Reviews
lacking in stability
It lifts up, but while lifting it up, it shifted forward and fell off.
I'm glad I didn't remove the Tire.
I replaced it with a higher one to be raised by the same Manufacturer's Stem.
Maybe I was not using it properly, but I didn't understand it because it was not explained in detail.
Maybe people without knowledge should not use it.
View detail
I bought it for Race
[How is it used?
I used it to put on Tire warmer at Circuit.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
It is very easy to install and remove, so it is very useful in Circuit!
[Points to note]
Can be installed on any commercial vehicle body.
View detail
During car wash and wheel maintenance
It is designed for mini bikes, but the stem hole diameter is suitable, so I used it on the MT-10. Naturally, the Rear is supported by the maintenance stand. It takes a lot of force to raise it, but it works. However, it is not suitable for maintenance that requires a lot of force because it tends to wobble. In that case, it is definitely more stable to use a normal front stand.
Also, if the foot hangs at an angle halfway, the STAND of the Rear may gap.
View detail
Very lightweight
This is a very lightweight STAND. Originally, we were using a STAND made by another company, but it was heavy and a little inconvenient when carrying it or loading it on the transporter. The Battle factory STAND we purchased this time is very lightweight and can be carried easily with one hand. The feel of the STAND is not a particular problem, but it is a little less rigid than the steel ones made by other companies, but I thought that was a trade-off with the lightness.:I like it because it is Stainless Steel and looks very Parenthesis. The bosses are set up differently for each car model, so you should be aware of that when purchasing. I highly recommend this product and I am very satisfied with it. View detail
Fits: HONDA NSR Mini, HONDA NSR50, HONDA NSR50, HONDA NSF100, HONDA NSF100
Good quality
A little expensive but good quality. View detail
Easy, easy to lift
It is a little heavy, but can be lifted easily.
It can be folded so it takes up little space in the Transporter.
The stability is there, too.
View detail
Commercial groms can be used without problems!
I bought this for daily maintenance and to wrap the tire warmer at the circuit. At first I thought I would have to take the headlight off to use it, but I had no problem at all and was able to lift it easily. Moreover, it can be folded up when not in use, so it can be stored without taking up too much space.
It was an excellent product.
View detail
Easy to lift!
[How is it used?
Circuit
Was the one you received as per Image?
Street Image
How was your experience with it?
It is easy to raise by the principle of lever, and I think even women can raise it. These products should be well-made, not cheap.
[Points to note]
How did it compare to other products?
Good cost performance. It is safe because it is a car model-specific product.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Rear stand should be applied before use. Naturally…
View detail
I like that it's light and doesn't take up much space.
I have been using JTrip's STAND before and after for my 3.5 liter class, 250 class and NSF. It is very light due to the material. It also does not take up much space in the Transporter. However, I can't deny the instability while using it compared to JTrip's product mentioned above. That's why I gave it a Point4. I can't help it because of its shape. It also requires a certain amount of physical strength when you want to lift the vehicle. Women may find it a bit large. That's why I chose Point 3 for the work kill. However, JTrip's products are stable, but they take up a lot of space when stored. So I think you should choose one depending on your purpose. I am also satisfied with BF products. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
It can be used for the current model without any problem.
I've been using it on my current model since 2019 and it works perfectly fine.
I think the ease of use is the same for all models.
By the way, I used it for many years with Ape 50 and CB400SF.
View detail
Fits: KAWASAKI Ninja 250R, KAWASAKI Ninja 250R
Functional, exceptional storability!
We are looking for a Front stand that does not take up space for storage because it is being maintained at the bicycle parking lot in Apartment.
Although I did not understand how to use at all in the photograph and the explanatory note of the product page, since it was said that it was able to be used without problems with the Impression of others, I bought it with a half-trust.
Even if it arrives, handling Instruction Manual was not attached either. Anyway, when I apply it to Motorcycle, I see.
With the middle stick in the hole of Stem, lifting it on the principle of Lever, the part of the foot naturally supports the upright foot support.
It takes a little power when lifting, but it is enough for function.
Material : Because it is Stainless Steel, I do not seem to worry about Rust.
When used in conjunction with Rear stand, stability feeling seems no problem.
You will be able to exchange Tire and Front fork as well.
I feel that the price may be a little cheaper, but I think that this is only Compact, no other functional one.
View detail
Simple STAND, but finishing, ease of use, arrangement is wonderful.
Used for Warmer winding and Wheel exchange in Circuit.
Transporter got Small, I was suffering from loading, so purchase this product.
Simple STAND, but finishing, ease of use, arrangement is wonderful. Finish beautifully light. Transportter loading is preeminent because its dimensions are Compact.
The disadvantage is stability. Is stability feeling inferior to Large width in Roller type
Let's do until Wheel replacement.
Well, this Type is useless.
Also, the insertion point, the accuracy of the boss is too high Requires kitchen wear.
Those who are considering purchasing please check the system of the insertion mouth well. I can not use it because of a systematic difference
View detail
18in. It can also be used with Tire 's DREAM 50.
DREAM 50 has a Tire size of 18 in. So, Front-up Stand needs a certain height. With this STAND it is possible to detach Tire & Wheel with enough margin. Material : All Stainless Steel is a beautiful product. View detail
Fits: MORIWAKI MH80, HONDA NS-1, MORIWAKI MH80, HONDA NS-1
Simple and easy to use.
I use it for HONDA's NS-1. With Simple it is hard to break without fine parts, so Stainless Steel makes it easy to drop dirt that it got hard to rust. I thought that it was a bit expensive. View detail
Fits: HONDA CBR600F, HONDA CB400SF, HONDA CBR400RR, HONDA CBR600F, HONDA CBR900RRFire blade, HONDA NSR250R, HONDA NSR250R, HONDA RS250, HONDA VTR1000FVTR1000F FIRESTORM, HONDA VTR250, SUZUKI BANDIT250, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
[ -- the Webike Monitor ] -- he is Mr. Battle factory who is performing Race activity truly -- when it took out from a box at the beginning of , it was surprised at lightness. and the power which carries out a Jack-up are also light power, a
[ -- the Webike Monitor ]
-- he is Mr. Battle factory who is performing Race activity truly -- when it took out from a box at the beginning of
, it was surprised at lightness.
and the power which carries out a Jack-up are also light power, and ends.
Also when putting in the
Axle Shaft, a STAND cannot interfere and it can put in.
Welding is very polite at
last moment, and structure is also quite good for it!
Colet was goods which are purchased and can be regarded as good.
View detail
It purchased by Mr. Webike for maintenance of a dream. The accuracy of a product is good and it has also satisfied structure. Lift up of a front is made very simply. I think that they are a price suitable for a small displacement vehicle, and
It purchased by Mr. Webike for maintenance of a dream.
The accuracy of a product is good and it has also satisfied structure.
Lift up of a front is made very simply.
I think that they are a price suitable for a small displacement vehicle, and facility.
View detail
It is quite unstable although purchased to the NSR250R (89) front forks OH. It replaced with the roller type stand after all. A roller type and the direction which is wavering recommend you a roller type.
It is quite unstable although purchased to the NSR250R (89) front forks OH.
It replaced with the roller type stand after all.
A roller type and the direction which is wavering recommend you a roller type.
View detail