Reviews
There were no problems.
The light came on without any problem. I was able to use it normally. View detail
Blinker Bulb of a bygone era
Ordinary Blinker Bulb being eclipsed by LEDs View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA XSR125
LED conversion of CYGNUS
Only Blinker of CYGNUS was a light bulb, so Relay and Quantity were used to convert it to LED.:I purchased this product from Set.
It was a little Large strange to remove the Cover, but I managed to work with it.
The price is honestly high, but I am satisfied.
I wonder if Hazard and Passing switch are next…
View detail
It's bright.
It's too bright.
Personally, I also think it could have been a little more understated.
It seems to bother him when he gets dazzled...
I think you will be satisfied with the price.
I think it will be a confirmation of durability etc. in the future.
View detail
Fits: HONDA MSX125 (MSX125 SF not available), HONDA glom
It is recommended for those who want to keep the NORMAL blinker lens etc.
Tail lamp was originally LED, and the headlight is also LED. If it becomes like this, it's natural that I want to make the blinker LED too. (？) thing....I wanted to do something with the STD Shape, but after touring the other day, I told my wife It's hard for Blinker to see when Brake is on. That being said, I was inspired to buy one. I still wonder if the Valve lights usually lose out to the LED lights.
Because there is not much space inside of Blinker lamp when I confirmed beforehand, I bought this one, but the height of LED Bulb is unexpectedly low, and I think that the product of 05-08-0098 was good when I felt that I put it on.
Because there was no reflector at all in the Blinker of DL1000 V-STROM and it was still Black color of resin, I put Aluminum Tape inside instead of the reflector and made it so that the light would not become useless. The sharpness of the flashing is good, and I am satisfied. The only thing that was worried about was that the indicator in Meter when operating was not good. "Blinking" Not the Blinker. "point" When the Perdition. The thing is that the light is reduced when the I looked it up in the Roadway Vehicle Act and found that Article 41, Section 2, Article 137, 4-12 of the "A device shall be provided to indicate to the driver the operational status of the device. It's just that it is, so I don't think it's a problem for car inspection.
By the way, the area of the lighting part of the blinker lamp is determined to be more than 7? or more, orange, the brightness of the bulb is more than 10W and less than 60W, and the number of blinks is less than 60-120 times per minute. Because this time it is NORMAL and Relay is also for LED, the function of the important blinker corresponds sufficiently.
View detail
Fits: Others 12V DC vehicle with G18Size Valve BA15S(Parallel Pin) can be installed on the Blinker Valve.
LED bulb for twist flasher 12volt
An excellent takegawa LED light bulb with high quality for a honda-manka, works well and shines brightly even with a weak battery. I recommend buying. Only a high price that matches the quality. Can be used in other 12 volt equipment. Excellent LED bulb from Takegawa company with high quality for Honda-manka, it works well and shines brightly even with a weak battery. I recommend to buy. Only a high price that matches the quality. Can be used in another 12 volt technology. translated by google translate View detail
Fits: Others 12V DC vehicle with G18Size Valve BA15S(Parallel Pin) can be installed on the Blinker Valve.
LED bulb for twist flasher 12volt
An excellent takegawa LED light bulb with high quality for a honda-manka, works well and shines brightly even with a weak battery. I recommend buying. Only a high price that matches the quality. Can be used in other 12 volt equipment. Excellent LED bulb from Takegawa company with high quality for Honda-manka, it works well and shines brightly even with a weak battery. I recommend to buy. Only a high price that matches the quality. Can be used in another 12 volt technology. translated by google translate View detail
Fits: YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA CYGNUS X SR, YAMAHA XSR125
The installation is Large strange, but you can get a sharp light
My CYGNUS X has LED Headlight and License Plate Light If the Blinker is also replaced with LED, all the lights will be LED, and you will be able to get a new LED light I decided to replace it because it reduces the load on Battery even more
The Front Blinker is replaced by removing the HandlebarUpper Cover
Rear blinker should be replaced by removing the Helmet In Box
So far, it's not that difficult
The problem is the blinker relay
The blinker relay is on the inside of the leg shield, so there is no need to remove the front end of the blinker You must not
Quantity of Leg shield:Pair (for Left and Right) The bottom claw is so complicated to engage that I had to remove it with a cringe to see if it would break
After the exchange, it will no longer be an Orange colored Valve and will look Refreshing!
The blinking is also very sharp
The brightness is also perfect as there are 9 tips in one LED Bulb
Installation is Large strange, but I think the product itself is a good one
View detail
LED is still high as usual
I am satisfied except price..
Valve exchange can be done without removing Cowl, and when attaching the attached relay
Seat down Remove Cowl of Right Side only. Work is enough for as long as one hour.
Prepare Nipper for RearLens cover + Driver, Tie Wrap's Cut.
Like everyone said Kit (Relay) Relay's "Chi - Chirping
Although it disappears, Ninja 250 does not bother because it was Small because it was originally Ka Chica tone,
Since the winker is displayed on Meter, I think that it is a particularly problem.
Thanks to LEDization, until that time Barrel from the blinking light bulbs, light Sharp
It turns into flashing and it is Large satisfied.
In addition, power consumption, out of ball etc etc etc. Also considering whether LEDization is very significant.
The cost of LED is surprisingly reasonably cheap, so if the price becomes cheaper at a moment ◎
View detail
Fits: SUZUKI GSR250, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA CBR125R, YAMAHA MAJESTYS
Used in CYGNUS X SR (SEA5J)
I was worried about the Orange sphere standing out in the NORMAL and I was looking for a lot of things, and I found this product (05-08-0098).
