Reviews
Fits: HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR, HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR
Exhaust manifold Gasket
I chose the cheapest one and it was perfect - no problems and no gas leakage. View detail
Fits: HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR, HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR
Made by POSH for safety!
I always used KITACO but this was cheaper so I bought it.
Compared to KITACO, it is the same as KITACO Large and seems to work fine.
View detail
Why use a spark plug tester?
It is an instant answer to 'does it have spark? ' when your engine won't start. CF POSH spark tester will save your time, money and avoid frustration as it offers the safest way to detect a spark. It takes roughly about 20 to 30 seconds in order to identify the problem. The spark tester connects between the spark plug and spark plug wire to troubleshoot dirty spark plug connections, defective points and bad cables or connections.Test with a spark plug tester . (01).Attach a spark plug tester to the ignition wire. At the other end, the tester connects to the spark plug as it sits in your engine. Turn the ignition ON. (02)-Start the engine, or simply turn it over if it won't start, and watch the transparent sides of the tester. What color should spark tester be? Should a spark plug spark be blue or orange? Orange is a weak spark. You want a Blue spark. A bright light will appear inside the TESTER when a good spark occurs .CF POSH Spark Checker MUST HAVE AN ITEM IN YOUR GARAGE.CF POSH Spark Checker PRICE IS SO CHEAP AND It must be said that it is worth more than the money paid.Need to remind WEBIKE packaging and fast reliable service .WEBIKE PACKAGING IS TOP NOTCH and very well secure.The only place where you can confidently buy the spare parts you need at the lowest prices . very well organized online shop . webike shop is very AUTHENTIC . 5STAR SHOP. Thank you webike for the support. View detail
Fits: HONDA CBR1000RR, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four, HONDA CB1000 SUPER FOUR (Big One), HONDA CB1300 Super Four
When replacing the Exhaust System of CB1100etc!
[How is it used?
When we replaced the Exhaust System, we had to replace the Gasket as well, otherwise it would leak and cause power down.
How was your experience with it?
It is designed for CB1300, but can be installed on CB1100 without any problem.
Of course, the quality is fine and can be used without disposal leaks.
How did it compare to other products?
The cost performance is good because it is cheaper and of higher quality than OEM Product and KITACO's same etc. products.
[Points to note]
Note that if it has not been replaced for a long period of time, it will stick to the Engine side and scratch it if not carefully removed.
To prevent waste leakage, replace the exhaust system with a new one even if it is troublesome.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-12R, KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-12R
Posh Exhaust Gasket
I used it on my GPZ900R.
The price was low and it worked fine.
View detail
Heat and scratch protection
The evaluation did not seem to be bad, so I bought it to try it out.
Since it seems to have high heat resistance, it is used to prevent heat deformation and scratches on the inside of cowls. The price is not that much, and there are a few meters, so it can be used to some extent. I would like to check the adhesiveness for a while.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA livudio, HONDA Livdio ZX
Battery reply
I installed this on my MONKEY 12v Z50J because I rarely ride it and I feel the power is obviously stronger than the dead battery. View detail
Fits: HONDA XR100 Motard, HONDA XR50 Motard, HONDA XR100 Motard, HONDA XR50 Motard
NSR50 being assembled
Used to install rear sprocket on NSR50. View detail
difficult to install
It was difficult to install and tore during installation. View detail
Cap bolt with high universality.
[How is it used?
When I got my 25 year old PAT225WE, I bought it as a replacement for an OEM bolt (some of them I didn't know where they came from) that had been licked and tired at the corners after maintenance and restoration.
Unlike the steel BlackCap bolt sold at the local home centerretc., the Material:Stainless steel makes it easy to use for fixing the exterior and switches, etc., as it is resistant to rust, and is useful in various places.
Was the one you received as per Image?
As I mentioned above, it is a relatively MAJOR design bolt that can be purchased at home centers nowadays, and it is just like the Image product.
Was the installation difficult?
This is a type of bolt that is detached and attached using a Hexagonal Wrench.
If you have the dedicated tools, it is not difficult to remove and install the bolt, as the removal method is the same as that of the Others bolt.
I think it is becoming the next most popular after the normal convex hex Head Bolt!
How was your experience with it?
Although it is a bolt that is relatively easy to pick at, the stainless steel material makes it harder to lick than a steel cap bolt, and the black color makes it less noticeable when fixing switches and plastic parts, making it a very easy product to use.
[Included Parts:were they on?
There are no Included Parts:other than Bolt.
2 Bolts on Package Quantity:The product is sold in each length as a Set.
[Was there anything that disappointed you?
Basically, no.
At one time there was a lot of fuss about corrosion and gnawing depending on the type and characteristics of the Gold genus, but I'm an amateur and don't know much about it.
Other items that would be helpful
Point and hang of installation
It is a convenient bolt that can be used alone or in combination with the FUJI crucible type aluminum spacer.
[Notes]
As with any Bolt, please insert the appropriate tool firmly and deeply into the bolt before attaching or detaching it.
Failure to follow the above will lead to unexpected trouble, such as licking the bolt.
[ITEMS TO BUY TOGETHER
This is a Bolt only product (pack of 2), so if you want to use it where a Nut, Spring washer or Spacer is required, please purchase the necessary items separately.
