Reviews
Quantity:1 Set of 6pcs.
Quantity:I purchased 1 Set of 6pcs. and thought the price was normal. View detail
Not required for all DRCSprocket
I got a DRC Sprocket separately and mistakenly thought this Bolt with Taper was a must and bought it. View detail
It's light!
Light, light, light! I am self-satisfied. View detail
I'm sorry, but please change your delivery address. I registered as a member at the new address.
I'm sorry, but please deliver it to the new address.
Your membership registration has already been changed.
View detail
It felt easy to lick.
It is possible that the accuracy of the tools you are using is poor.
I found it easy to lick. I don't think I would purchase again.
View detail
The premium was made according to the wheel and the sprocket. It contributes to a weight saving not a little.
The premium was made according to the wheel and the sprocket.
It contributes to a weight saving not a little.
View detail
Installed on a WR250R
I replaced the taper bolt because it was necessary when replacing the Sprocket, but I felt that it was a little too easy to lick the tool, so I think I'll use a different bolt next time. View detail
I couldn't fit it on the CRF250L.
Can I fit a DRC Spo ROCKET before I buy it? I asked about it. Because word of mouth said it was Taper so I couldn't wear it and it was a waste of money! Of course I told them about the word of mouth. In reply this item is Large sturdy! It fits! I'm going to contact the manufacturer and ask for a picture of the product. Please send me a picture of the item and I will send it to the Manufacturer. → Please send it to me by designated courier service by cash on delivery. I've been waiting for 20 days....Moreover, they told me to remove the OEM and install it, but it was impossible for me to install it on my spare wheel. I stopped because it's a waste of time and fuel, I got an email apologizing and that's it. The products etc. are cheap and convenient to shop at, but what about this response? Minus 5 as a response to Shop rather than a product! Well, it's convenient, so I'll continue to use it, though! View detail
Fits: HONDA MONKEY
If the price is a little lower, it's a good choice
I used the same product Gold as this one
You can remove and put it on and off every time you do the setting
Because I applied a little force when I tightened it, I ruined a Screwball mountain
I'm going to re-purchase the blue one this time
Since DrivenSprocket spacer is also installed, this time without washer I'll install it
(I'm changing the Bolt, which is a little long, but when I put in Washer, it doesn't take until the end to get the Nut
View detail
Fits: HONDA MONKEY
Just the right amount of tightness!
We did a RearDrivenSprocket exchange for MONKEY
I had to remove and install it about 3 times because it was a little bit displaced
One of the threads was ruined because I tightened it too much
Material:It's Aluminum, so it's better to tighten it appropriately
I'm currently a Gold Sprocket and will buy Blue again
View detail
It is Fu Two.
Honda's OEM Parts Number Because ordering is troublesome, I replaced it with kore.
Material is so soft as Aluminum casting.
I had to scare it when it was not working carefully.
It works well if attached, but is not suitable for frequent removal.
View detail
![[Sword Wheel Repair Parts] Sprocket Mounting Bolt (6PC)](https://img.webike-cdn.net/catalogue/images/3380/bolt_set_l_TS.jpg)
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1100GP, KAWASAKI Z1000R, KAWASAKI Z1000 GP, KAWASAKI Z1000J, KAWASAKI Z1000, KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1100 (KZ), HONDA CB900F, HONDA CB750, HONDA CB1100F, KAWASAKI Z1000R, KAWASAKI Z1000 GP, KAWASAKI Z1000J, KAWASAKI Z1000, KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1100 (KZ), HONDA CB900F
It was a diversion purpose - - -
Stud boltSpec by hub deviation by diverting other model Wheel. I bought it for stopping Bolt from.
I was looking for a half Screw-like thing so I thought that it would be effective but changed the width of the Sprocket
A little time (It is SUNSTARSprocket) I could not divert it.
Since it thinks that there is an escape in the original Screw hole, if it is a hub which does not hack up, if this BoltSpec. It may be possible to change.
Since it is a purchase for diversion purposes from the beginning, it may not be an imp
I think that the accuracy of Bolt itself is correct.
View detail
The texture is not that good
Purchased for DRC Sprocket installation.
It's inexpensive and it will become soiled by anything, so it does not matter if you care about its appearance.
I do not understand Material well well, but be careful not to make it rust.
View detail
Sprocket exchange
Since it is necessary for Sprocket exchange of DRC, I bought it with Sprocket at the same time.
The required number is 4, but since this product is Pack of 06 Rin Quantity : 2 pc over. I think that it was still better if 4 lines were lineuped.
View detail
Fits: HONDA MONKEY [MONKEY]., HONDA MONKEY [MONKEY].
One point ♪
I bought it to match the color of Chain and Sprocket.
I like it myself ♪
The object itself is lighter than the OEM.
I would like to see how long we will be durable.
View detail
PMC 10mm Driven Sprocket Nut
Because it is Uniqlo plating, it becomes a little white like shine than normal Plating.
I bought without looking at the item description well, but as I imagined normal Chromium Plating, I was a bit disappointed.
Because it is a commodity of PMC, I think whether there is a problem with the product.
View detail
Quantity : This price with 1 Set of 3-items !!
【What made you decide the purchase?】 Bolt - NutWasher is attached to each 6 each and this price is attractive
【How was it actually used?】 I purchased it because it is necessary for installing Sprocket of DRC but it is not possible and it is impossible
【Was it difficult to install? (Hard parts case)】 Any item
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any item
[Is there anything I was disappointed about?] Since the price is expensive, it can not be helped but it looks cheap
【Hope for Manufacturer - Please let me know if there are any improvement points】 DRC's are inexpensive and many good ones so I want you to continue making good ones
【Have you compared items?】 nothing special
[Others] Any item
View detail
He bought it together with the Sprocket of DRC. In order to both run with town riding and a Course by one set, Sprockets are exchanged fairly frequently. Since it is the parts which throw away, the thing of DRC nature cheaper than brand-name parts is us
He bought it together with the Sprocket of DRC.
In order to both run with town riding and a Course by one set, Sprockets are exchanged fairly frequently.
Since it is the parts which throw away, the thing of DRC nature cheaper than brand-name parts is used.
It is the better, if durable to a slight degree since it is a portion which requires the
Torque.
View detail
[Webike Monitor] It purchases per Sprocket exchange.Whatever it may call it, it is satisfied with a low price! Although it seems that intensity is not strong, it will be attachment etc., and if it cares for a while, it will seem to be a Level wit
[Webike Monitor] It purchases per
Sprocket exchange.Whatever it may call it, it is satisfied with a low price! Although it seems that intensity is not strong, it will be attachment etc., and if it cares for a while, it will seem to be a Level without a problem in particular.
View detail
When you buy it with brand-name parts, a very expensive Bolt is this price by a Set! Is it saved?
When you buy it with brand-name parts, a very expensive Bolt is this price by a Set! Is it saved? View detail