Reviews
Fits: SUZUKI GS400E, SUZUKI GS125E KATANA, KAWASAKI VULCAN1600 VULCAN Mean Streak 1600, SUZUKI GS1100, SUZUKI DF200, SUZUKI GS1000E/S, KAWASAKI VULCAN1600 Classic, KAWASAKI EPSILON150, KAWASAKI Z750T (TWIN), KAWASAKI Z750T (TWIN), HONDA MAGNA 50, HONDA BROS650, HONDA BROS650, HONDA BROS400, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA GIORNO CREA, HONDA FUSION, HONDA XRV750 AFRICA TWIN
It was a batch of Drumstick sparks.
I used Brakes cleaner for installation.
The code is squeaky clean.
LargeThis is an amazing spark like the spark I had when I used the SPIRITFire code a long time ago.
This Japan quality might be bad.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Effective
It's cheap and it works. It looks really good too. View detail
More of a viper than a COTA tuchord.
I used it on a 1960's Vintage motorcycle.
The Plug cord was about to decay due to heat damage from the Engine and age-related deterioration.
I was considering the replacement, but when I thought that it was a little tasteless with a normal Plug cord, I found this Vintage Style Plug Cord of Guts Chrome. Because the price is reasonable, I bought it.
Since a vehicle is a vehicle, performance is not what we are looking for in the first place.
This is a complete appearance oriented parts.
So I can't make any Impressions about the performance, but so far I haven't had any problems.
The look I was interested in was honestly not what I was expecting.
I was hoping for a COTA tucord-like dorkiness, but it's more of a venomous snake pattern than a COTA tucord with a stronger Vinyl feel than I was expecting.
It's a small one that looks like it belongs in a country garden or something.
Still, I think that it is more interesting than using a normal Plug cord. Because I thought, I use it as it is.
By the way, the outer diameter is a little thinner than NGK's power cable. The noise to the CDI etc. might be increased if the leak resistance is low. (I'm not feeling it.) 。
On the other hand, I think it is easy to use for hiding Wiring in Ska tune.
The rubber or vinyl coating on the surface makes it look a little hard, but it becomes soft when warmed.
View detail
Fits: BUELL Universal, HARLEY-DAVIDSON DYNAFamily
Easy to replace
American's Plug cord can be easily replaced for a custom look and feel, and the Spiral Core is heat resistant for more than just a NORMAL look. View detail
Trusted NGK
This is a replacement from Nagao Electronics Ultra. Ultra's cord itself is good, but I replaced it with NGK's because it is too tight unless the insertion angle is 90-degrees. I use it for Utani SP-IICoil, but it was easy to install. View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Torque up in the low and mid range!
In the beginning. Please note that this is an impression of the simultaneous installation of "NGK 2-wheel Power cable" and "SP Takegawa Hyper Ignition Coil". (Sweat)
I was trying to make it easier to cruise at about 70km/h on my MONKEY125. (Enhanced high rpm range) I installed this parts. The impression after the installation is that the car is more powerful and has more room to accelerate when starting from zero when waiting at traffic lights. Torque up in the low to mid range is amazing. The torque up in the low to mid range is amazing. The hill climbing ability is also improved. It is easy to install and recommended for custom beginner. The torque at 3500-6000rpm is thicker than normal. If you change one by one, you may know the difference. (Sweat) Custom inside the Engine is not done because of the durability problem, but this Custom of the ignition system is Recommendation.
View detail
Ultra Nagai Electronics SiliconPower plug cord
I bought it because OEMPlug put in a thing and a fish trough.
I don't know the effect because it was originally a Motorcycle with good starting performance, but it seems to be somewhat different.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
NGK Power Cable
Power cable NGK. I bought Minsk for a motorcycle. The spark is great. Before that there was another company, there was a very bad spark. But after installing the NGK power cable, the bike started to start better. The cable is long and thick. The quality is excellent. I advise! View detail
Fits: Others , YAMAHA SR500, YAMAHA TTR125, YAMAHA TW125, YAMAHA TW200 E, YAMAHA TW200, YAMAHA YB-1, HONDA MONKEY, HONDA XR100R, HONDA XR50R, HONDA XR70R, KAWASAKI 250TR, SUZUKI DF125, SUZUKI RV200 VANVAN, YAMAHA MAJESTY 250 (4HC) SV, YAMAHA MAJESTY 250 (4HC), YAMAHA MAJESTY125, YAMAHA SEROW 225 S, YAMAHA SEROW 225 W, YAMAHA SEROW 225 WE
For the final seasoning of the ignition system.
I used the reinforced coil but only replaced the plug cord because I saw damage to the plug cord. It is expensive, but it is real.
good point
It can be used with both OEM and external coils to produce a strong spark.
Torque is going up!
The fuel consumption will also increase by about 1km.
It means it burns more efficiently.
A bad point
It is quite large and strange to remove from the existing coil, and the installation is also large and strange.
The Coil is strengthened, the Plug cord is strengthened, and it is a feeling that the thing to do in the ignition system was done.
Ignition system is essential to use the performance of Engine efficiently!
View detail
คุณภาพดี คุ้มเกินราคา View detail
Fits: HARLEY-DAVIDSON Pump head, HARLEY-DAVIDSON Shovel head, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON DYNAFamily
Used in servicing Dyna coil
I bought this because the length of the high-tension cord became insufficient due to the layout change of IGCoil.