As well as the LED bulbs, Relay can also be pontooned in the same shape and placement in the same position as the OEM.
It's a bit pricey, but you can buy Quantity:It's easy to install without having to worry about it. The only thing I have to say is that I had to be careful not to break the claws when removing the cowls.
View detail
Manufacturer designated blinker is safe
LED Bulb will be exchanged at the same time as Flasher relay. The picture was taken with the Blinker lens removed. When I see other people 's impressions, I thought that LED Bulb is dark, I thought that it was meaningless to pay by paying nearly 10 times the amount of Gold of ordinary Valve.
This item is written as Universal but Manufacturer is designating the type of Blinker to install.
My Blinker was an Aluminum Cut-out Blinker in the designation, so when I tried to replace it, it was normal enough with Valve, etc.. There is Level on the upper right. Reflector in Blinker seems to be effective. Moreover, since it makes a unique flashing of LED, it will be understood if it is hidden by Lens It is self satisfaction.
I will also pay a gold amount and one is Quantity : 2 Set I think that it is necessary and think that it is better to think and buy it.
View detail
Fits: SUZUKI GSR250, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA CBR125R, YAMAHA MAJESTYS
Mukawa LED Blinker
PCX is replaced by Valve 1 / 10 consumption and reduce the burden on Battery
Crispy flashing Satisfactory level such as sufficient light intensity and bulb's stealth effect. Relay is Wide range and sound is silent. Even in other types of cars / It seems that it will be the power consumption of 5.
View detail
LED BlinkerValve
Purchased along with MONKEY LEDization.
I am worried about rising Battery, I bought it for the purpose of reducing load even a little, but I do not know clearly the effect.
Although it is easy to purchase if it is a bit cheaper, buying cheap items makes it hard to break the ball immediately so purchase this time.
Durability is still being confirmed.
View detail
Fits: SUZUKI GSR250, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA CBR125R, YAMAHA MAJESTYS
All is in one.
I installed it in the 2013 PCX. This Set contains LED Bulb and Blinker relay corresponding to LED, so there are no other necessary items.
It is necessary to open the Front mask in order to exchange the Relay, but is it still to be completed within an hour until all the work is completed?
I am satisfied with the flicker with a peculiar LED
View detail
I could use it if I devised it
It's re-implementation.
At the beginning of installation, I was giving up using for lack of brightness.
After that, since the reflective material inside the Blinker was not on the side, when you stretched the Silver Tape of Kitchen supplies,
Light side of the LED also reflects and improved visibility, so it is something I bought with so much and the brightness is a little inferior to the usual Orange bulb, but here is the Parenthesis for the goodness of break when blinking, so use as it is I decided to.
View detail
After all it was dark
I exchanged with 23 W Valve, but the result Valve is brighter and clearer.
Internal structure of Blinker (Cut of Reflector or Lens) I think that it depends on the size of Large, but it seems that it did not suit yourself. (Not OEM)
The Lens part of my favorite car Blinker is stronger than 30 mm, but is it better if it is a smaller type?
But the sharp blinking in Sharp is more Parenthesis better than Valve.
View detail
It is okay.
We purchased with Stop lamp expecting Battery's burden reduction and durability.
Again as compared with the Filament sphere, although the light intensity is somewhat inferior, unlike Stop lamp I think that the visibility is somewhat due to the crisp shining method like LED.
Although it is insufficient of my own confirmation, although it was able to be exchanged for RearBlinker without problems, Double Bulb is included in the Front without Position lighting up, so the shape of the mouth Gold is somewhat different and it can not be installed, which is a bit disappointing.
As for durability, I just added it and I do not know yet.
View detail
Fits: SUZUKI GSR250, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA CBR125R, YAMAHA MAJESTYS
It shines beautifully!
Takegawa LED blinker BulbKit is attached to PCX for power saving and apparent Makeover.
Illuminated in a beautiful color compared to NORMAL bulbs, I think that Orange bulb was visible through Lens until now Clear, I think that refreshing looked a bit.
It's a bit expensive, but after all Takegawa is good!
View detail
Fits: SUZUKI GSR250, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA CBR125R, YAMAHA MAJESTYS
The SP TAKEGAWA Hyper LED Blinker Bulb Kit is an exact replacement for the bulbs and blinker originally found on my 2013 Honda pcx 150. Shipping time was phenomenal -- as though I had ordered the parts from a stateside supplier. Thanks
The SP TAKEGAWA Hyper LED Blinker Bulb Kit is an exact replacement for the bulbs and blinker originally found on my 2013 Honda pcx 150. Shipping time was phenomenal -- as though I had ordered the parts from a stateside supplier. Thanks View detail
Fits: SUZUKI GSR250, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA CBR125R, YAMAHA MAJESTYS
Great work business referred to as removing a Front cowl first of all (smile after clearing this, the smallness of a hand says a thing.) Although the removal of the Blinker bulb itself was easy, the place was narrow and a hand did not enter very
Great work business referred to as removing a Front cowl first of all (smile
after clearing this, the smallness of a hand says a thing.)
Although the removal of the
Blinker bulb itself was easy, the place was narrow and a hand did not enter very much well.
If it does with the
empty hand, it is injured, and that will be right and I will regard a work glove as necessity.
View detail