Reviews
Fits: HONDA VALKYRIE1500 TOURER, KAWASAKI VERSYS 650, SUZUKI GEMMA250, SUZUKI GSR250, SUZUKI GSR250F, SUZUKI GSR250S, SUZUKI GSX250R, SUZUKI INAZUMA250, SUZUKI V-STROM 250, SUZUKI IMPULSE400, SUZUKI IMPULSE400 TYPE-S, SUZUKI RF400R, SUZUKI RF400RV, SUZUKI SKYWAVE650, SUZUKI SKYWAVE650, SUZUKI GSF750, TRIUMPH STREET TRPLE675, TRIUMPH BONNEVILE800, TRIUMPH BONNEVILE865, YAMAHA CYGNUS X
It stops better than NORMAL.
It stops more than NORMALPad.
It's about half as thick.
It is easy to control and suitable for touring and winding. Considering the cost performance, it is about half the thickness, so I think it is not the most expensive one.
I'm not sure it is suitable for Circuit or Sports driving applications.
View detail
Fits: BMW Monolever R 100 RT from 09/85 on, BMW Monolever R 80 from 09/85 on, BMW Monolever R 100 RS from 09/85 on, BMW Monolever R 65 from 09/85 on, BMW R 100R, BMW R 100R Mystic, BMW R 80, BMW R 80 from 09/89 on, BMW R 100GS from 09/89 on
Thanks for handling it.
[How is it used?
chirping of a small bird (Dragging at the limit of use?) Exchange due to
How was your experience with it?
no problem
Braque squeaks are cleaned and eliminated upon visual inspection of the part mold prior to ordering.
Brake Shoe had room to spare before replacement, but was replaced due to age-related deterioration.
How did it compare to other products?
Other manufacturers that I searched on the Internet said that it works, but there is a lot of dust.
[Points to note]
The Brake Shoe of R100GS is completely different between the First Model Type and the Second Type Model, so it cannot be used. (We are Second Type Model of 91 MODEL)
Brake Shoe only, Spring and its protective rubber are not included.
The finish is just a little rougher than the OEM Product that was removed.
There was a slight BALI or roughness in the areas where Spring might touch, the hole it passes through, or where it might touch Cam, so I scraped and polished it with File, just to ease my mind.
[Others]
It is nice to know that OEM Products through Dealers have more inventory than expected, even after decades of Motorcycle discontinuation, but the prices are several times higher than they used to be, perhaps including administrative costs.
Giebenrock is still selling some of 2Valve's R100 Parts! (See Germany's website) I have never imported from a private company before. I have never imported from an individual before, so I purchased from WeBig.
*I rated it in the middle because it has only been installed for a short time.
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CB300R
Easy Quantities:Set
I had only used SUNSTAR for Sprocket, but Chain was new to me.
The seal attached to the product is a grooved type with a structure that seems to hold grease well.
The Edge of the Plate is also arched, giving it a luxurious look.
View detail
On the MVX250F.
I used it to fill the front fork with air. It's good because I can fill low pressure like 0.4 properly. View detail
Fits: BMW Monolever R 100 RT from 09/85 on, BMW Monolever R 80 from 09/85 on, BMW Monolever R 100 RS from 09/85 on, BMW Monolever R 65 from 09/85 on, BMW R 100R, BMW R 100R Mystic, BMW R 80, BMW R 80 from 09/89 on, BMW R 100GS from 09/89 on
Glad you are selling it.
OEM Product via Dealer is nice to have in stock even decades after Motorcycle has been out of production, but the price is several times higher, perhaps including administrative costs.
I thought that Giebenrock, which still sells some parts for the 2V R100, would be more reliable than other manufacturers that I could find on the Internet, so I bought from Webig, since I have never imported from Japan.
I rated it in the middle because it has only been installed for a short time.
*The number of Parts we deal with has been reduced a lot on the Giebenrock Home page.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ250FX, YAMAHA YZ450FX, YAMAHA YZ450FX, YAMAHA WR250F, YAMAHA WR250F
Rear works just fine.
I bought this for beta RR2T 250 MY2020 which I always use for forest road touring.
Rear brake is used.
ZETA has good Control instead of rapid Brake not working.
Therefore, we have installed ZETA's Pad to meet the Rear brake, which is hard to Control when it is too effective.
