Reviews
Fits: YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR450F
It doesn't fit
It is not compatible with YZ250FX2023MODEL, though it is compatible with YZ250FX2023MODEL.
I have removed the NORMAL White Ring as per the instruction manual, but it is not attached.
View detail
Brilliant, quick delivery
Fast order quick delivery , top quality product I have made another order already . I've ordered a seat for my bike and currently look to purchase other parts ,very good View detail
It is a must for older Motorcycles.
For older Motorcycles, it is a must.
The easy installation and low price are highly appreciated.
View detail
Filter part is pricey
If you want to put a Filter between the Fuel lines, it is difficult to bend the Hose if it is short, but if it is angled like this product, it will be neat. View detail
It is a must for older Motorcycles.
The device was installed on a KDX250SR.
Since it is an old Motorcycle, it is ideal for Tank's Rust defense.
View detail
Used to supply Gasoline as a startup check
Installed between the connection from a simple Gasoline container to Carburetor to prevent CarburetorOverflow.
Effective without CarburetorOverflow after adding Filter.
View detail
The fuel line is bent 90-degrees and a filter is installed! Large capacity and low resistance!
I bought a battered 900SS (900SL) and am Restore.
DUCATI features a fuel pump and fuel fliter built into the Tank, and there is no pump or filter beyond the Tank's Fuel Cock.
But I don't like this configuration...
The reason I don't like the Fuel fliter built into the Tank is that it looks Refreshing, but I can't see how dirty the Filter is at all.
It is a huge Large Filter and rarely gets stuck, but you can't be in a situation where Garbage is piling up and not know it.
Therefore, I wanted to remove the Filter built into the Tank during Restore and set up a Filter outside the Tank.
I have a front and rear independent carburetor spec. (and both front and rear are down draft, which is a special spec.), which makes it very difficult to handle the fuel lines.
The result was Large success.
We succeeded in bending the Gasoline piping 90° as desired because we installed it independently just before the Carburetor, and the Gasoline piping came together very nicely.
Filter capacity will be less than OEM's Giant LargeFilter, so Quantity to avoid flow resistance.:2pc. Set installation is also in line with the goal.
It also has a built-in Magnet, which OEMFilter does not have, so no complaints.
Transparent Material:Since it is plastic, its durability is a mystery, but it does not feel like it is made of a particularly inferior material, so it probably won't be a problem.
This is a Recommendation!
View detail
periodic replacement
I installed it to prevent foreign matter from entering the tank, and it is about time for regular replacement. The price is not that much, I can see how dirty it is, and it is easy to replace, so I think it is easy to use. View detail
Feeling flow instability as per other impressions.
I use it because I often Overflow on my old car.
I'm not particularly particular about the Manufacturer, but DAYTONA seems to be well worth the price. There are no visible defects, such as paper wrinkling.
However, as mentioned in other impressions, the flow rate seems to be lower than other companies' products, and sometimes the Gasoline would run out at full throttle on the freeway scene, etc. (Waiting a bit will fix it.) Also, the Gasoline would suddenly stop running due to air bite, although the cause was unknown (I'm not sure if this was due to the Direct product, but removing the filter would fix it). (I don't know if this was due to the Direct product, but it was fixed by removing the filter.)
Therefore, it is not very useful for 250ccSports type motorbike.
I will look for a product with a higher flow rate.
View detail
I would like to make Carburetor a Large thing.
I put it on after purchasing a slightly more expensive Carburetor to prevent Rust and Garbage from getting into the Fuel Tank. The price is reasonable and it is well made and this is the third time I have purchased this product. View detail
It's an old Motorcycle.
It is an old motorcycle so I installed it as a precaution. View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
In reserve.
I think it is good that the length is adjustable! View detail
You can see the inside of the Filter.
During some carburetor adjustments, I found a piece of a very Smallest Rubber? in the Float room. I did a lot of research and couldn't find the source so I decided to put a Filter on it.
This time, I decided to use a CUB, which has a matching hose bore diameter, small size, and light weight without magnet.
Bracketetetc. is not included, so you have to prepare it by yourself. Installation itself was easy and did not affect the surrounding lines even inside the Leg shield.
If you are attaching a Filter for the first time, you should be careful not to let the protruding part of the Bracket or Tie Wrap that you are attaching hit other Lines.
The product's mechanism is an orthodox mesh system:even when the Axel is opened by the governor, Gasoline passes through normally and the Engine does not cough.
The product appearance is also well finished.
The FilterBody shows the Manufacturer's name and the direction of fuel flow. The display is not sealetc., but a raised workpiece, which is good because seal can peel off or become dirty due to engine heat.
The product was securely packaged and sealed. I think this is necessary for products related to hazardous materials.
As a buyer, this is the kind of thing that makes me happy. In the past, an import from another Manufacturer purchased at another Site was sent to us just in a Vinyl bag.
Although the cause of this installation was not found in the end, it was found that it was not foreign matter from the fuel line by installing this product. I think another merit of this product is that you can see the inside of the transparent filter and mesh type to check for foreign substances.
View detail
Good quality item
The fuel filter keeps fuel running smoothly to the engine. Changing the fuel filter keeps the injectors clean longer, which means more power and better gas mileage. Bring your car or truck to any of our stores for a fuel system cleaning to get the most power from your engine. -(high quality product) FOR PERFORMANCE USE View detail
8mm petrol filter COMPLETE
Good petrol filter with fine mesh inside.bulding quality good with thicker plastic. This is 8mm outer diameter hose outer connector. View detail
Petrol filter cartridge
This is petrol filter with outer diameter 6.5mm. good quality including stanless steel filter mesh inside. Recommended View detail
L-Type is selected depending on handling conditions
The Straight Type was being used, but the hose was being loaded at the filter mounting point, and vibration caused it to crack, from which the gasoline leaked out.
Depending on the handling situation of the hose, we have to select the right shape to avoid loading.
It could cause a fire.
For my Motorcycle, this L-Type was the right choice.
The filter is fine and good.
View detail
It is made by KIJIMA, so it is better than nothing.
[How is it used?
Used for Af09.
Was the one you received as per Image?
Yes
How was your experience with it?
It is made by KIJIMA, so it is better than nothing.
[Points to note]
I would recommend checking the Φnumber of Hose before purchasing.
How did it compare to other products?
Variation is also abundant, so I thought it should be made by KIJIMA….
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Used for COLLEDA50
It has a Cup on it and you can see rust accumulating in the bottom, which is fun to see the effect. There are arrows engraved on the Body for the direction of fuel flow. the COLLEDA50 Hose has a 5mm inner diameter, but it felt just right. This Filter is disposable, so I ordered the next one. if you have Space, I recommend it because of its effective shape. View detail
Essential equipment for older vehicles
After riding for a long time, the cold temperature difference causes condensation inside the Tank, resulting in water droplets.
Water will collect on the bottom of the Tank and may rust.
Rust debris can enter the carburetor, causing overflow and clogging of the jets.
This is where this product is useful.
If there is some rust, the filter can trap it, and since it is visible through the filter, it is possible to notice rust as soon as possible and take measures such as rust removal.
This product is compatible with φ6 and 8 and can be used from Mini bike to Large type.
View detail