- Home
- Product reviews
- Tools
- Instrumentation Tools
- For Float pin removal etc.... (PB: Parallel Pin Punch Round Body)
【PB】Parallel Pin Punch Round Body Review
For Float pin removal etc.
The straightness of the pin is good and I use it to remove the Float pin when I overhaul the Carburetor. If the angle between the pin and the hammer is not good, the pin part may be bent by the force, but it is not broken and can be used by correcting the bend. The diameter of 1.5 or 2mm is very useful for Motorcycle.
สำหรับการถอดหมุดลอย ฯลฯ
ความตรงของหมุดนั้นดี และฉันใช้มันเพื่อถอดหมุดลูกลอยออกเมื่อฉันยกเครื่องคาร์บูเรเตอร์ หากมุมระหว่างหมุดกับค้อนไม่ดี ส่วนของหมุดอาจงอตามแรง แต่ไม่หัก และสามารถใช้แก้ไขส่วนโค้งได้ เส้นผ่านศูนย์กลาง 1.5 หรือ 2 มม. มีประโยชน์มากสำหรับรถจักรยานยนต์
Show originResponses
Other reviews
I think that some people took pains among those who attached the Radial-master Pump of the brembo to pull out the Spring pin which grasps when attaching a Switch to a Pump probably in a preparatory step, and is fixing the adjustment knob. Moreover,
I think that some people took pains among those who attached the Radial-master Pump of the brembo to pull out the Spring pin which grasps when attaching a Switch to a Pump probably in a preparatory step, and is fixing the adjustment knob.
Moreover, work finishes on the dot in comfort in case of the tool carried out perfectly too.
If it is used by removal of the adjustment knob of the
Radial master, a tip will think that it is a Just size to the Punch which is 1.5 mm.
although the goods of 1 mm here were used this time [
], the inside of a Spring pin is entered a little, and I come out and think that
which was slightly dreadful, however the thing situation are the things which a pin spreads and meets and whose intensity may suit very.
View detail