Reviews
Reliable Filter
I bought it two years ago and this is the second time. It was not badly stained,
Replaced to prevent carburetor clogging.
It has magnets on it so it will remove rust, etc.
View detail
I put it on as a spare.
External Fuel filter attached to ESTRELLA.
It has been immobile for a while, and you can often find a little bit of age-related deterioration in various parts of the car. 。
There does not appear to be any fuel seepage, especially in the Fuel Cock area, but there is no denying that the Fuel Cock has deteriorated over time.
The other day, I was worried about the rust in the fuel tank, and although I have removed rust to prevent impurities from entering Gasoline, I am not sure about it, so I will install an additional external type of fuel filter.
Fuel filter
A filter device used in automobiles to filter fine impurities contained in fuel.
It is used for the purpose of removing water, sand, and dust mixed in during refueling, etc., and maintaining sufficient fuel efficiency.
There seems to be a time for replacement, though not up to the air filter.
■ 50,000 km at Carburetor Vehicles
■Injection car with 100,000 km
■Diesel car with 50,000 km
is the standard.
Continued use of the filter past its replacement time will not only clog the fuel filter element and cause a lack of engine output, but will also cause the filter to lose its original function of capturing foreign matter and separating moisture.
[When the fuel filter clogs.
‥
Idling of ▲Engine is unstable.
Engine seems to stop when driving.
▲ Suddenly, Engine stopped spewing.
Failure to start = Engine will not start.
I haven't experienced the clogging of the Filter yet, but considering the distance and age, it should be replaced. 。
In my 90's ESTRELLA, the fuel filter is integrated with the fuel cock and inserted into the tank. That is not so bad, but I wanted to be sure.
I also added an external Type as a spare.
I chose KIJIMA's because it was inexpensive and I had used it before.
The deciding factor was the transparency, which makes it easy to see dirt.
Replacement procedure.
(1) Fuel Cock is turned off
↓
(2) To be sure, Gasoline in the carburetor should also be removed.
↓
(3) Interrupt the fuel filter between the rubber hose connecting the fuel cock and the carburetor.
It is wise to prepare Oil Resistant Hose separately because OEM Hose is not long enough.
↓
(4) Turn on Cook and apply Engine.
Operation check.
Fuel Cock flows by Engine pressure.
after replacement
No problems
They seem to be getting rid of the impurities for sure.
Durability...? I think Large is durable because it is inexpensive and will be replaced with a con stunt.
It is a good idea to have insurance on older Motorcycles.
Installation is also easy.
View detail
Used for MC19 CBR250R
Same standard as OEM, so no problems with installation or performance. View detail
Brilliant, quick delivery
Fast order quick delivery , top quality product I have made another order already . I've ordered a seat for my bike and currently look to purchase other parts ,very good View detail
It is a must for older Motorcycles.
For older Motorcycles, it is a must.
The easy installation and low price are highly appreciated.
View detail
It is a must for older Motorcycles.
The device was installed on a KDX250SR.
Since it is an old Motorcycle, it is ideal for Tank's Rust defense.
View detail
Used to supply Gasoline as a startup check
Installed between the connection from a simple Gasoline container to Carburetor to prevent CarburetorOverflow.
Effective without CarburetorOverflow after adding Filter.
View detail
The fuel line is bent 90-degrees and a filter is installed! Large capacity and low resistance!
I bought a battered 900SS (900SL) and am Restore.
DUCATI features a fuel pump and fuel fliter built into the Tank, and there is no pump or filter beyond the Tank's Fuel Cock.
But I don't like this configuration...
The reason I don't like the Fuel fliter built into the Tank is that it looks Refreshing, but I can't see how dirty the Filter is at all.
It is a huge Large Filter and rarely gets stuck, but you can't be in a situation where Garbage is piling up and not know it.
Therefore, I wanted to remove the Filter built into the Tank during Restore and set up a Filter outside the Tank.
I have a front and rear independent carburetor spec. (and both front and rear are down draft, which is a special spec.), which makes it very difficult to handle the fuel lines.
The result was Large success.
We succeeded in bending the Gasoline piping 90° as desired because we installed it independently just before the Carburetor, and the Gasoline piping came together very nicely.
Filter capacity will be less than OEM's Giant LargeFilter, so Quantity to avoid flow resistance.:2pc. Set installation is also in line with the goal.
It also has a built-in Magnet, which OEMFilter does not have, so no complaints.
Transparent Material:Since it is plastic, its durability is a mystery, but it does not feel like it is made of a particularly inferior material, so it probably won't be a problem.
This is a Recommendation!
View detail
I would like to make Carburetor a Large thing.
I put it on after purchasing a slightly more expensive Carburetor to prevent Rust and Garbage from getting into the Fuel Tank. The price is reasonable and it is well made and this is the third time I have purchased this product. View detail
You can see the inside of the Filter.
