Reviews
good-looking
Color-coded by Size, it is easy to find the Size you need when working.
The high strength and precision of the Torque allows the Torque to be applied firmly without tampering.
The price is high, but well worth it.
View detail
Easy to use
The tip is sharp, and a light tap is all that is needed to firmly attach the mark.
If the Mark is shifted, the Drill hole will also be Large.
This product is very accurate and helpful.
Once you buy one, you won't be replacing it.
It is better to buy a good one from the beginning.
I can recommend this product.
View detail
watchman
I always buy this product.
It's expensive, but the tip is sturdy and fits the screw.
Very easy to use
We do have some thicker Grip products.
The force is easily applied when tightening, which can lead to overtorque.
I like this one just as much as the other one, which can be tightened just fine.
Grip has a distinctive smell, so tastes vary.
View detail
One and only
The world's standard slotted screwdriver.
Ordinary slotted screwdrivers have a tapered tip for ease of insertion, but PB's patented parallel surface finish on the tip of the tool allows it to fit perfectly with Minus screws for machines, many of which have parallel grooves.
Grip is like a rough rubber. I think it is not slippery, but there is not a sense of luxury at all.
It was just unpopular with the old Plug lip. "Ewoks." You don't have to worry about your toolbox getting smelly.
View detail
For Float pin removal etc.
The straightness of the pin is good and I use it to remove the Float pin when I overhaul the Carburetor. If the angle between the pin and the hammer is not good, the pin part may be bent by the force, but it is not broken and can be used by correcting the bend. The diameter of 1.5 or 2mm is very useful for Motorcycle. View detail
If you are looking for Caliper Overhaul, this is the 1 pc
There are many kinds of this kind of pick tool, but I think this form is the easiest to use for Caliper's Overhaul.
Scauper quickly into the Seal groove, twist to flip the Seal, then pull it out and you're done.
If you are working hard with Precision Driver and others, please Recommend this.
I think it's worth more than the price.
However, I think it's a bit pricey.
View detail
Size can be checked at a glance.
The Hexagonal Wrench is more expensive than the regular wrenches, but it is color coded by size so you can find the size you want at a glance. The strength of the wrench is high and you can put the torque firmly. View detail
Just fit
I bought this for my Carburetor Pilot Jet.
It was Just fit on a Mikuni BS34 Pilot Jet.
The tip of the blade is Straight to some extent, so it can reach the bottom of the Jet.
There is a slight rattle when turning, but I don't think the Jet will chip or anything.
It would be perfect if the thickness of the cutting edge was another 0.1?
The width is Exactly.
View detail
Expected
The hardness, the bite, it's great.
I have a preference, but I'm the first of this kind of Bit.
Some people may think it's too hard and will damage the Bolt, but I use it with the softer Snap on depending on the application.
View detail
The Grip can be easily removed.
You can easily remove the remaining Clips on the body side after removing the DoorLining etc. without damaging them. It is very convenient for you to use it with its easy to hold shape and length. View detail
Completely as a key holder
I haven't used this as a Bottle Opener yet, but I like the design and the texture, and it hangs as a key holder. View detail
It's easier to use than I thought it would be.
It's thicker than I expected, and it's well made and easy to use.
So it was heavier than it looked, but I use it as a Key Holder.
View detail
I bought it to adjust my glasses. I love it!
I bought it to tighten up my little Screw from Glasses.
I love it, I've never bought anything else from PB products.
This is the only way I can tell, but the common Chinese DriverKit looseness is not here, as it should be.
View detail
Is it good?
Because it is PB, the quality is high, but it is a little expensive. When you want to hang the torque, it is not suitable for you. Of course, it is a good driver, but when I think about the cost performance, I think that the Mega-Dora of Vessel is superior. View detail
Okay.
The famous PB slotted screwdriver has a parallel tip It has steps like this. It is easy to use, but it is not easy to damage it because it has no strength. If you want to damage it, you should prepare the driver for it. Time was twisted and the tip was broken. (Sad.) View detail
It's marked for electric power!
It can be used as an extension of the Bit although it is for electric power.
Originally, it should be aligned with Driver, but it's aligned with Bit and the length is not enough. I recommend it when.
However, it's a bit wobbly because it's spliced in.
View detail
Good accuracy
It is Firmly in the shape of a star with precision.
Because the appearance is also Colorful, and it is hard to rust, I think that the cost performance is better than buying a bad Bit. It is.
However, the first purchase Cost is high
Also, it's not compatible with the Bolt for theft response because Ana is not available.
View detail
PB is good
It doesn't have that distinctive PB smell!
If you use a lot of blades with one Grip, you can get a lot of blades
It can be changed into various drivers
View detail
Grip and Quantity:Set
Replacement Swiss Grip Screwdriver Handle and Quantity:I bought it as a set
I had to use a bit, so this will be a driver
Bit is cheaper than buying a bunch of Blade's
View detail
Good accuracy
That's a PB
It fits tightly into the hexagon with precision
It looks COLORFUL and rust-resistant, so it's better than cheaper wrenches
I think the costumes are good
However, the first purchase Cost is high
View detail