Reviews
It got brighter.
Replaced Headlight Bulb on Z125PRO.
The purpose was not only to make the engine brighter, but also to reduce the load on the battery (power saving). The Z125PRO had LED lights from the beginning, so there was no need to replace the tail lamps. I thought about replacing the blinker light because it has a normal bulb in it, but I decided not to do it because the blinker relay seems to be built into the meter and it would be complicated to change it to LED. This time, I decided to replace the Headlight Bulb and the Position Lamp with LEDs, and for the Headlight, I chose this product, which was the cheapest among the Sphere Light products.
The replacement work was as simple as removing the headlight cowl and replacing the valve with the original one, and since the valve is compact, there were no problems with installation.
As for the feeling of use, the light is bright enough and feels very bright, probably because the light is whiter. I was able to drive safely at night. I was not bothered by the dispersion of the light. Unfortunately, there was not enough of an energy saving effect that I could really feel.
Compared to when we replaced the LEDValve on our ZRX1100 a few years ago, low-cost products are now on the market, and the hurdle for replacement has gone down. If you are concerned about the brightness of your lights, we recommend replacing them with LEDs.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
It is easy to install.!
OEMHalogen was replaced because it was too dark.
Installation is a simple matter of removing and replacing the OEM. I did a test run during the daytime, and it was a little brighter in the Tunnel. I don't drive much at night, so no problem! I don't drive much at night, so no problem! I don't know about durability, but I'm happy with JAPAN, it's well made and looks good.
View detail
From Halogen to LED
The installation itself is easy, but it was very Large strange to fit it inside the Headlight.
Headlight floated and was very hard to close. I had to adjust the Wiring many times, and after pushing it in with a lot of effort, I couldn't close the Screw by myself and had to ask my family for help. I wonder if the Wiring I pushed in is Large sturdy… Spring was used as OEM.
View detail
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
Punching in as is
As per Title, it can be popped on as is.
Visibility from other vehicles, such as oncoming traffic, has increased, so I think safety performance has improved.
I don't know about durability so far.
View detail
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
No problems so far.
I just wanted to White the Light, so this cheap Valve is sufficient. View detail
Sure, it's bright, but...
Used for Cub Pro (JA10).
Installation, but Controller does not fit within Light.
It will be installed outside.
It was installed under the FrontBasket.
I ran it and it does indeed brighten up.
However, there is a mysterious light on the Left. This is for oncoming cars and people.
It is thought that it will be dazzling, so I put a Tape on the Headlight.
We made it harder to get out.
The brightness is good, but the light scatters, so that was Minus.
Caution should be exercised by those who are concerned about oncoming illusions.
View detail
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
Easy Pon-mount LEDs
LED bulbs are installed to make them more visible to other vehicles during commuting, especially at night. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Easy Pon-mount LEDs
It only takes about 15 minutes to install the LEDs, and it also reduces battery drain. View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
White light!
The LED Bulb can be attached to the bulb, as the name suggests, and the cosmetics are good. View detail
LED for Sphere LightMotorcycle
It is bright and nice for the price. I would buy it again next time. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Headlight LED
Installation was easy. It was brighter than I expected. View detail
Small work is required for installation.
We replaced the headlight with LED to cover the power consumption of electrical components in winter. I have not driven at night yet, so I do not know how much brighter the headlight is, but I could feel that it is much brighter during the daytime. The optical axis also seems to be large and strong.
The only thing to note is that the Controller and Coupler will not fit in the Bonneville 120 Headlight case.
I installed it on the Headlight BracketReverse side.
View detail
Transferred from Sphere
[How is it used?
It is used on MainMotorcycle's XJR1300C.
I used to use H4LED bulbs from Sphere Light, but after about 2 years of use, they stopped lighting up and...
When I took it apart, as you can see in the picture, the root part had been torn off due to heat.
The Seal appears to have become soft and brittle due to heat.
Was the one you received as per Image?
This is actually my second DAYTONA. I also used Sphere, but DAYTONA's quality of detail is better.
Was the installation difficult?
It is easy because it is the same as a normal Valve replacement.
How was your experience with it?
The brightness is perfect. I think it is brighter than Sphere.
but the optical axis was slightly gapped and needs to be adjusted.
By the way, the Sphere passed inspection.
[Included Parts:were they on?
Included Parts:Not available.
[Was there anything that disappointed you?
Not particularly
View detail
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
LED is still bright
We replaced Halogen with this product.
I feel that there are fewer opportunities to be forcibly interrupted at night than before.
View detail
bright
Halogen, I was dealing with, it is quite bright, Kojuk, Large was strange until I put it out! View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
It is easy to install.
The white light of LEDs feels bright.
It will probably have a long lifespan, so it will be cost effective.
Replacement was the same as a normal Valve replacement.
View detail
I wanted a little more brightness.
Brightness is still proportional to the Gold amount. View detail
I'm satisfied
Installation is easy, as all I have to do is replace it. I am satisfied with the amount of light. I am glad I made the change. View detail
Recommended over high efficiency Valve
It is installed on Vmax and TRX.
Vmax requires hang and force for installation, but can be pontooned.
There is a slight shadow under the illuminated area, but compared to the OEM Halogen bulb, it is not as bad as the OEM Halogen bulb. Lighten up." I feel. In fact, I bought it to reduce the burden on Battery rather than the brightness of Light.
I mounted it on the TRX and measured the brightness with an SLR and it was definitely brighter. (Illuminance seems to change with color temperature.)
Also, the brightness and light distribution will change from NORMAL Halogen depending on the shape of the reflector, the state of the plating, and the lense cut. Please be aware of this.
View detail