Reviews
On the MVX250F.
I used it to fill the front fork with air. It's good because I can fill low pressure like 0.4 properly. View detail
Shape differs from the photo shown!
The photo shown here differs from the photo of the item sent to us.
The photo shows a slightly angled one with a split center, one side was Straight, so I bought it, but the one I sent is 90° right-angled, and the other side is a slightly slanted shape, which is totally different.
Only the color is the same in purple, Material seems to be resin and scratch resistant and looks good, but the shape is different from what I wanted. The price is not good.
View detail
substitute for an another
I bought this for a replacement for a plastic hammer that had a scratch or dent on the head. View detail
Ideal for NAKED's Engine area!
As per the Title, it is ideal for cleaning around the Engine of Naked motorcycle!
I have been driving a GSX1400 motorcycle for 16 years. The front side of the engine is hard to clean because of the oil cooler, exhaust pipe, oil line, and oil filter, and I have half given up on cleaning it.
However, I didn't want to leave it like this, so I was looking for something better and found this.
I purchased this product expecting it to work as well as it looked, but it was even better than it looked!
The size is a little large and the core wire is hard, but that is good!
A 1400cc straight-4 Engine is wide, and being wide means that it takes a certain amount of force to shove Brush into it and scrub it.
LargeSize and hard core were exactly Exactly for my use.
Also, the core Wire is not very thick, so it will properly fit into the gap.
After washing the car using DAYTONA's Shampoo in combination with this, Engine has regained the beauty of its original black paint!
This is highly recommended for those who want to keep Naked motorcycle's Engine appearance beautiful!
View detail
I love it.
The Large is very good and I use it for Oil change trips.
There is no problem in particular, but if I may be so bold, it would be helpful if the paper could be folded easily.
View detail
I found it difficult to use myself.
Maybe I am clumsy, but I was able to apply it more neatly when working with FreeBand. If you are dexterous, this is a good product. View detail
Used for Overhaul
Used on NSF100 front forkOH.
Essential Items for oil level adjustment.
The hose and syringe are sometimes easy to disconnect.
View detail
Purchased for personal use
[How is it used?
Purchased as an on-board tool for my motorcycle
Was the one you received as per Image?
KTC, so the texture is good and just like the Image.
How was your experience with it?
It fits with Snap and has good dimensional accuracy and can be used with confidence.
It is inexpensive, so it's great for personal use.
View detail
Replaced with a reliable manufacturer's product for future Motorcycle tinkering.
[How is it used?
I used to use a tool sold at Home center, but I was licking the Nut and so on.
We purchased this product as a reliable manufacturer's product.
Was the one you received as per Image?
Matte texture, Laser marking and was as per Image.
How was your experience with it?
The dimensional accuracy is also no problem at all, and it is good to fit Snap to Nut.
Matte texture also fits well in the hand.
How did it compare to other products?
It is a world of difference from the inexpensive tools sold at Home center. A little more.
I regret not buying it earlier.
Requests, etc. to Manufacturer
When the tool box is stored upright, it is unstable because of the protruding hinges,
I would like to see a structure that does not stick out.
View detail
Good texture
[How is it used?
Purchased at the same time as the 65-piece AutoMechanic set from the same manufacturer.
Was the one you received as per Image?
The Matte texture is pleasant to the touch and the Laser marking is very clear.
How was your experience with it?
There is no dimensional error and it fits Snap and Nut so it is safe to use.
View detail
An air pressure gauge is recommended.
I ordered an air pressure gauge to use on the circuit.
I usually use snap-on products. The price is very expensive and it is discontinued so it is difficult to find.
This product looks a lot like a snap-on.
When I actually used it on the circuit, it worked well and was easy to use.
The price is cheap and I recommend it. -------------------------------------------------- -------- I ordered an air pressure gauge to use on the circuit. I usually use snap-on products. The price is very expensive and it is discontinued so it is difficult to find. This product looks a lot like a snap-on. When I actually used it on the circuit, it worked well and was easy to use. The price is cheap and I recommend it. Powered by Google Translator
View detail
Size is also convenient to carry.
I take it with me when I go to the woods. It is lightweight and just right in terms of Size. I think the air pressure measurement is also accurate, which is important. View detail
TS125R.
This is the Hose of the 2-st Oil.
