Reviews
Large satisfaction, I should have changed it earlier.
I have tried various levers from brembo OEM, but this one fits me the best, including one for Clutch SideRCS.
When I inquired about the compatibility with my favorite XR0.11.71, I was told that it was not made by brembo, so I could not get an answer. I checked the description of ASite and found that RMCMASTER is available! I immediately bought it because the delivery date was earlier than this one.
View detail
Reliable Filter
I bought it two years ago and this is the second time. It was not badly stained,
Replaced to prevent carburetor clogging.
It has magnets on it so it will remove rust, etc.
View detail
Easy upgrade
This item is high quality and is very easy to fit. Its a must to get rid of the restrictive stock air filter with a small surface area and this is a easy cost effective solution. Very well made and low maintenance View detail
Fits: KAWASAKI ZX-14, KAWASAKI ZX-14R, KAWASAKI ZZR1400
I changed the look to a more modern look.
After 9 years of purchase, I changed the Blinker from Orange bulb to LED + Clear cover to match the LED + Clear cover of the Tail lamp. The price is a bit expensive at 10,000 yen, but it comes with Relay, so I guess that's about the same.
when Blinker is not attached. [Color] Clear is clean and Refreshing and I am satisfied with the aim.
ZX14R is very troublesome because the cowl has to be removed from both Front and Rear to replace the blinker valve, but I am used to this after installing other parts many times, so I can forgive it. (Plug replacement is the real work from here, and it is a very large change.)
It might be a bit challenging for someone removing Cowl for the first time?
It was worth the effort to replace it.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA
Color variations are great!
I was attracted to the fact that all three Parts can be specified in different colors, the length of the lever can be changed, and I had recently become fond of Speedra.
I don't know yet how it feels or how comfortable the grip is since I have only been able to ride it once since the replacement.
View detail
Fits: HONDA CB400SB VTEC Revo, HONDA CB400SF VTEC Revo, HONDA CB400SF VTEC, HONDA CBR900RR, HONDA CBR600F2/F3/F4/F4i PC25/PC35, HONDA CBR400R NC23, HONDA CB400SB VTCE REVO, HONDA CB400SF VTCE REVO, HONDA SHADOW400, HONDA SHADOW1100/1100Classic, HONDA VTR250, HONDA VT750S, HONDA VFR400R NC30, HONDA VT400S, HONDA RVF400 NC35 , HONDA NSR250, HONDA NC750X RC72, HONDA NC750S RC70, HONDA NC700X RC63, HONDA CBX400F
GOOD looking
Installation itself is very easy.
With Adjust so it can be adjusted to your grip.
I think it is a very flourishing Parts with good detailing.
View detail
It is a good item
Used for SUPER CUB 90 which was converted to Battery reply.
When waiting at a traffic light at an intersection, the blinker stops blinking when the headlight is turned on and the brake is applied,
Switching to this product helps because the Blinker blinks properly.
Simply remove the Tail lens and replace the Valve.
It is brighter than the Normal valve and eliminates Valve breakage, so there is one less cause for concern.
View detail
Tank was replaced and used.
Used for APE Tank replacement. [Color] It's not Clear, so it's OEM tone. View detail
Superb
incredibly fast delivery,only 4 working days to Lithuania. WOW! after changing the filter, the motorcycle really runs faster. thanks again Webike! View detail
A classic!
I wasn't unhappy with the feel of the OEMLever, but I didn't like the look of the Silver, so I replaced it!
It looks better and feels better, and the grip is more comfortable.
I am glad I replaced it!
View detail
I use it on my Yamaha TT250R.
I always asked for replacement at Motorcycle shop because I am not familiar with Machine,
I decided to do maintenance by myself once in a while and took on the challenge of replacing the air filter.
It was a reliable Yamaha OEM and shared with WR250.
Oil was also applied and was easy to replace.
I would purchase again.
View detail
Impeccable!
I chose a handlebar 100mm longer than the OEM one to replace the handlebar on my SR400. The movement is smooth and I like it! View detail
Fits: HONDA GB250 CLUBMAN, HONDA MVX250F
The texture and shape is so nice that you can hold the Lever all the time!
The adjustment range is quite large, which is convenient, and the large 1-Click angle makes it easy to see the effect. However, the furthest away is too far away to grip, and recently it is too close to full break or full clutch cut.
