Reviews
I just wanted to put this on...
Taichi's jacket RSJ726 Monster All Season Parka has elbow and knee pads, but damage to the chest, as indicated by the number two mortality rate after the head, Chest protector However, I didn't like the weight of the separate model (TRV079 Lynx Separate Chest Protector), and I didn't like the hassle of attaching and detaching the integrated model (TRV063 TECCELL Chest Protector). I didn't like the weight of the TRV079 Lynx Separate Chest Protector (TRV079 Lynx Separate Chest Protector), and I didn't like the hassle of attaching and removing the integrated model (TRV063 TECCELL Chest Protector), and the split model (TRV067 TECCELL Separate Chest Protector) seemed the best.
While the above three products are CE StandardLevel2, this is a lower grade. Level 1 compliant So, although it may be less robust, I decided to try this Balance because the softer one will definitely be more comfortable in driving conditions anyway.
It is exactly the same as 3Snap buttonType in Thailand. Pushing at the time of impact and instant hardening! and Fit your body with instant hardening soft fit! I believe it is a good sense of balance, if you believe in that point!
View detail
DP-001 Cut-resistant Slim fitInner protector with
It is attached to the chest of the cut-resistant Slim fitInner protectorDP-001.
It is thin and soft, so there is little discomfort.
CE StandardLevel 1.
View detail
Cospa best
[How is it used?
I compete in Enduro competitions and wear Protector as my primary inner. I used to wear a Leatt 5.5 but it is getting old so I decided to replace it.
Was the one you received as per Image?
As per Image
How was your experience with it?
The plastic is very thick and has good protection. The BALI is also very strong and does not seem to peel off easily.
A portion of the back can be easily removed, making it easy to attach the neck brace. The lower back can also be removed for ease of movement.
And above all, it is a protection for the flanks. Many of the recent Protector products do not have protection for the flanks, perhaps because of the emphasis on lightweight and ease of movement. This product is well protected on the flanks, so even if you bump it when you fall down, the Damage will be reduced to a Large width.
How did it compare to other products?
Although it is inferior in breathability and weight compared to high-end models from other manufacturers, it is a very good product at this price.
Other items that would be helpful
The adjustment range around the girth is not very wide, so thinner or fatter people may have trouble adjusting. Be thin or fat.
View detail
Considerable comfort has been achieved since the last product Chest Protector
[How is it used?
The company's past products SAS-TEC Chest Protector CP-2 Body Only Item No.:94856 This is a Replace from
Was the one you received as per Image?
It was softer than I had imagined and flexible enough that even if I held it horizontally anywhere, it would not be level.
The Image is a shape-like SAS-TEC resin on a resistant fabric.
How was your experience with it?
The company's past products were thicker and a little stiffer, so when I put them in my Jacket and stretched my chest, I felt like a muscle breast plate ghost, and it was uncomfortable to hit my chest again. I am very happy with it.
And since they are thin, I am very happy that I don't have a muscle chest plate ghost.
[Points to note]
Although it is still a little uneasy at heart compared to the complete HardProtector, it is very comfortable considering the previous company's SAS-TEC as a standard. I am glad I bought it.
How did it compare to other products?
I don't know because I don't use other companies' products.
[Others]
I feel that the softness and fit are so comfortable that I would like to replace the SAS-TEC for Knee with the SAS-TEC for Shoulder and Elbow.
View detail
Unplanned purchase to match Alpinestars Jacket
I bought the RX-3Jacket, but was reluctant to buy it because the Chest Protector that often comes with Komine Jackets did not fit in it as it was (ugh).
I'm not sure about the protection, as I've never mocked it up, but it feels somewhat unassuring. It is comfortable to wear.
The Large size is too Exactly and I thought I made a mistake in the size at first. I thought I got the size wrong at first.
View detail
Equipment that can reliably protect the upper body
I chose this equipment because I had suffered a hard blow to my shoulder when I fell down and hit my chest in agony when I stumbled.
So far I have not fallen down using it, but compared to the 4.5 I used before, Shell's protection is indeed harder and thicker, especially in the chest and abdomen area.
4.While the Handlebar 5 was flexible enough to flex the abdomen and chest when leaning on the Handlebar, this one maintains the original shape of the entire structure and feels as if it is supported by the entire surface, without any localized pressure.
The Image is such that the Protector itself keeps its shape and protects the people inside.
The interior cushion material is also designed to be appropriate for the grade, and there is no concern that the surface fabric will peel off after repeated use and washing.
If there is a problem...
The price of enhanced defense is that upper body mobility is more restricted than in other grades.
To be an inner protector, it should be massive and wearable. (Not possible depending on your physique)
The lock of the Belt on the flank that connects the front and back is stiff. (Pushing is not a common type of buckle, but a solid gold clasp made of gold, which can be pushed in with a little force after being hooked.)
Although it is the highest grade in terms of series at the moment, other grades may be better depending on the environment and riding style, so we hope you can compare them and make a good choice.
View detail
Added to Rough Parka for a little ride.
It is additionally attached to Rough Parka RR7234.
I think Rough&Road's Jacket would have Standard Equipment or Mounted Space.
The shape of the place where the Parts to be protected (back, shoulders, elbows, chest) are placed is the same.
See Catalogue for details.
I used to share Hard Type RR10074 with RR7001 Gore-TexTrekJacket.
I purchased an addition to my Parka for street riding.
The protection is 4 stars compared to RR10074.
Compared to a full-scale product, the Level is better than nothing.
View detail
It was Exactly in workman's Mesh jacket!
It was Exactly in workman's 2023MODEL mesh jacket.
