Reviews
SEROWRacing cable
I replaced it at the same time I replaced the Ignition coil. It is a product that has been around for a long time and is reliable. To be honest, it is not about the performance, but the effect of the replacement of the Ignition coil and the stress-up effect.
It looks especially good on vehicles with air-cooled engines and plug cords that are fully visible.
I do not feel any difference when driving.
Joint for connection to OEMCoil and Terminal for connection to Plug are required separately.
View detail
Fits: Others NS1:NSR50:TZr50R:TZM50R:RZ50:MONKEY 12V:GORILLA:APE50:APE100:TW:SR400:SR500 etc
Colorful and Beauty.
[How is it used?
I purchased this product along with a plug replacement because the Engine was not working properly.
Was the one you received as per Image?
It was softer Material than Image.
Was the installation difficult?
Simply replace with OEM Plug cord & Cap.
How was your experience with it?
I am not sure about the functionality of the engine, the startability of the engine was not different and I could not feel any difference.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
The functionality did not change, but the appearance became Beauty.
▼I might be able to tell the difference if the body is an older year, but I couldn't really tell.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Standard Custom
High Response compared to OEM.
It was easy to install
View detail
pochPlug cord
Used on a Uotani Coil. Perfectly sized and installed with no problems. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Power up by replacing Plug, Power cable and Hyper Ignition Coil!
Installed on SUPER CUB110JA44.
Removing the leg shield was a bit of a hassle, but installation was easy.
If you have about 15 minutes, I think you can do it.
I thought the cord was too long and wasteful for my Motorcycle.
If only it were a little cheaper.
As for the interval of running, since both NGKDXPlug and Mukawa's Hyper Ignition coil were replaced, I think that the ignition is now running smoother and stronger than before, although it is difficult to determine which one is working.
View detail
Reviews and product supplements are listed.
MAGNA250" Plug cord" I searched for and purchased it in the "OEMPlug cord", but it is thicker than the OEMPlug cord.
Basically, I think this product is compatible with the Coil Relocation Kit.
But both Cap side and Ignition coil side
If the OEMCable is left and processed to be cut and connected.
I think it will be useful.
Product supplement,
Cable does not come with a plug cap,
1 pc with a cable length of about 1 meter.
The thickness is stated as 8mm.
CableBody feels like a solid object.
For your information
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Looks cool too:??
Used for VANVAN75.
Starting performance seems to have improved.
There was no change in maximum speed.
It looks pretty much like it.
View detail
Crimp-prepared, easy and reliable.
Used to install the Uotani Full powerKit.
Due to the characteristics of the car, a long cord was needed to change the handling to a large cord.
At first, I tried to crimp the terminals with my Electric Works Pliers using a different cord, but the size of the terminals was too large to crimp properly, leaving me a little uneasy.
This product is pre-crimped with a special tool from the beginning.
One complaint I would raise is the hardness of the 1234 marker.
I understand that it is a bad idea to remove it easily, but it was so hard that I gave up on attaching it.
It was no help either, but the Plug cordCover of the Uotani Body was also very stiff and the installation was Large strange.
Combined with that, I gave up because my finger power had reached its limit (laughs).
The Plug cord itself is satisfactory.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
While we're at it!
It had deteriorated, so I decided to use NGKPower cable, which has a proven track record and reliability, while replacing it. I think it is stable. View detail
With Plug & Plug cord replacement
Installation with Plug cord replacement
It's not absolutely necessary, but it's nice to have.
Gold price is cheap, so I will buy it again in the future when I need to replace the plug cord again.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
How effective is it?
It is necessary to cut a considerable length of cord, so it takes courage when cutting the cord.
I made it a Red code, which gave it a Custom feel and made it Parenthesis better.
I don't think we should expect anything too large in terms of effectiveness.
View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
NGKPower cable
The red Cable gives it a custom look and stands out. It is difficult to feel whether the power has actually changed, though. View detail
exchange
I replaced the cable I was using with a new one and wanted to use the leftover cable, so I purchased this 1m cable.
New beautiful Red and nice.
If the cap shape fits, we would like to change the front side, but we have no choice but to use OMBlue for the front side.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
The Engine was not sputtering very well.
The Engine was not sputtering very well.
Ignition coil was replaced at the same time.
It had been about 10 years.
