.
View detail
They were goods which can feel the improvement in working efficiency with a tool after a long time. although each field of the chain was boiled, respectively and was polished until now, it is the favor of this product and working hours became a minute
They were goods which can feel the improvement in working efficiency with a tool after a long time.
although each field of the chain was boiled, respectively and was polished until now, it is the favor of this product and working hours became a minute half [ about ].
However, since woolen hardness is quite hard, if it rubs too much not much strongly, a possibility of damaging a seal cannot be denied.
Since it is considerably pleasing individually, they are four stars.
View detail
It is convenient if you are. In the case of a motorcycle, 8, 10, and 12 are arranged by T wrench, and if others are constructed with this and an extension bar, they will think that they are efficient. As for the feature of this product, the die le
It is convenient if you are.
In the case of a motorcycle, 8, 10, and 12 are arranged by T wrench, and if others are constructed with this and an extension bar, they will think that they are efficient.
As for the feature of this product, the die length of 3 / 4 field case is [ 160? and a few ] that it is short (200? thinks many [ other manufacturers ]).
Since it is a tool which plays an active part to work quickly rather than using [ strong ] from the first, applying it, the shortness of this few and the merit of management are pleasing.
View detail
It purchased for belt exchange super [ DIO ] etc. flexible only for a honda, although there is only for a honda and work progresses -- it does not go away -- it becomes a minus point however once.
It purchased for belt exchange super [ DIO ] etc.
flexible only for a honda, although there is only for a honda and work progresses -- it does not go away -- it becomes a minus point however once.
View detail
It is because the motive of purchase is needed by exchange of the rear sprocket of a minimoto. Although the low thing of the grade of KTC was always used, since the angle was attached, the glasses wrench interfered in the tire and did not go into a nu
It is because the motive of purchase is needed by exchange of the rear sprocket of a minimoto.
Although the low thing of the grade of KTC was always used, since the angle was attached, the glasses wrench interfered in the tire and did not go into a nut.
By a spanner, since it did not bite firmly, it was not able to be used.
Since only a straight type can be used after all, it purchases hurriedly.
There are various manufacturers of a tool and a price is also PINKIRI.
It was decided for the reason with ? for which prices are also not combination but both glasses (a spanner is not needed), and the machine of the honda uses them so so under such circumstances that it would be this glasses wrench.
It is the highest when it uses.
(1) It adapts itself to a hand slenderly and a feel is transmitted easily.
(2) The head is a little somewhat smallish (being 17 mm outside-diameter 8.5 mm in thickness of 25 mm).
With the 26.5-mm outside diameter of 10.5 mm, KTC which it has can be used, even place [ narrow ].
(3) Since one of the two is six angles, when hanging firmly, it is convenient, and it is a stake to a slight lack about the head.
(4) Die length is also right just and torque tends to apply it.
It was such touch.
When a straight is in a tool box, it is a useful tool.
View detail
Since he thought that it was not so frequently-used, the correspondence size purchased fewer things. Although quality articles had not been used, it was able to use satisfactorily especially. It used in order to extend a part for the groove portio
Since he thought that it was not so frequently-used, the correspondence size purchased fewer things.
Although quality articles had not been used, it was able to use satisfactorily especially.
It used in order to extend a part for the groove portion of a bolt, but the surroundings of the nut were not necessarily astringent and cut the slot firmly.
Cost performance is high.
He needs to buy it, after often checking whether there is any required size, since there are merely few correspondence sizes.
View detail
Since at least 7L enters, klx250 is reserved as insurance. Although not used actually, it is satisfactory in comfort.
Since at least 7L enters, klx250 is reserved as insurance.
Although not used actually, it is satisfactory in comfort.
View detail
It purchased for WR exchange of the cygnus X. Although the impact wrench performed removing, since impact was dreadful, bolting also used this! I think that it is user-friendly and I will use it also for exchange of a future oil filter. A price is
It purchased for WR exchange of the cygnus X.
Although the impact wrench performed removing, since impact was dreadful, bolting also used this! I think that it is user-friendly and I will use it also for exchange of a future oil filter.
A price is also handy and a recommend.
View detail
It was small than expected.
It was small than expected. View detail
It purchases, when attaching a brake hose. Although he plans to use it with the torque wrench which it has by torque management and being purchased, regrettably from the form of the torque wrench which I have, banjo metal fittings were not able to ent
It purchases, when attaching a brake hose.
Although he plans to use it with the torque wrench which it has by torque management and being purchased, regrettably from the form of the torque wrench which I have, banjo metal fittings were not able to enter and use it.
If the place to say and which is passed and inserted and the place into which metal fittings are put are separated ... I thought ..., although it did not need to wear with the head portion of the torque wrench.
The point which calculation of torque worries although what was necessary was possibly just to have had extension joint.
When purchasing, isn't it reconfirmation necessity about a use torque wrench?
But I think that the goods themselves are good.
View detail
10 mm and 12 mm used well. Although the spanner of the 1980 yen set of a home center was used until now, since it was easy to lick with the experienced screw, it is safe now. It is one article good texture and satisfactory.