It's about 60cm long, so it's probably compatible with most Motorcycles, and will accommodate those who don't want to place the IGCoil near the Engine, and want to place it behind the carburetor.
High-Tension Cord (Plug Cord) If you are not familiar with maintenance, you may want to cut your bike to your desired length, then take it to a motorcycle shop and pay for the work to be done.
If you hit the IGCoil with a hammer, the coil will break in half and become useless.
Then it's better to pay a little Gold and get a reliable press-in.
If you forget to incorporate the Dust Boots before press fitting, you will have to start over (and the Crimp may not be reusable).
If you apply the wrong amount of pressure when fitting the Dust Boots, the Crimp may fall out (if it is pushed in properly, it will not come out).
IGCoil must be fixed in a vise or a jig to tap, otherwise it will be gapped.
When the work is finished, measure the resistance value to confirm that the value is as per the service manual.
If this value is not correct, it is assumed that there is a problem or inadequacy in the core wire processing or Crimp processing.
So, it is essential to measure the resistance before press-fitting and with no code.
View detail
Fits: SUZUKI DF200, KAWASAKI VULCAN1600 VULCAN Mean Streak 1600, KAWASAKI VULCAN1600 Classic, KAWASAKI EPSILON150, KAWASAKI Z750T (TWIN), KAWASAKI Z750T (TWIN), HONDA MAGNA 50, HONDA BROS650, HONDA BROS650, HONDA BROS400, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA GIORNO CREA, HONDA XRV750 AFRICA TWIN, HONDA XRV750 AFRICA TWIN, HONDA XRV650Africa Twin, HONDA XR70R, HONDA XR230MOTARD
I bought this product because it is a reliable Manufacturer.
I changed to Iridium plugs and I also changed Cable to Power cable. It's just my personal impression, but I think the engine start and acceleration got better. The cable was too long so I cut it to the right length and installed it. View detail
Fits: HONDA CBR1100XX SUPERBLACKBIRD, HONDA X11, HONDA CBR1100XX SUPERBLACKBIRD
More than OEM
[How is it used?
Change from OEM
The quality of Rubber seems to be high.
Highly Waterproof.
You can pull it out and put it in.
It's supple and mine stands out with Blue.
The ignition is normal and safe.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
Relief
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Norology was popular in the past, but in the end I think this is the most reliable in terms of quality.
View detail
Fits: SUZUKI INTRUDER400, SUZUKI XN85 TURBO, SUZUKI INTRUDER400, SUZUKI SW-1, SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX1100S KATANA (KATANA), KAWASAKI Z1000R, SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX1100E, SUZUKI GSX1100E, SUZUKI GS750, SUZUKI GS750, SUZUKI GS750, SUZUKI GS750, SUZUKI GS650G, SUZUKI GS550, SUZUKI GS550, SUZUKI GS250FW, SUZUKI GS250FW, SUZUKI GS1100
always choose right thing
NGK Cable has durable and thoughness. and the color of wire also give your bike looks special i recomeneded if you change the ngk power cable, also change new spark plugs i have honda steed 600, it has 4 plugs and 4 cables so... i need lots of parts to feel the change View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Refresh
[How is it used?
I recently got a CUB for commuting and have been tinkering with hanghang.
I installed Minimoto's 88CCKit in the engine and changed the carburetor to PC20.
I thought I hadn't done anything to the electrical system, and the Plug cord was getting hard, so I replaced it.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Just unplug the old cord from the Ignition coil and plug it in while spinning it around. I think it's a good idea to spray some lubricant on it to make it slide better.
How was your experience with it?
I'm not sure. lol
Maybe the Engine is getting better?
[Included Parts:were they on?
It comes with an Attachment that disconnects the original old Cable in the middle and connects it to this product. But I did not use it.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I think that the most important point is the lubricant during insertion.
View detail
Fits: HONDA CB1100F, HONDA CB350, HONDA CB400F, HONDA CB400F, HONDA CB400FOUR (air-cooled), HONDA CB500, HONDA CB500F, HONDA CB500 FOUR, HONDA CB750, HONDA CB750F, HONDA CB750Custom, HONDA CB750 Four(CB750K), HONDA CBX125, HONDA CBX125, HONDA GL1100GOLD WING, HONDA GL1200 ASPENCADE, HONDA VT250 INTEGRA, HONDA VT250 INTEGRA, HONDA VT250 SPADA, HONDA VTR250
Might be too subtle for FI.
It is installed in ESTRELLA of Injection. When I used it with Iridium plugs, it lost fire and became like Idling of Harley in the thin injection of the fuel injection because it produced a considerably strong spark. Probably, it is suitable for Carburetor. Because it felt physically more powerful than the spark of Iridium plugsSingle Body, Plug has returned to NORMAL and is using it. View detail
Repair Parts
It is convenient for the change of the handling and the Refresh of the aging. View detail
I put the Uotani on my NSR250, but I had to relocate the mounting location and couldn't reach it.
I didn't know these were Repair Parts; View detail
We even have these at Repair Parts!
I bought this for my NSR because I put a Watani on it, but I couldn't reach it after I moved the mounting location. View detail
lucky
I bought this because I installed a Watani on my NSR250, but when I moved the installation location, the cord was not enough.
It's a Repair kit indeed, so no problem.
View detail