This is the transfer section from the oil pump to the carburetor.
When cleaning the carburetor, the existing hose was replaced because it had broken due to deterioration.
I.D. 2mm was not found in any homestore or supply store.
View detail
Let's use it for Oil exchange!
When replacing oil, it is easy to fail to catch the oil if the waste oil is thrown away, but with this, it is safe.
There is no such thing as a failure and overflow.
It makes a difference whether you have this or not, and you can replace the oil with confidence!
View detail
It cannot be used for Shinobi Sen Cowl (crying).
It's my fault for not checking carefully, but I bought the upper 6 push rivetsfor replacement of the front under cowl on my 2014NINJA1000, but the inside rivet size was thicker than the OEM Product and did not fit in the holes&hellip I bought this rivet for replacement for the upper 6 push rivetsfor the front under cowl of my 2014 NINJA1000.
For your information, the correct OEM Product number is 92039-0068. to
View detail
For CUB Oil replacement!
I like this one because it is inexpensive, contains two sheets, and is copper!
The oil can be replaced with confidence because it is properly crushed!
It's essential to replace the Oil in CUB110!
View detail
Convincing texture
SizeAbout 820×I bought the one of 2000mm 。
I liked the texture of the Nylon raising on the front.
When I unpacked it, there was a smell peculiar to Rubber, so I dried it in the shade for a couple of days.
I was not sure if I wanted to go with a less expensive competitor, but I am satisfied with the DAYTONA product.
View detail
OEM products of other Manufacturer?
[How is it used?
When SUZUKI/CHOINORI replaced a tire, the air valve was cracked, so this tool was used to replace it with an OEM product.
Was the one you received as per Image?
It was just as Image.
Perhaps this product is the same manufacturer as the products sold by AstroPROducts, Amazon, etc.
The color, shape, etc. are similar.
How was your experience with it?
There were no problems with use at all.
A fair amount of force is required to pull the Valve.
[Points to note]
When connecting to Valve, it is necessary to remove the Parts called Insects in Valve.
How did it compare to other products?
I have not used other Manufacturers, but I think the low-priced ones are sufficient because there is almost no difference in Gold amount.
View detail
Easier to grip
I used to use Emon's Air gauge, but when I put it away, I accidentally closed it without removing the Air gauge and the gauge stuck and would not return to Zero. View detail
Tightly sealed. Very easy to use and durable, if you are not sure which Oil Jug to choose, this is the one.
There are many Oil Jugs out there, but I bought this one because it has a lid and is just the right size.
There are three points to this product. The product does not need to be wiped clean every time, the liquid can be left in a sealed bottle, and spare parts are available.
The work is faster and less garbage is generated because there is no need to wipe up every time when the work is finished.
In particular, the ability to leave the liquid in place is quite an Advantage, and can be used, for example, in the following ways
1. Prevents Garbage contamination during work.
2. Oil replacement work can be done across the day.
3. Easy to reuse waste oil
4. Easy transfer of fluids
All items are related to personal DIY.
The first is obvious, but the second is more convenient and easier to set up for DIY. Even if it is already dark when the last injection is to be done, it can be carried over to the next day or even a few days later. This is especially useful for cases that take a long time to inject, such as Mission oil for cars.
3 is also important for me personally. For example, it is useful when maintenance around Overhaul or Clutch requires removing oil once, but you want to reuse it instead of using new oil.
The oil is a typical example of a motorcycle rider's sense of value that is easily bugged, but if you think about it calmly, it is very expensive, and I don't feel the need to replace it with new oil every time, especially when the clutch cover is opened.
4 was a useful Point that I realized after I bought it.
For example, for waste oil disposal, we used to make a waste oil pack, but now we receive the waste oil in an oil pan, return it to a jug, and then put it in a plastic bottle and take it to disposal. This kind of troublesome liquid transfer can be done cleanly.
Items is useful, but there are drawbacks.
First of all, the base of the nozzle sticks out in the bottle and leaves oil. This is not good.
Also, the Mesh at the base of the Nozzle is subtle. It reduces the injection speed.
The protrusion is not a functional part, so opening a horizontal hole may solve the problem.
A weak point in durability "Nozzle" I have been using it for about 4 years and it hasn't cracked.
This is a good product that I can highly recommend in JUG. Seriously recommended.
View detail