Reviews
Feeling of security
I always had a hard time hanging the Maintenance Stand on the Swing Arm, but by fixing the front tire to the ClampSTAND, the stability is increased and the Maintenance Stand can be used with ease. View detail
Reliable Brand
There are less expensive products for the same purpose, but if you want to use them for a long time, the Manufacturer here is Recommendation.
A Hook to hang the removed Brake Caliper is also included, which is very convenient.
View detail
Fits: HONDA NSR80, HONDA NSR50, HONDA NSF100, HONDA NSR80, HONDA NSR50, HONDA NSF100
Used in NSF100
It can be used at Circuit or at home for small tasks.
I am using it on a NSF100 and it is easy to use and does not interfere with the OEMCowl.
One note of caution.
The Adapter is inserted from the bottom of the steering stem. If the Adapter is not firmly inserted all the way to the base, it will interfere with the Cowl.
Especially when you are not used to it, it takes a lot of time to insert the Adapter firmly into the root.
View detail
I bought it for Race
[How is it used?
I used it to put on Tire warmer at Circuit.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
It is very easy to install and remove, so it is very useful in Circuit!
[Points to note]
Can be installed on any commercial vehicle body.
View detail
Purchased for ADV160, CROSSCUB110 and WR125R
I bought this for ADV160, CROSSCUB110 and WR125R because StemType STAND is not available.
The quality and usability are good, and the price is lower than other products.
View detail
Suitable for any type of car
Anyway, it's easy and convenient!
There are several different thicknesses of Head.
It is basically applicable to any type of car!
Cheaper than J something and perfect quality.
View detail
Feeling of security
I feel safe.
The actual use of the product is a definite product
View detail
J-TRIP J-Trip JTrip Front stand20
The Race ish look and feel is increased, and practicality, such as maintenance, is also normally improved. View detail
Definite shopping
Stable J-TRIP.
Impeccable.
View detail
During car wash and wheel maintenance
It is designed for mini bikes, but the stem hole diameter is suitable, so I used it on the MT-10. Naturally, the Rear is supported by the maintenance stand. It takes a lot of force to raise it, but it works. However, it is not suitable for maintenance that requires a lot of force because it tends to wobble. In that case, it is definitely more stable to use a normal front stand.
Also, if the foot hangs at an angle halfway, the STAND of the Rear may gap.
View detail
Easier than Rear stand.
Rear and Quantity:I purchased a set and just pop it in the hole in the back of the Stem. The size of the hole is different depending on the motorcycle, so there are various materials:It has an Aluminum collar.Pull down the Lever and it lifts up easily. It is easier than FOR Rear. But Small Motorcycle:Z900RS CAFE has already installed DOREMI COLLECTION front emblem, so I think it has a lot of load on it, I have given up on it as it can't be helped. If it cracks someday, I will repurchase it. I have no complaints about the front stand. View detail
Very lightweight
This is a very lightweight STAND. Originally, we were using a STAND made by another company, but it was heavy and a little inconvenient when carrying it or loading it on the transporter. The Battle factory STAND we purchased this time is very lightweight and can be carried easily with one hand. The feel of the STAND is not a particular problem, but it is a little less rigid than the steel ones made by other companies, but I thought that was a trade-off with the lightness.:I like it because it is Stainless Steel and looks very Parenthesis. The bosses are set up differently for each car model, so you should be aware of that when purchasing. I highly recommend this product and I am very satisfied with it. View detail
This is good, really easy to work around the front wheels. I also like that it is reasonably priced.
Up to now, when cleaning the front wheel area, the Pantograph jack of for Vehicle was diverted and used, but now it is used with the Quantity:Pair (for Left and Right) I was finding it very tedious to synchronize the On the other hand, I have not been able to get my hands on a front stand. This time, I wandered through Webig's homepage, and this product caught my eye because it was relatively inexpensive and would not take up much storage space when not in use, so I ordered it.
The main usages are as follows.
Product condition:beautifully packaged and without a scratch, the product weight is easy to hold in one hand with ease.
Dimension adjustment:Quantity:Pair (for Left and Right) The screws on both the top and bottom are simply loosened, adjusted to the appropriate dimensions, and then re-tightened.
Removal and installation:Simply raise and lower the handles to align them with the lower part of the front fork.
Storage:When not in use, it can be placed in a corner of a shed, so it does not require much space.
The troublesome work up to now seemed to be a lie, and I was keenly aware once again of the convenience, ease, and power of the special tool. I wish I had purchased it earlier. The price is also very attractive.
View detail
Easy to use!
A must for touching around Front. View detail
This is a great front stand.
This is a great stand for the price.
This is my first time using a front stand. It wasn't difficult to use.
After inserting the adapter that fits your bike into the front hook, hook it on your bike and lift it up.
It's quite sturdy and supports the bike well.
However, care must be taken not to scratch the front fender when using it.
I used it for gsx r1000 and there was no problem using it.
I highly recommend it to others as well. -------------------------------------------------- -------- It is a great stand for the price. I'm the first to use the front stand. It was not difficult to use. Put the adapter that fits the bike in the front ring and put it on the bike. It is quite strong and supports the bike. However, you should be careful not to scratch the front fender when using it. I used it for the GSX R1000, but there was no problem. It is highly recommended for others. Powered by Google Translator
View detail
Unit B2510 front stem-up stand
Tried it on a 2006 cbr600rr. There's no interference with the cowl, but you can't mount it the way you want unless you remove the horn. It interferes with wheel extraction, but try adjusting the height. View detail
Fits: HONDA NSR Mini, HONDA NSR50, HONDA NSR50, HONDA NSF100, HONDA NSF100
Good quality
A little expensive but good quality. View detail
I was finally able to float the Front.
I had been wanting a Front stand for a long time, and after looking around, I found one at a reasonable price, so I snapped it up.
I also purchased a dedicated Adapter at the same time so I could Front up without any problems.
It is Steel, so the weight is reasonable, but I think it is also durable.
There is a concern that the paint may peel and rust where it comes in contact with the ground, but this is OK as long as it is used with care.
View detail
Easy, easy to lift
It is a little heavy, but can be lifted easily.
It can be folded so it takes up little space in the Transporter.
The stability is there, too.
View detail
I'm glad I was excited to buy it.
I was looking for a variety of STANDs for 10inch Tire size, because it would be easier to change the Large size if there is a steady STAND for lowering the Engine of the Scooter. I chose this STAND because there are not many STANDs available on the market that are compatible with 10-inch tires, and I was skeptical that I could use an inexpensive STAND without modification. I am satisfied with the Large size STAND because it has no problems with component accuracy and rigidity, and it supports the Scooter smoothly in and out, with almost no rattling or falling over. View detail