Reviews
Fits: HUSQVARNA TE300, SUZUKI RM125, SUZUKI RM250, KAWASAKI KX250, KAWASAKI KX125, HONDA CR250R, HONDA CR125R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX
Soft touch
Although the hand guard was still attached, the throttle tube was cracked and battered from the repeated impact of falls, so it was replaced.
Since I wanted to try a different grip on the Clutch Side than on the Normal side, I chose the Soft side.
I haven't driven far or on forest roads yet, but I expect it to reduce fatigue.
View detail
Fits: HONDA CR125R, HONDA CR250R, HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR250F, YAMAHA WR450F, YAMAHA WR450F
Best of Thin Grip
YZ125X (MY22) The first time I went out to Race, I installed it on a
Before this, ZETA's BaseGripSlim (ZE47-6021) used to use.
situation in which a person's hands are small and their face is partially concealed (esp. from behind the scenes) (Gloves are available in Men'sS Size or LadiesL Size) So, I am constantly looking for a thin Grip.
If you look at MAJOR, I think this ODI no-waffle or ZETA's BaseGrip would be the smallest diameter at 29mm. (Check yourself)
I feel that there is less vibration in my hand compared to my previous ZETA BaseGrip.
It may be a difference in Compound, since ZETA should obviously be thicker in Rubber thickness due to its structure.
Of course, the ease of installation that Lock on grip offers is very good.
The ease of removal is very appreciated when you want to switch between multiple Handlebars for a test run.
Also, in the case of YZ125X, it can be installed with the supplied Cam.
There are two caveats.
One is with the hand guard.
Since this grip has only a closed end, it is necessary to drill a hole in the grip end to attach a closed hand guard.
Unlike ordinary grips, the inside is made of a plastic tube, so it is necessary to use a Footpeg Drill or similar.
The other is with Handlebar.
If the Knurl on the Clutch Side of the Handlebar is Large, it will not fit unless the Knurl is cut away to some extent.
I put it on a Pro taper Konzer and it scraped off quite a bit of Knurl.
I had a ClosedHand guard + Konzer, so it took me about 30 minutes to install it.
I will have to use it more in the future to see how it works, but I feel this is fine unless you are very Muddy.
View detail
Fits: HONDA CR125R, HONDA CR250R, HUSQVARNA TE300, SUZUKI RM250, SUZUKI RM125, KAWASAKI KX250, KAWASAKI KX125, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250, KAWASAKI KX450F, KAWASAKI KX250F, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR250F, YAMAHA WR450F, YAMAHA WR450F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA SEROW225WE
fictitious advertisement
Since lastOrder
I was informed that it was discontinued and then the listing was also discontinued.
I give up.
I ordered it, but they said they could not accept my order because the product was discontinued!
Please don't put anything on the site that I can't afford.
Please be aware of this, everyone!
View detail
Fits: HONDA CR125R, HONDA CR250R, HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR250F, YAMAHA WR450F, YAMAHA WR450F
Quite soft.
Compound is quite soft.
The Grip is soft enough to be squishy when pushing and carrying Motorcycle. However, because the grips are thicker, it is easier to raise the arms. It is also a little harder to use intuitive controls.
Both the Clutch Side and Brake Side can be easily replaced because they can be installed without glue, but I am a little concerned that the Clutch Side may come loose.
View detail