The color is very nice, I chose Titaniumium color for both Lever and Adjuster, and it matches the traditional atmosphere of GB250 CLUBMAN EXACTLY. I could have chosen a gorgeous color for the Adjuster with Accent, but I think it would have floated around the Handlebar of GB250 CLUBMAN, so I am glad that I chose the same color.
Once, Side Stand didn't go down to the end and I tipped it over, but thanks to Foldable, the lever didn't break! (Lol)
I am satisfied with the WW because the reversible function worked perfectly.
View detail
I put it on as a spare.
External Fuel filter attached to ESTRELLA.
It has been immobile for a while, and you can often find a little bit of age-related deterioration in various parts of the car. 。
There does not appear to be any fuel seepage, especially in the Fuel Cock area, but there is no denying that the Fuel Cock has deteriorated over time.
The other day, I was worried about the rust in the fuel tank, and although I have removed rust to prevent impurities from entering Gasoline, I am not sure about it, so I will install an additional external type of fuel filter.
Fuel filter
A filter device used in automobiles to filter fine impurities contained in fuel.
It is used for the purpose of removing water, sand, and dust mixed in during refueling, etc., and maintaining sufficient fuel efficiency.
There seems to be a time for replacement, though not up to the air filter.
■ 50,000 km at Carburetor Vehicles
■Injection car with 100,000 km
■Diesel car with 50,000 km
is the standard.
Continued use of the filter past its replacement time will not only clog the fuel filter element and cause a lack of engine output, but will also cause the filter to lose its original function of capturing foreign matter and separating moisture.
[When the fuel filter clogs.
‥
Idling of ▲Engine is unstable.
Engine seems to stop when driving.
▲ Suddenly, Engine stopped spewing.
Failure to start = Engine will not start.
I haven't experienced the clogging of the Filter yet, but considering the distance and age, it should be replaced. 。
In my 90's ESTRELLA, the fuel filter is integrated with the fuel cock and inserted into the tank. That is not so bad, but I wanted to be sure.
I also added an external Type as a spare.
I chose KIJIMA's because it was inexpensive and I had used it before.
The deciding factor was the transparency, which makes it easy to see dirt.
Replacement procedure.
(1) Fuel Cock is turned off
↓
(2) To be sure, Gasoline in the carburetor should also be removed.
↓
(3) Interrupt the fuel filter between the rubber hose connecting the fuel cock and the carburetor.
It is wise to prepare Oil Resistant Hose separately because OEM Hose is not long enough.
↓
(4) Turn on Cook and apply Engine.
Operation check.
Fuel Cock flows by Engine pressure.
after replacement
No problems
They seem to be getting rid of the impurities for sure.
Durability...? I think Large is durable because it is inexpensive and will be replaced with a con stunt.
It is a good idea to have insurance on older Motorcycles.
Installation is also easy.
View detail
Used for MC19 CBR250R
Same standard as OEM, so no problems with installation or performance. View detail
air access
The package was received in excellent condition and in addition to all the contents being well protected, the item did not suffer any type of damage, and was also delivered on the exact date indicated at the time of making the purchase. View detail
I am satisfied with the limited
I am grateful to still be able to purchase this product as it is an older Motorcycle and parts are limited. View detail
Attached to Glass Lens with Cut
I put it on my old CIBIE CutGlass Lens, which is 4500K, but it is not too white, which is good. I heard that cheap lenses may scatter light because they are old, but this was not the case, and it became brighter anyway. View detail
Explosive light, but not compatible with Off-roadFender
H4 Valve replacement Type, so replacement is easy.
Valve size is the same as Halogen bulbs, so there is no need to worry about replacement work.
After installation, the impression is bright! Super bright! It's super bright!
It also reduces power consumption, which is essential for TRAIL vehicles that turn the Cell many times on forest roads.
It may be due to the brightness, but it seems as if the light is diffusely reflected upward by the Fender.
I think it may be due to the Decal, but there is more light in the upward direction, which cannot be managed by optical axis adjustment.
Not enough to adversely affect oncoming traffic, but enough to require a little care in making adjustments after installation.
View detail
Ideal for Wiring processing of homemade Parts!
I used it for the Wiring process of my own ShiftIndicator, and I strongly RECOMMEND using Protective Tubes like this one, as Wiring looks and durability sucks when left bare! I'm glad I bought it because it has withstood rain and UV rays for almost a year and is very durable! View detail