[Opinions and requests to Manufacturer
Thank you very much for the lineup of various lengths. If you could reduce the price a little more, it would make it easier to purchase large quantities.
View detail
Thermal measures!
I installed an Oil Temperature Meter on my NC750X, but I have to pass the WiringCable under the Engine, so I will try this heat resistant tape as a thermal countermeasure. I think it will be no problem. I am also planning to put the heat resistant tape on the Under Cowl of the NC750X because the heat from the exhaust system melts the Under Cowl. View detail
Fits: Others
Highly universal design like a certain manufacturer's OEMBolt
[How is it used?
I purchased the DRC Aluminum Spacer for M6 to go along with the SEROW225WE as a Bolt to match when used to secure the exterior of the SEROW225WE.
The following items are "DRCAluminum spacer and Quantity:The "State used in Set" will be in Review.
Was the one you received as per Image?
As the title suggests, it is a bolt with a Flange that can be turned with an 8mm size Socket or Wrench, I believe that this Flange makes the Large size fit the recess of the Aluminum spacer perfectly, which leads to the sense of unity when the exterior is fixed.
The product was as per the Image.
Was the installation difficult?
The method of use is no different from that of a regular bolt.
How was your experience with it?
I tried to match several different Bolts in combination with Spacer's Spacer made by DRC. Design without being too assertive." Several lengths are relatively easy to come by." Cost per unit performance." I have been using this Bolt in my Spacer vehicle since then.
[Included Parts:were they on?
There are no Included Parts:other than Bolt.
Quantity of 2 Bolts in a Package made of Vinyl:The product is sold in each length as a Set.
[Was there anything that disappointed you?
It is Uniqlo plating, so Rust may occur in some environments, but considering the mature design and cost performance, it is a sufficient product and I have no complaints.
Other items that would be helpful
Point and hang of installation
The aluminum spacer is changed to match the coloring of the location where the bolt is used, and the bolt length is the same as that of the OEMBolt.
[Notes]
Since the head part is 8mm in size, if the proper tool is not used, the corner will be licked and it will not be able to be tightened at the specified torque, and rust will easily occur.
Any Bolt should be carefully tightened or loosened using the proper Size tool.
[ITEMS TO BUY TOGETHER
Naturally, it can also be used with Single Body.
However, I think it will look even better when combined with an aluminum collar, as I did this time.
[Opinions and requests to Manufacturer
Thank you for the lineup of various lengths.:I would appreciate it if you could sell Stainless Steel products.
View detail
Black and hard.
Black and hard.
I know it's short.
It's not about length.
It's hardness, after all.
Black Dye Bolt is my favorite.
I think I'll buy the Black dye solution.
View detail
For installation of Rear Sets
Apparently, a button cap bolt is good for the Rear Sets attachment point to prevent them from getting caught on the shoes, so I used this one.
It's not easy to find these sizes at home centers, so it's nice to be able to choose the size and type in detail at Pinpoint.
View detail
Used for reproduction of old cars with direct cord
[How is it used?
old car (SportsCUB) Used in Restore of
Was the installation difficult?
Both cords are not too difficult to screw in.
Remember to put the Heat Shrink Tube through beforehand.
How was your experience with it?
Once again, I thought it might be a little dangerous since the insulation is taken only by Heat Shrink Tube.
If the Tube is Gapped or frayed and breaks, high voltage is exposed.
Installation location should be noted.
[Included Parts:were they on?
Instruction Manual is provided, so you will not get lost even if it is your first time.
View detail
It stands out
It's just a Bolt, but it's beautiful and stands out. View detail
One point
I used it for One point around Handlebar. It is a completely self-sufficient part. View detail
Fits: Others NS1:NSR50:TZr50R:TZM50R:RZ50:MONKEY 12V:GORILLA:APE50:APE100:TW:SR400:SR500 etc
Colorful and Beauty.
[How is it used?
I purchased this product along with a plug replacement because the Engine was not working properly.
Was the one you received as per Image?
It was softer Material than Image.
Was the installation difficult?
Simply replace with OEM Plug cord & Cap.
How was your experience with it?
I am not sure about the functionality of the engine, the startability of the engine was not different and I could not feel any difference.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
The functionality did not change, but the appearance became Beauty.
▼I might be able to tell the difference if the body is an older year, but I couldn't really tell.
View detail
Firmly usable
[How is it used?
I used it when I changed the Silencer on my YAMAHA XJR400R from MotoGEARΦ100 to K2tecΦ86.
The Φ14 thinner Silencer band is now farther away and cannot be handled by the existing Bolt.
We measured the amount of gap and decided to put aluminum collars on the rear suspension and silencer band side to fix them in place.
How was your experience with it?
The measurements were perfect and firmly fixed.
I have also done a good job of Torque management, so I don't think there will be any problems.
How did it compare to other products?
This time I bought 80mm and 50mm.
Home center also sells Bolt, but basically they don't sell P1.25, so you have to buy it at motorcycle supply stores or on the webike.
I think it's good
[Points to note]
Aluminum is surprisingly soft.
Be careful when working with Overtorque, as it can easily be severed when tightened with Overtorque.
View detail
pochPlug cord
Used on a Uotani Coil. Perfectly sized and installed with no problems. View detail