Reviews
It's not Kang Tan, right? LOL!
In the product name Kang Tan." but it is not such a kantan to be installed on ELIMINATOR 400.
I don't mean difficult, I mean tedious lol.
To begin with, the problem is on the body side, but the Tank has to be removed in order to install the 4-poleRelay.
This is a pain in the ass, lol.
The product itself is solid, and the Harness fits inside the MeterCowl, so it is a good reflection.
I think it will be around the Handlebar when the retrofit USB Socket is installed, so it will be easy to handle the Wiring! (,,> <,,)
As mentioned earlier, the product received a perfect score except for the 4-poleRelay installation.
View detail
Fits: YAMAHA SDR200, YAMAHA DT200WR, YAMAHA DT230, YAMAHA DT230 LANZA, YAMAHA BRONCO ST225, YAMAHA TT250R, YAMAHA TT250R RAID RAID, YAMAHA XT225 SEROW225, YAMAHA XT250 SEROW250, YAMAHA XT250X, YAMAHA R1-Z, YAMAHA TDR250, YAMAHA TZR250, YAMAHA XG250 XG250 TRICKER, YAMAHA VIRAGO250, YAMAHA FZR250, YAMAHA FZX250 FZX250 ZEAL, YAMAHA RZ250R, YAMAHA SRX400, YAMAHA FZR400
To match Lithium ion battery
The Lecti Fire a&Regulator I was using broke and could no longer charge the Lithium ion battery, so I replaced it with a suitable one.
We will not know until we use it with a lithium ion battery for a number of years to see if it is durable enough for the price, but the voltage is stable at about 14.5V after replacement.
View detail
Fits: YAMAHA MT03, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA MT-25
Judder may be less.
It has been running close to 50,000 km, so we installed it together with the replacement of the Clutch board.
The clutch spring was also newly installed, and after assembly, there is no extreme large change in the running feel, but the slight vibration seems to have been reduced.
I may change Fee Ring in the future as I get more comfortable with Clutch, but so far I have no complaints.
It was easy to install and I'm glad I bought it.
View detail
Fits: HONDA CB750F, HONDA CB1100R, HONDA CBX1000
OEM and length was different.
I bought it because it's hollow and it's by Vito, but it's shorter than OEM and I can't install it on my footpeg.
I didn't see it in the description, so here it is.
View detail
Easy to customize
Double-sided tape is all that is needed, so anyone can easily attach it.
The price is cheap, so I bought it thinking it would be okay if it failed, but it feels and looks great!
View detail
Fits: DUCATI 1199PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI 1299PANIGALE, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE S, DUCATI 848, DUCATI 848 EVO, DUCATI 899PANIGALE, DUCATI 959PANIGALE, DUCATI DIAVEL, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER1100EVO, DUCATI MONSTER1200, DUCATI MONSTER1200S, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER821
Helpful in preventing Prank
It looks better than the OEM resin cap and requires a hexagonal wrench to open and close, but there is no oil level gauge, so the OEM cap must be kept in stock. View detail
No discomfort when walking around town.
It is comfortable to walk around town.
It is quite a beautiful design. Not too many people wear it.
Although it is solidly built, walking, shifting, and rear brake operation can be performed comfortably.
I usually wear SneakersSize 26.5CM, 42 was the right size for this shoe.
View detail
Protection as good as Short Boots
Was the one you received as per Image?
I liked the very Sporty appearance, which is typical of ALPINESTARS.
[How did you feel about the Fit?
It is an interior that even I, a Japanese person, often Fit.
How was your experience with it?
Even a super sports bike has the protection that makes it seem sufficient for a little touring.
View detail
Pre-installation impression
The Instruction Manual was not included in the package, but can be found on the product page of the official ENDURANCE website. It is recommended to check the contents before purchasing.
The product is made of steel sheet gold, so it does not have a luxurious feel, but the machining precision and the texture of the paint are good, and it does not look so cheap.
The ENDURANCE Logo is a Sticker, so you don't have to put it on if you don't need it.
Low head cap bolt for Case mounting (M6, hexagon socket) and HexalobularBolt for fixing the lid (M5) was included in the package.
Hexalobular (Torque) was supplied with a Wrench, but a 3mm Hexagonal Wrench and 10mm Spanners are required to tighten the Cap bolt.
To store the ETC in the Case, simply affix a protective sponge tape to the Case and place it inside.
Since this is a universal product, it is necessary to arrange an appropriate bracket separately for installation on the car body.