10 mm and 12 mm used well.
Although the spanner of the 1980 yen set of a home center was used until now, since it was easy to lick with the experienced screw, it is safe now.
It is one article good texture and satisfactory.
View detail
Although this manufacturer uses for the first time, it is firm structure, and even if high money does not buy it of a famous manufacturer specially, I think that it is enough. The point of the long portion became the feeling which is the torque of cor
Although this manufacturer uses for the first time, it is firm structure, and even if high money does not buy it of a famous manufacturer specially, I think that it is enough.
The point of the long portion became the feeling which is the torque of correspondence, and was acquired and made into it stop tampering.
Since if you do not buy this with this was thought.
Since the tightly also of the using feeling is carried out satisfactorily, it uses also at work.
Probably, they are five stars if it is this at this price.
View detail
It is user-unfriendly. Since capacity is small, it is troublesome, tightening a bolt repeatedly or - Loosening! However, since it is cheap, it is unavoidable. The recommend of the air-bleeding tool to which the tank was attached is carried out.
It is user-unfriendly.
Since capacity is small, it is troublesome, tightening a bolt repeatedly or - Loosening! However, since it is cheap, it is unavoidable.
The recommend of the air-bleeding tool to which the tank was attached is carried out.
View detail
It purchases simultaneously with the battery charger 71199 made from a daytona. This wiring can be connected to the connector which comes from a charger body by one-touch, when attaching to the terminal of a battery body and charging. In the case
It purchases simultaneously with the battery charger 71199 made from a daytona.
This wiring can be connected to the connector which comes from a charger body by one-touch, when attaching to the terminal of a battery body and charging.
In the case of purchase of the battery charger of a daytona, if it purchases together, he will think that it is good.
The direction which owns two or more set motorcycle is good to buy it by the number.
View detail
The portion to which hair ends are also solid and this product of the back side is not visible is also worn firmly. Considerably, although used several times with GOSHIGOSHI, for the moment, there is also no downs and it is likely to carry out so so d
The portion to which hair ends are also solid and this product of the back side is not visible is also worn firmly.
Considerably, although used several times with GOSHIGOSHI, for the moment, there is also no downs and it is likely to carry out so so durability of the used comment.
View detail
In order to remove a flywheel, it will not start, if there is almost no puller. Although it had come out of various manufacturers, and it had become the same price generally, since the screw size was written with the photograph, it purchased here.
In order to remove a flywheel, it will not start, if there is almost no puller.
Although it had come out of various manufacturers, and it had become the same price generally, since the screw size was written with the photograph, it purchased here.
Although it was purchase for exchanging the crank of PW50, honesty and a screw size are not known but the internal thread of a flywheel is measured with vernier caliperses, and from that it was about 27 mm and screwing having been a reverse screw, it judges that it will probably be OK and purchases.
It equipped and was tight.
As it is, adhesion is carrying out, it does not separate, but the shaft of a flywheel (the screw of a puller is likely to be damaged) is oiled, grease is applied to night waiting and the thread part of shaft aggressiveness (?) of a puller, and it challenges again.
It escaped frankly.
Since there were also various screw sizes of a puller and how to remove, it did not understand whether it could use for all the motorcycles, but it was able to use for PW50.
I think that power will enter if it changes and turns to a longer round bar when power is more nearly required since it escapes from a handle.
View detail
The parenthesis of a light and red color is good. Something is a connoisseur when it puts in the tool box. Is it what you may have for the man of a tool lover? Since the skid was given to the surface, it was able to turn to it firmly, without
The parenthesis of a light and red color is good.
Something is a connoisseur when it puts in the tool box.
Is it what you may have for the man of a tool lover?
Since the skid was given to the surface, it was able to turn to it firmly, without sliding.
The minimoto of ten inch wheels was also able to be used satisfactorily.
When going for touring, since the way of the valve cap which carries out the Mus time and is attached is not lost, it is recommended.
View detail
DUCATI: Use it for a street fighter. MDF: When constructing 6 mm of rim stripe set white, it was used, but it has equipped very finely by the favor of this. if exact construction can be performed in an amount of money of this level although dissat
DUCATI: Use it for a street fighter.
MDF: When constructing 6 mm of rim stripe set white, it was used, but it has equipped very finely by the favor of this.
if exact construction can be performed in an amount of money of this level although dissatisfaction has come out of other Users of the in respect of the amount of money -- being appropriate -- is there nothing? I am very much pleased with this product.
View detail
Air-bleeding pump Although purchased, it was used for brake fluid pouring of a zephyr.
Air-bleeding pump Although purchased, it was used for brake fluid pouring of a zephyr. View detail
DUCATI: Use it by a street fighter. This product is put into work, without removing sheathing at all, and is found useful very much. Since it is made of a quite thin belt, vehicles like a love machine without a crevice are also satisfactory. S
DUCATI: Use it by a street fighter.
This product is put into work, without removing sheathing at all, and is found useful very much.
Since it is made of a quite thin belt, vehicles like a love machine without a crevice are also satisfactory.
Since a tool kit was SIGNET, although arranged by the brand, very good shopping was carried out.
View detail