Especially on sharp downhills, too much effect will inevitably lock the rear brake, so a pad like ZETA's is just right.
View detail
Fits: その他 Off Road Caliper P2 28 (Code XQ21361), その他 Off Road Caliper P2 24 (Code 122A99021), その他 VR250 Super, Otard, その他 VR250 Enduro, その他 Scrambler, その他 Granpasso, その他 Granpasso, その他 Granpasso, その他 Granferro, その他 GT, その他 Enduro 610, その他 Enduro 250, その他 ED250, その他 E 570 Enduro, その他 CD610., その他 C 570 MX, その他 C 500 MX, その他 C 450 MX, その他 ATK700 Intimidator, その他 ATK620 Intimidator
It works better than ZETA's Pad!
I installed it on my gasgas EC250 which I always use for forest road touring.
I used to use ZETA Brake Pads, but I had a symptom that the brake did not work too well on descents, and my arms would go up when I rode for a long time or during high-load Situations such as Race.
So I started working on improving Brake and the first thing I bought was Brake Pads.
It was not a drastic improvement, but it works better than ZETA's Pad, and it can stop with a little less Speed in Downhill, etc. However, I still have the impression that a little more StopPingPower would be nice.
View detail
Impeccable!
I chose a handlebar 100mm longer than the OEM one to replace the handlebar on my SR400. The movement is smooth and I like it! View detail
Fits: SUZUKI DF200, KAWASAKI VULCAN1600 VULCAN Mean Streak 1600, KAWASAKI VULCAN1600 Classic, KAWASAKI EPSILON150, KAWASAKI Z750T (TWIN), KAWASAKI Z750T (TWIN), HONDA MAGNA 50, HONDA BROS650, HONDA BROS650, HONDA BROS400, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA GIORNO CREA, HONDA XRV750 AFRICA TWIN, HONDA XRV750 AFRICA TWIN, HONDA XRV650Africa Twin, HONDA XR70R, HONDA XR230MOTARD
On the SR400.
If you buy an older Motorcycle, replace it!
I am always grateful for this product!
The texture is nice and not cheap.
View detail
Fits: HONDA BROS650, HONDA BROS400, HONDA NIGHTHAWK750, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Shadow slasher750, HONDA Shadow slasher400, HONDA Shadow classical400, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW750, HONDA SHADOW400, HONDA SHADOW400, HONDA SHADOW400, HONDA XL400VTRANSALP, HONDA XL250, HONDA X4
Cheaper than OEM
I bought this one because it was cheaper than OEM.
There are no exhaust leaks and no problems.
View detail
Fits: HONDA GB250 CLUBMAN, HONDA MVX250F
The texture and shape is so nice that you can hold the Lever all the time!
The adjustment range is quite large, which is convenient, and the large 1-Click angle makes it easy to see the effect. However, the furthest away is too far away to grip, and recently it is too close to full break or full clutch cut.
The color is very nice, I chose Titaniumium color for both Lever and Adjuster, and it matches the traditional atmosphere of GB250 CLUBMAN EXACTLY. I could have chosen a gorgeous color for the Adjuster with Accent, but I think it would have floated around the Handlebar of GB250 CLUBMAN, so I am glad that I chose the same color.
Once, Side Stand didn't go down to the end and I tipped it over, but thanks to Foldable, the lever didn't break! (Lol)
I am satisfied with the WW because the reversible function worked perfectly.
View detail
I think the texture is good.
[How is it used?
I replaced it and ran about 150 km.
The shape of Lever is slightly different from NORMAL, but I soon got used to it.
Was the one you received as per Image?
Almost as Image.
Clutch lever is a little cheap in the Plastic part.
Was the installation difficult?
I am a beginner and it was very easy because there was a video of the exchange on Youtube.
I think anyone with 8mm and 10mm Wrench can do it.
How was your experience with it?
It looks good because we matched the color to the Fork and Wheel!
[Included Parts:were they on?
Grease is not included, so if you don't have it, you should buy it.
[Was there anything that disappointed you?
Plastic part of Clutch is cheap.
