Reviews
Good
At first using this product, I thought the light was not very impressive, but no, this product has a high degree of perfection, light distribution in cos easy to see the road, wide field of vision, convenient light without glare, in general, the more I use it, the more I like it. next time i will use delta's higher end product ------------------------------------- --------------------- At first, using this product, I thought that the light was not very impressive, but this product did not have a high level of completion of the light allocation in cos easily visible the wide view of the light -eyed light, not the more dazzling, the more you like Next time I will use the more advanced product of Delta Powered by Google Translator View detail
Fine
Easy on the eyes. The specification states that 2 bulbs will give 3200/3600lumen brightness because one bulb only gives about 1800 lumens, this is very misleading I should have chosen your higher-end product ----- --------------------------------------------------- --- Thuan eyes are easy to see. Specifications specify 2 balls will give 3200/3600lumen brightness because one shadow only gives the brightness of about 1800 lumen, this is very easy to mislead I should choose your more advanced product. Powered by Google Translator View detail
Bright and white
RIZGIN2 is a fanless type LED headlight.
The bracket of the base is installed first, then the waterproof cap is installed, and then the body is inserted and attached as if it were hooked.
The controller is relatively small, and installation itself is easy.
Note that Cutline may not appear for LED Headlight depending on Lens/Reflector shape.
In the case of the MT-09, it seemed that the optical axis adjustment had to be set very low to pass inspection (depending on the chassis).
View detail
Fits: HONDA Super Cub 110 Pro, HONDA Ape 100, HONDA monkey, HONDA Zoomer X
This amount of light is reassuring.
I was so impressed with the brightness of the LED bulbs on another car that I decided to install them on my MOTRA.
Although it flickers when idling, it is bright enough to be reliable once the car is running.
The controller is a bit large and the wiring length is halfway, so it was a bit difficult to find a good installation position, but for this price, the Level is satisfactory.
View detail
Headlight replacement!
The OEM head lamps are perfectly fine, but I saw a friend's Motorcycle and thought they looked nice, so I replaced them.
I don't feel anything special in the morning or during the day, but about dusk to nighttime, it is much easier to see.
Replacement is also easy!
View detail
Used with BOLT Shoulder Bag. It seems to be Large sturdy enough for vehicle inspection.
Attached to BOLT Shoulder Bag.
Since this is a Valve only product, installation was easy.
After the replacement, I briefly checked the optical axis and found that the Large seemed to be strong, so I decided to drive it as it was.
It felt somewhat strange, so I asked for an optical axis adjustment at Shop.
My BOLT Shoulder Bag seems to have gapped a bit on the Right.
In that case, it seems that the focus is a bit wider when compared to NORMAL Halogen from Shop,
I was told that the car needs attention during the inspection.
However, I was assured that the light intensity will pass vehicle inspections without any problems, so I can use the product with confidence.
View detail
Used for DAX Headlight.
Full-wave rectification is used for DAX of DC Spec.
Before this LED Bulb, I used a slightly more expensive Sphere LED Bulb.
No difference is perceived in brightness, current consumption, etc.
This means that the cosmetics are very good.
It would be ideal for trial use.
Incidentally, the removed LED Bulb was installed in a BOLT Shoulder Bag and the optical axis was adjusted.
As a result, the light intensity, cutline, etc. were at a level sufficient to withstand vehicle inspections.
The appearance of the LED Bulb still seemed to have a reduced number of components.
The biggest difference is the weight. The feeling of holding it was totally different.
It comes with a one year warranty, so I'm sure it won't break during that time.
I expect it to last a long time.
View detail
GSX1100SY can be lit.
Head lamp was replaced as the car is about to be inspected.
Previous LEDHead lamps require a separate unit.
This product is complete on the Lamp and can be installed
The system is easy to clean and maintain.
When the optical axis was adjusted before the last inspection, the brightness was not bright enough.
The company told me that there were no balls available, so I bought a regular ball near the car inspection station.
We had a slapstick replacement work, so it was a good time for us to do it.
The inside of the Headlight was also cleaned with
I will soon be making an 800 km round trip touring and subsequent vehicle inspection.
I will add my comments when I have finished.
View detail
Good visibility.