The Engine malfunction did not improve, but
I am satisfied with the dress-up effect.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
NGK power cable
I bought it for a stable supply of electricity while doing 115CC BOREUP. I can understand why many people are looking for it. I think it is a really good item because it can even be thought of as a red dress-up. CF POSH: I use it in combination with Racing IG Coil --- ------------------------------------------------------------ ----- 115cc boreup I bought it for a stable electricity supply. I think it's a good item because I can think of a lot of people looking for a lot of people. Powered by Google Translator View detail
Fits: HONDA CB500F, YAMAHA BRONCO, YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO250(XV250), YAMAHA VIRAGO1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR250, YAMAHA DRAGSTAR250, YAMAHA XG250 TRICKER, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA XJR400R, YAMAHA XJR400R
Due to the occurrence of a chronic illness
One of VECSTAR's pre-existing problems, plug cap disconnection while driving, occurred, so it was replaced.
In the case of VECSTAR, the Ignition coil can be replaced from the root, so the cap cover and seal were removed and relocated from the OEM.
The OEM cap cover cannot be relocated without cutting it, but without it, there will be a gap in the Engine Cover, and water and Garbage will hit the Plug hole area, and cooling fan air will leak out.
In the case of Scooter, it is a Large cut to make sure that the cord length, path, and Clamp are correct.
Color for easy visibility as it goes through the Cowl of the Scooter and for easy recognition of dirt and deterioration.:Yellow
The Engine started once before the replacement, but it seems to have Torque up somehow. I wonder.
So far, no omissions have occurred.
Since it is a single cylinder, I am not too concerned about the price, but with four shots, I think it is a bit expensive.
View detail
Fits: SUZUKI GS400E, SUZUKI GS125E KATANA, KAWASAKI VULCAN1600 VULCAN Mean Streak 1600, SUZUKI GS1100, SUZUKI DF200, SUZUKI GS1000E/S, KAWASAKI VULCAN1600 Classic, KAWASAKI EPSILON150, KAWASAKI Z750T (TWIN), KAWASAKI Z750T (TWIN), HONDA MAGNA 50, HONDA BROS650, HONDA BROS650, HONDA BROS400, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA GIORNO CREA, HONDA FUSION, HONDA XRV750 AFRICA TWIN
exchange
Does it work? To be honest, I'm not sure, I don't really feel it, but I think it looks good. View detail
![PLUG WIRES B/S 04-06 XL [2104-0183]](https://img.webike-cdn.net/catalogue/images/36687/21040183_TS.jpg)
Fits: HARLEY-DAVIDSON XL 883R, HARLEY-DAVIDSON XL 1200C Custom 2004 - 2006, HARLEY-DAVIDSON XL 1200L Low 2006, HARLEY-DAVIDSON XL 1200R Roadster 2004 - 2006, HARLEY-DAVIDSON XL 883 2004 - 2006, HARLEY-DAVIDSON XL 883C Custom 2004 - 2006, HARLEY-DAVIDSON XL 883L Low 2005 - 2006
It's time to change.
I had to replace the Motorcycle as it was getting old.
It is well made and the price is cheaper than OEM, so I think it is cosmetically good.
The replacement was easy and the work time was short.
View detail
Fits: BUELL Universal, HARLEY-DAVIDSON DYNAFamily
Easy to replace
American's Plug cord can be easily replaced for a custom look and feel, and the Spiral Core is heat resistant for more than just a NORMAL look. View detail
Fits: SUZUKI DF200, KAWASAKI VULCAN1600 VULCAN Mean Streak 1600, KAWASAKI VULCAN1600 Classic, KAWASAKI EPSILON150, KAWASAKI Z750T (TWIN), KAWASAKI Z750T (TWIN), HONDA MAGNA 50, HONDA BROS650, HONDA BROS650, HONDA BROS400, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA GIORNO CREA, HONDA XRV750 AFRICA TWIN, HONDA XRV750 AFRICA TWIN, HONDA XRV650Africa Twin, HONDA XR70R, HONDA XR230MOTARD
I bought this product because it is a reliable Manufacturer.
I changed to Iridium plugs and I also changed Cable to Power cable. It's just my personal impression, but I think the engine start and acceleration got better. The cable was too long so I cut it to the right length and installed it. View detail