Reviews
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Headlight LED
Installation was easy. It was brighter than I expected. View detail
Small work is required for installation.
We replaced the headlight with LED to cover the power consumption of electrical components in winter. I have not driven at night yet, so I do not know how much brighter the headlight is, but I could feel that it is much brighter during the daytime. The optical axis also seems to be large and strong.
The only thing to note is that the Controller and Coupler will not fit in the Bonneville 120 Headlight case.
I installed it on the Headlight BracketReverse side.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Low cost Low Bright
To be honest, the brightness is not enough at all. However, if you want a LED light that shines white, this product is a good choice because of its low price and easy installation. If you need brightness for touring, this product is not reliable. It will be difficult to drive at night in places with poor street lighting, especially in bad weather. Especially in bad weather. But it is cheap! Easy installation is excellent. View detail
Both High low of Type 2 GSX1300R HAYABUSA are replaced.
Previous Spec. is NORMAL for High beam.
Low beam is HID55W made by 88House.
The high beam was too dark to pass the inspection, so we replaced both the high and low beams with LEDs.
result
The high beam passed the inspection with ease, but the low beam is too dark to drive at night.
I think it is brighter than NORMAL, but I felt it was too dark for my experience with HID 55W.
In the near future, we will switch back to HID only for Low beam.
View detail
Transferred from Sphere
[How is it used?
It is used on MainMotorcycle's XJR1300C.
I used to use H4LED bulbs from Sphere Light, but after about 2 years of use, they stopped lighting up and...
When I took it apart, as you can see in the picture, the root part had been torn off due to heat.
The Seal appears to have become soft and brittle due to heat.
Was the one you received as per Image?
This is actually my second DAYTONA. I also used Sphere, but DAYTONA's quality of detail is better.
Was the installation difficult?
It is easy because it is the same as a normal Valve replacement.
How was your experience with it?
The brightness is perfect. I think it is brighter than Sphere.
but the optical axis was slightly gapped and needs to be adjusted.
By the way, the Sphere passed inspection.
[Included Parts:were they on?
Included Parts:Not available.
[Was there anything that disappointed you?
Not particularly
View detail
Fits: HONDA DIO FIT, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA YV50 Z II, YAMAHA JOGREMOTE CONTROLLER, YAMAHA Axis Treat125, SUZUKI ZZ, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI LETS II, SUZUKI LETS IIL, SUZUKI LETS IICombination brakes, YAMAHA JOG, YAMAHA JOG Zr, YAMAHA JOGDX, YAMAHA JOGPetit, YAMAHA MATE50, YAMAHA MATE50D
LED is still bright
We replaced Halogen with this product.
I feel that there are fewer opportunities to be forcibly interrupted at night than before.
View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
The LED light bulb brightness and projection angle
I bought two M&H Matsushima led headlight bulbs for my 2014 HONDA MSX125 and got them installed. The brightness is less than that of OEM bulb. Horizontal projection angle is not wide enough, so I got back to the OEM bulb. Sorry. I do not recommend this bulb and gives two stars for the overall rating. View detail
Fits: その他 12V car
It's dark
Not enough illumination. From a fellow who went Touring with me. "can not see" It was pointed out to me that this is not a problem at night. I think it is fine at night, but in good weather during the daytime, visibility is insufficient. I have a Blinker lens. [Color] I think some of them are in Smoke, so I decided to use ??2. By the way, the Right Side of the image is our product. I thought it was dangerous, so I bought brighter LEDs. (Left Side) View detail
Brighter than expected
Cutline is out and both low and high are brighter than I expected.
It is fanless and Space on the Coupler side is the same as H4 Valve and can be used in narrow vehicles. Heat is reasonable.
I don't know how durable it will be, since I have only been using it for about two weeks, but I hope it will last for two years without breaking a single piece.
View detail
bright
Halogen, I was dealing with, it is quite bright, Kojuk, Large was strange until I put it out! View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
It is easy to install.
The white light of LEDs feels bright.
It will probably have a long lifespan, so it will be cost effective.
Replacement was the same as a normal Valve replacement.
View detail
It is safe on night roads.
The standard was Valve by Filament, which was too dark, so I replaced it about the same time I bought it.
It brightened up at once. This is great.
If your main lights are dark with Halogen or Filament valve, please convert them to LED.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Used on a 50cc 2Cycle moped. Quite bright!
I originally used M&H Mats Stripe Halogen bulb 12V35/30W Clear, which was brighter than OEM, but still old mopeds are still dark.
Since I use them for commuting, I decided to use LEDs for safety reasons.
Installation can be done simply by removing the headlight cowl.
The color is a beautiful White and the brightness feels 1.3 to 1.5 times brighter.
The white color is more like a recent vehicle than the yellow color, which makes it a better parenthesis.
I think it is a good cosmetic product because it is inexpensive and made by Mats Stripe, which is a reliable company!
I use it on my AF35LIVE DIOZX, but the Valve is PH7 because I replaced the Headlight with an external one.
View detail
I wanted a little more brightness.
Brightness is still proportional to the Gold amount. View detail
This makes nighttime driving safer.
The headlight of the CUB (JA07), which was dim, is now super bright. It is wonderful!
But it was difficult to install and I asked Shop to do it.
View detail
Safe on dark night streets
I chose this product because it has a good reputation and is compatible with AC power, even though it is a bit more expensive than the cheap Chinese products. The WR155R has a harness under the meter that is in the way and it was very difficult to fit the light unit. I think the degree of difficulty will vary depending on the car model. It is not very bright, but I can now do night runs normally, which I was afraid of in NORMAL. View detail
I'm satisfied
Installation is easy, as all I have to do is replace it. I am satisfied with the amount of light. I am glad I made the change. View detail
Yellow color is too strong.
Color is "Color:I was expecting a slightly yellowish color like a light bulb, but when I put it on, it was a bright yellow color.
The product itself is very good.
View detail
I also put it in SEROW250.
Vmax and TRX were good, so I put them in SEROW.
My first impression is bright!
But you get used to it.
The light distribution is wider than Halogen.
I did a test run to adjust the optical axis, and it seems to be the same as with Halogen.
It might be better to lower it slightly, but since it was not Passing, it is probably Large sturdy.
SEROW was the most obvious change after switching to LED.
TRX is originally bright, good light distribution,
Vmax is too dark to begin with, too old design,
SEROW is blah, blah, blah, bright but blah.
It's a combination or compatibility.
Good to change it.Recommendation.
View detail