We chose 4500K because of its longer wavelength and better visibility than 6000K. The power consumption has been lowered from Halogen, and the out-of-ball warning light has remained on. We are considering the need to incorporate a warning light canceller in the future. View detail
Expect high quality and durability
The previous God of thundergu passed away after 6 years, so we replaced it with its successor, the God of thundergu II New Model.
I used Halogen bulbs until the product arrived, but they felt dark at night.
We did not consider other products because we had already confirmed that the previous God of thundergu could be installed without modification and that the optical axis would be produced.
I am a little concerned that the price of II's New Model is set much lower, but I expect it to be as durable as the previous model.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Bright!
The Halogen bulb was no longer working, so I decided to replace it anyway!
I had previously purchased an LED that claimed to be an "explosive light" on the Internet, but it was the exact opposite, being darker than the original and thus useless, so I wondered if this would be the same. I was a little bit nervous about purchasing it and installed it with Tokyo Do Reflector Light and some modifications, but I am happy to say that it is bright and has perfect visibility!
However, I need to note that the OEMGlass Lens Light of the old CUB I tried is not able to secure the Stroke of the LED Lamp - so I need to be careful!
View detail
Easy exchange only!
It is the same shape as the H4 bulbs, so it is just a matter of replacing them.
Light intensity, light distribution, and tint are good.
I can rest assured that the car will pass inspection.
And what about durability?
View detail
Same handling as NORMALH4 sphere
It is the same shape as the H4 bulbs, so it is just a matter of replacing them.
Light intensity, light distribution, and tint are all good.
The car passes inspection and can be used with no problems at all.
Now we just need to know how durable it is.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
The total length is long, so make sure to check in advance.
[How is it used?
The Headlight Bulb of the LITTLE CUB that was given to me was out of order, so I searched for a replacement bulb to brighten it up.
Was the one you received as per Image?
A little longer overall than I thought?" I felt that the LDE sphere is like that?
The product was generally in line with the Image.
How was your experience with it?
I immediately replaced the OEM bulbs and PonLEDs that had gone black due to bulb failure and checked the headlight from the front, and found that it was close to the lens side of the headlight (not hitting the Lens, but the Clearance was about 5mm).
I did the work without checking the Instruction Manual & notes on the back of the Package due to my bad habit, but the back of the Package has a *Not available for MONKEY, APE, and SUPER CUBSeries. (Electrically not compatible with FI (Injection) Spec. cars of these models. (Also, carburetor spec. cars cannot be installed due to their dimensions. It was firmly stated.
LITTLE CUB is Material:I wonder if it was possible to install the plastic Lens because it is thinner than the old SUPER CUB's Glass Lens. However, there is a possibility that the heat generated by the LED bulb may affect the Lens, so we would like to monitor the progress at our own risk (likewise, those who install the Lens should do so at their own risk).
I started the engine and checked the light...it was so bright that I felt sorry to compare it to the OEM (the battery is completely dead, so there is a slight flicker at low rpm...) I am looking forward to driving after the Restore.
[Points to note]
As mentioned above, there are some car models that cannot be installed (for electrical or physical reasons), so do not purchase without thinking, as I did, and make sure to confirm the installation beforehand.
How did it compare to other products?
As for the CUB, I only know the OEM Headlight Bulb and the PonLED (and the PonLED was cheaper than the P7noHalogen bulb), so I can't say too much about the large size, but it is wonderfully bright compared to the OEM lantern light.
However, I will have to continue to check the LEDs in the future, as they sometimes make it harder for my old eyes to see what is in front of me in the rain.
Other items that would be helpful
Point and hang of installation
No difficult wiring etc., and can be installed in the reverse order of how the OEM bulbs were removed.
Large is strong, and it's not difficult.
[ITEMS TO BUY TOGETHER
If you only need to replace the Headlight Bulb, this product alone is Large sturdy (you will need the right tools for the job), but if you also want to replace the Blinker and Dale, you should also purchase products that meet your requirements.
[Opinions and requests to Manufacturer
When it comes to Motorcycle light bulbs, I trust Mats Stripe.
View detail
4500K but closer to White
I bought it to replace the OEMH4Halogen, but it is a ClassicCafe racer style.
Too bright for ContinentalGT650 but the color is too White.