During some carburetor adjustments, I found a piece of a very Smallest Rubber? in the Float room. I did a lot of research and couldn't find the source so I decided to put a Filter on it.
This time, I decided to use a CUB, which has a matching hose bore diameter, small size, and light weight without magnet.
Bracketetetc. is not included, so you have to prepare it by yourself. Installation itself was easy and did not affect the surrounding lines even inside the Leg shield.
If you are attaching a Filter for the first time, you should be careful not to let the protruding part of the Bracket or Tie Wrap that you are attaching hit other Lines.
The product's mechanism is an orthodox mesh system:even when the Axel is opened by the governor, Gasoline passes through normally and the Engine does not cough.
The product appearance is also well finished.
The FilterBody shows the Manufacturer's name and the direction of fuel flow. The display is not sealetc., but a raised workpiece, which is good because seal can peel off or become dirty due to engine heat.
The product was securely packaged and sealed. I think this is necessary for products related to hazardous materials.
As a buyer, this is the kind of thing that makes me happy. In the past, an import from another Manufacturer purchased at another Site was sent to us just in a Vinyl bag.
Although the cause of this installation was not found in the end, it was found that it was not foreign matter from the fuel line by installing this product. I think another merit of this product is that you can see the inside of the transparent filter and mesh type to check for foreign substances.
View detail
Good quality item
The fuel filter keeps fuel running smoothly to the engine. Changing the fuel filter keeps the injectors clean longer, which means more power and better gas mileage. Bring your car or truck to any of our stores for a fuel system cleaning to get the most power from your engine. -(high quality product) FOR PERFORMANCE USE View detail
8mm petrol filter COMPLETE
Good petrol filter with fine mesh inside.bulding quality good with thicker plastic. This is 8mm outer diameter hose outer connector. View detail
Petrol filter cartridge
This is petrol filter with outer diameter 6.5mm. good quality including stanless steel filter mesh inside. Recommended View detail
L-Type is selected depending on handling conditions
The Straight Type was being used, but the hose was being loaded at the filter mounting point, and vibration caused it to crack, from which the gasoline leaked out.
Depending on the handling situation of the hose, we have to select the right shape to avoid loading.
It could cause a fire.
For my Motorcycle, this L-Type was the right choice.
The filter is fine and good.
View detail
Used for COLLEDA50
It has a Cup on it and you can see rust accumulating in the bottom, which is fun to see the effect. There are arrows engraved on the Body for the direction of fuel flow. the COLLEDA50 Hose has a 5mm inner diameter, but it felt just right. This Filter is disposable, so I ordered the next one. if you have Space, I recommend it because of its effective shape. View detail
Essential equipment for older vehicles
After riding for a long time, the cold temperature difference causes condensation inside the Tank, resulting in water droplets.
Water will collect on the bottom of the Tank and may rust.
Rust debris can enter the carburetor, causing overflow and clogging of the jets.
This is where this product is useful.
If there is some rust, the filter can trap it, and since it is visible through the filter, it is possible to notice rust as soon as possible and take measures such as rust removal.
This product is compatible with φ6 and 8 and can be used from Mini bike to Large type.
View detail
It helped me in a tight spot.
I used it on a Yamaha '82 POPGAL that a friend of mine had requested for repair.
I removed the tank and put a tacho string through the nut and shook it well to remove the large rust, but it was difficult to remove the thin rust. I had a few filters on the parts shelf in the garage, but I couldn't install the cover because it was hard to get into the POPGAL's narrow frame gaber.
It is really easy to use, and without this Filter, I had to turn the fuel Pipe longer to keep it from kinking, which is a big help, and it seems to collect a little rust in the Tank, which is great, and the Filter is transparent so I can see it better and replace it when it gets dirty.
It would be helpful to have a product with a little more capacity.
View detail
Filter exchange
Easy to install and a good product. View detail
carburetor-friendly
Used for TACT CourregesA-AF09 in 1985.
My brother-in-law gave me a TACT almost 30 years after it was scrapped and I serviced it, but the inside of the tank was rusty. I cleaned it with Gasoline and wiped it down with Dustcloth, but I could not remove the fine rust.
The rust and garbage are removed very well, but I think I need to replace about 2 more tanks because there is a lot of rust on the tanks.
Installation takes less than 10 minutes because all you have to do is insert a spot between the tank's gas outlet and the carburetor's fueling port. It is recommended that you check the outer diameter of your car's gas cock and the space available for installation before purchasing the filter.
View detail
Fits: HONDA STEED (STEED), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA STEEDVLX (STEED), HONDA STEEDVLX (STEED), HONDA STEED (STEED), HONDA STEEDVLS (STEED), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA CBR400R Limited Edition, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CB-1
Cospa best
The size feels the same as the OEM product, so I have no problem installing it. The price is much lower than the OEM Product, so I can recommend this product. View detail