View detail
Fits: TRIUMPH Tiger (Feline, Panthera Tigris), KAWASAKI GPZ1100, KAWASAKI GPZ1100ABS, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZRX1100/II, KAWASAKI ZRX1200R/S, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZX-4, KAWASAKI ZX-9R, KAWASAKI ZXR400/R, KAWASAKI XANTHUS, SUZUKI DR350, SUZUKI GSF600, SUZUKI GSF600 S, SUZUKI GSF750, SUZUKI GSX-R750, SUZUKI GSX400 FSV, SUZUKI GSX600F
Response improved!
The tanks can only be removed and attached by shifting the tanks, so it is suitable for people who have done a lot of work on them!
However, considering the price, I think it is a recommendation replacement work if you can ride comfortably by replacing the Ignition coil earlier than the Manufacturer replacement distance.
View detail
Save money compared to buying at Rose!
The color stands out and gives it a custom feel, and as a manufacturer, I feel secure. I usually use OEM products, but I bought this product for fractional adjustment as well.
The quality and appearance were satisfactory.
View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R25, HONDA CBR250R, HONDA CBR250RR, YAMAHA TZ250, YAMAHA YZF-R25A, SUZUKI GSX250R, KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI Ninja250 SL, KAWASAKI Ninja250R, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z250, KAWASAKI Z250 SL, KTM RC125, KTM RC125, KTM RC250, YAMAHA MT03
Friction loss reduction was more than expected.
I had been using the usual Gold and Silver plating types, but the 250CC seemed to be able to handle city driving... View detail
I can really help. It is safe and secure.
It is safe because Hook does not move.
We recommend that you take a look at Jtrip's Channel on YouTube for a video showing how to use it.
Work is safe and secure.
View detail
Shape differs from the photo shown!
The photo shown here differs from the photo of the item sent to us.
The photo shows a slightly angled one with a split center, one side was Straight, so I bought it, but the one I sent is 90° right-angled, and the other side is a slightly slanted shape, which is totally different.
Only the color is the same in purple, Material seems to be resin and scratch resistant and looks good, but the shape is different from what I wanted. The price is not good.
View detail
Ideal for NAKED's Engine area!
As per the Title, it is ideal for cleaning around the Engine of Naked motorcycle!
I have been driving a GSX1400 motorcycle for 16 years. The front side of the engine is hard to clean because of the oil cooler, exhaust pipe, oil line, and oil filter, and I have half given up on cleaning it.
However, I didn't want to leave it like this, so I was looking for something better and found this.
I purchased this product expecting it to work as well as it looked, but it was even better than it looked!
The size is a little large and the core wire is hard, but that is good!
A 1400cc straight-4 Engine is wide, and being wide means that it takes a certain amount of force to shove Brush into it and scrub it.
LargeSize and hard core were exactly Exactly for my use.
Also, the core Wire is not very thick, so it will properly fit into the gap.
After washing the car using DAYTONA's Shampoo in combination with this, Engine has regained the beauty of its original black paint!
This is highly recommended for those who want to keep Naked motorcycle's Engine appearance beautiful!
View detail
Fits: YAMAHA XVS950CR, YAMAHA XV750, YAMAHA XV750E, YAMAHA SCR950, YAMAHA XV1100, YAMAHA Road Star (R100 ROADSTER), YAMAHA Drag Star (DRUG STAR), YAMAHA BOLT Shoulder Bag-R(A) (Bolt), YAMAHA BOLT Shoulder Bag-R(A) (Bolt), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA Drag Star (DRUG STAR), YAMAHA BOLT Shoulder Bag (Bolt), YAMAHA BOLT Shoulder Bag (Bolt)
OEM same etc.
No problems, same as OEM. This product is sufficient. No exhaust leaks. View detail
Fits: APRILIA GTV1000 CAPONORD (03), APRILIA RST1000 FUTURA, APRILIA RSV1000R FACTORY, APRILIA RSV1000, APRILIA RSV1000, APRILIA RSV1000, APRILIA RSV4, APRILIA SL1000 FALCO, APRILIA TUONO1000, APRILIA TUONO1000, APRILIA Tuono1000R, APRILIA Tuono1000R, BMW F800GS, BMW F800GS, BMW F800R, BMW HP4, BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000R
Standard but high quality?
Number of links on the OEM made it easy to work without the need for a cut.
The quality is naturally fine.
View detail