I dare you to use 4300K for your car's fog, but if you buy it with the +200K feeling...
It means that it was White. The visibility has increased and the current consumption has decreased.
Good
Too bad the people who choose to buy 4500K are the ones who are looking for a light bulb color.
View detail
Bright and safe
I use it on a GSX1300R HAYABUSA 08 High beam.
I introduced it because of the limitations of Halogen in NORMAL.
Dramatic change in brightness when driving at night, allowing you to drive with peace of mind.
View detail
Fits: SUZUKI GEMMA 125, SUZUKI TS200R, SUZUKI TS125, SUZUKI DF200E, SUZUKI GS125E, SUZUKI STREET MAGIC 110, SUZUKI TS50 HUSTLER, SUZUKI STREET MAGICS, SUZUKI STREET MAGIC, KAWASAKI Z250FT, KAWASAKI KL250R, KAWASAKI KLR250, KAWASAKI KMX200, KAWASAKI Z200, HONDA XRBAJA, KAWASAKI KMX125, HONDA REBEL, HONDA XL250R, HONDA XLR250R, HONDA FTR250
DR250S requires modification (rmx250 too?)
I found a ph8 ledValve from Pine Stripe and bought it for my DR250s.
I was wondering if I could just snap it on since I saw the same Headlight rmx in the "Compatible Car Models" column, but the product length is too long and the Valve does not go all the way into the back. It seems that I have to cut it down quite a bit. （I thought I could just pop it on, but it's too long and the valve won't go all the way in.)
I wish the ph-8Valve had been designed to be a little more compact since it is often used in off-road vehicles…
View detail
Fits: Others H4 Valve,HS1Valve DC12V lighting Minus common car
Like others, I can't get High beam in 6 months.
The company's HID (55w) and a fan of Halogen for many years. In that vein, I purchased the company's LEDs, which are more expensive but have higher Quality and self-satisfaction
Installation.
Note that the screw for attaching the heat sink of the ribbon is small and easily licked.
Ribbon is deformable to some extent, so if the volume is contained, it will be contained.
Controller and Ribbon are quite Large.
Wiring is thick and does not bend tight.
when using
For brightness, Kelvin is terrifically satisfied.
High beam is about 6 months old, and then it stops lighting up.
Low beam also disappeared after about 200 hours total!
I'm an amateur so I don't know what broke, but it's disappointing because I was hoping for a more durable life than HIDs.
View detail
Brighter than expected. But ProjectorLamp needs attention.
I installed it while adjusting the angle of the pedestal & heat sink after carefully reading the instruction manual. The light is as bright as the low AbsoluteHID. I installed it as specified in the instruction manual, but the light is Heart type, but it illuminates where I want to see in Curve at night, so I think it is OK.
There are some points to note when installing the H9/H11:The Valve must be inserted and rotated to fix it in place. If the base and heat sink adjustment screws are not tightened, the valve will spin inside and will not be removed, and the entire light case will have to be replaced.
Well, 35W was brighter than I expected, so I can replace the low if I like using it.
View detail
Fits: HONDA GYRO CANOPY, HONDA Byte, HONDA MAGNA50, HONDA BENLY50CD50, HONDA ZOOMER, HONDA DREAM50, HONDA ZOOMERX
Hmmm... It's so expensive.
Used for square eye CUB90Custom HA02-180 units.
Replacement for Halogen 30/30W from Pine Stripe. (Light lens is OEM)
It is very easy to use.
The result was, hmmm. Did it lighten up a bit? Did it just get WHITER?
Perhaps it is because the bulbs were replaced with Halogen bulbs rather than white bulbs, but I don't feel a dramatic brightness.
This is to be expected, but I can't see well on wet surfaces, I have to check Switch to see if Light is on.
After all, 6000Kelvin is too WHITE for this level of brightness.
The worst part is light distribution.
If it is illuminated in a fan shape, there is no problem, but it is an inverted V cut~state. It is hard to see pedestrians on the dark night road.
In addition, the center of the image is blurry and dark, and the vision is lacking. It is likely to catch feces or frogs on the country road.
The Up eye is almost unusable.
The low simultaneous light system is not a light system, so it only illuminates the top and may attract cats and dogs.
It's a shame that it even comes with a 2-year warranty.
View detail