The dimensions of the holes available for installation were described in the Instruction Manual for handling.
The case does not have waterproof or dustproof features, but I think this is sufficient because it prevents direct exposure to rain in addition to the waterproof feature on the ETCBody side.
In general, it is sufficient for my needs, but I feel that the price is a bit expensive since there are many other with-key products available for a little more money.
View detail
dirt prevention
The fabric is Polyester.
It is not lined, so it is not expected to be waterproof like Tarpaulins fabric.
The cover area covers the front and four sides of the bag. Due to its structure, the back of the bag can be covered only slightly.
It is a special product, so the fit to the bag is good. There is no worry that it will come off while driving.
Older types could be identified top and bottom by looking at the Logo, but the current product has no Logo printed on it, so it is necessary to check the position of the drainage hole.
The quality and texture is neither good nor bad.
View detail
A little heavy?
It is no longer a standard product. lol
The drawback is that the Material is heavy because it is steel.
Backrest and Engine Guard and Quantity sold by the company for ELIMINATOR 400:A whopping 10kg increase when installed with 1 Set of 3-items!
It's not only the push/pull, but it also affects the ride a bit! That's what I'm thinking. (Polish)
However, it is a must-have item to attach the side bag, so it is attached.
The product itself is well made and has a nice paint job.
It does not seem to be Rust if you don't scratch it.
If the material was Stainless Steel or something like that, I would give it 5 stars. (Polish)
View detail
JetSetting
Since it is a KEIHIN OEM, it is safe to use.
I lost it and purchased it, even though I adjust it based on temperature and humidity.
View detail
Batch!
Was the ELIMINATOR 400 Bracket prepared for the purpose of attaching this? It fits so perfectly that you may wonder if you prepared the Bracket to put it on.
BoltQuantity is also installed by removing the Side Panel.:Easy installation by simply fastening with 2pcs.
It is also nice to use, so I think it is a good product to install. (,,> <,,)
However, if the Key is Quantity:It's going to be 2 pc...
(OEM keys and keys specific to this product)
Well, that's the same with other cars, so it can't be helped lol.
View detail
Gloves with high hand freedom and high protection
Was the one you received as per Image?
It looks cool anyway.
[How did you feel about the Fit?
The material itself is thin and has an excellent fit.
How was your experience with it?
It fits very comfortably in the hand and is easy to operate.
[Notes]
The first time I put it on, it hurt a little around my fist, so I recommend actually trying it on.
View detail
Style
I think Material and Style are good.
The crotch is shallow as you mentioned in your Impression, which is just right for me. (MW30-36Inch) The response is too broad and I would like it to be more separated.
View detail
Fits: KAWASAKI Ninja ZX-4R SE, SUZUKI V STROM 250SX
Convenient locking by pushing in
The simple shape, light weight, and compact design are also good.
I use it with another Manufacturer's Chain at home and as a Disc Lock with Single Body when I am on the road.
Rubber lids are sold as Repair Parts and may be purchased in advance.
View detail
Fits: YAMAHA XSR700, YAMAHA XSR700, YAMAHA XSR700
Good product.
This single pole locks the Porch columns and two Motorcycles together.
One end has a Ring and another Ring is attached, so the length of the Chain can be used effectively.
The Chain itself is of standard construction, but I would recommend it because of its length for the price, which, together with the aforementioned points, makes it easy to handle and to use the so-called "earth lock".
I have no complaints about the Pad lock that comes with it in terms of functionality, but the Body is Material:Plastic and cheap looking and may be somewhat less secure. (I use another lock that I have on hand.)
View detail
Lightweight and strong wire lock
[How is it used?
It is used in conjunction with the Ring of the genus Gold, which is buried in the ground in the parking lot of Apart.
How was your experience with it?
1.It is lightweight for its length of 5 m, so it is easy to clean up.
View detail
A little relief on rainy days
I had only used the Net type, but after using it, I was impressed with the convenience of the Large type.
Loaded cargo is inconspicuous
No gaps to protrude
Large sturdy enough for a little bit of rain.
More compact than Net type when stored
I bought a Large size thinking that a Large would also be a Small!
Can wrap a full size helmet completely.
View detail
Universal and easy to use
Material:Stainless Steel 8mmCap bolts are available at Home center in various lengths (about 150 yen per pc).
Even if it is not a car-specific product, this one from Universal was sufficient for me.
Also, there is no extra Logo, etc., which is nice and clean.
View detail