Large Variety Satisfaction
View detail
For Jacket without Chest Protector
I use KUSHITANI's Chest Protector with Komine's Chest ArmourAdapter connected to this fitting belt.
By doing so, even if you originally wear a Jacket without Chest Protector setting, or if you buy a new Jacket and cannot prepare a corresponding Chest Protector, you will be able to wear a solid Chest Protector.
However, it has the advantage of being fitted to the body more comfortably than a Jacket with a Chest Protector, but it also has the disadvantage that the contact point between the Belt and Protector gets sweaty in the summer.
View detail
Looks effective.
Normally soft, hardens upon impact….
I tried it!
When I gouged it with something hard, it got hard!
The area is smaller than expected, but I believe that the acute areas are protected.
View detail
OEM Product is required
We are using an Alpinestars Jacket with a Type that attaches the Protector with a Button.
At first, I tried to attach a Komine Protector, but it did not fit due to a difference in the standard of the button.
If you want to use Protector as an integral part of Jacket, you have no choice but to put this on.
The texture is high and has some breathability.
It is CE2 standard, which provides peace of mind.
View detail
I should have used it sooner.
I broke many ribs in a Solo touring accident in July. Learning from my injury, I bought the Breast Pad for touring and it seems to work well for KUSHITANI and DFG. I should have bought it earlier. View detail
Purchase for tandem
I knew the importance of the chest protector, but I bought it because it was not included in the Daytona mesh jacket I purchased this time. It's one size fits all, so it's a bit tight for a small size jacket. It is said that the tandem chair did not feel very uncomfortable. I recommend it. -------------------------------------------------- -------- I knew the importance of the chest guards, but this time I bought it because it was not included in the mesh jacket. The size is one size, so the small size jacket has a little tight feeling. It is recommended that Tendemja did not feel very uncomfortable. Powered by Google Translator View detail
I attached it to a Mesh jacket from Kuhl Lace Miss.
I attached it to a Mesh jacket from Kuhl Lace Miss.
Cutting is required, but can be easily done with scissors.
Although the protection is better than nothing, it is not as good as nothing at all.
View detail
Relief
It seems to be strong but not too large, so I think it will go well with thin summer wear. View detail
I want to put this in the chest ProtectorPocket of the Mesh jacket.
Even if I wear a mesh jacket in summer, it is hot when I put on Protector. I bought this as a countermeasure.
I bought the L Size and am using it in my Rough & Road Mesh Jacket RR7313. (The chest Protector of Laflo is fixed not to move because of its vertical length.)
Comparison is made with the following three Mesh protectors.
(The common flimsy mesh protector without CE is better than no mesh protector, so it is not included in the comparison.)
◆Comparables
・Komine SK-831 (one body Type CELevel2)
・Icon GUARD D3O LP1 CHEST (one body Type CELevel 1)
・DAYTONA SAS-TEC CP-2 (Split Type CELevel 1)
◆window street
The airflow is unquestionably the best, similar to Icon D30, but the split type has less area to protect than the integrated type, so the airflow is better. In return, the safety is not as good as the integrated type, so it's a matter of which one you take.
The Mesh portion is wider, thinner, and firmer, so it does not follow the skin easily and floats easily. I think this is the reason why it feels so airy.
◆Safety
Its defensive rank in Total is second only to KomineSK-831.
CELevel2, although a split type, is not particularly thick and thinner than DAYTONASAS-TEC CP-2, but CELevel2 is amazing.
The KomineSK-831 has a prominent defense at the expense of weight and thickness, so it's no wonder it loses out to this one.
By the way, it is a little hard resin, but it bends easily if you bend it. But when you tap it, it is quite hard.
I think this is Level2, but it's a standard set by people smarter than me. It must be more correct than my own sensibilities.
Well, DAYTONASAS-TEC and IconD3o are more squishy, so they seem safer. (Both CELevel 1)
Of course, this is a sense of security that cannot be compared to the flimsy, non-standardized mesh protector.
◆ Weight
Quantity:Pair (for Left and Right) and weighs about 300g. In order of lightest to lightest, DAYTONACP2 (155g) 、IconD3o (206g) This. (300g) 、Komine (650g) 。
DAYTONA is light - half the weight. 300g is heavy! I don't feel it's heavy if it's about 300g, but it feels a little heavy when I open the fastener of Jacket.
ChestPocketQuantity:Pair (for Left and Right) It would be easier to understand if I say that it is like putting a smartphone in a
General Comment
Quantity in summer:Pair (for Left and Right) This NUCLEON FLEX PRO Ci is the best choice to put in the Mesh jacket with ProtectorPocket.
CELevel and price, breathability, thickness, softness, all good. The only drawback is that it is a little heavy....
It has a strong and unique scent like a perfume and is used as a substitute for air freshener in Jacket.
By the way, the following is a list of applications.
For cheap price = DAYTONACP-2
Emphasis on defense and coolness = KomineSK-831
I want to wear Slim with a good integrated shape = IconD3o
View detail
Plus peace of mind.
Purchased this for a Mesh jacket of the same Brand. It protects not only the upper part of the chest but also the whole chest, so I feel more secure. I was a little worried because the price was so low, but when I saw the product in the mail, I thought it was surprisingly well made and would be sufficient. It fits the jacket perfectly and is easy to put on. View detail
Chest Protector should be equipped
Since I use both KUSHITANI and Thailandichi's Wear, I think this Protector is cost-effective for both.
If running, Protector also allows air to pass through without steaming.
After getting off the Motorcycle, it feels somewhat obtrusive, but when riding it does not feel uncomfortable.
In addition, since it is a Button and Surface Fastener, installation is easy.
I think it is worth buying Chest Protector because it is low-priced and easy to equip. It is definitely safer to have it than not to have it.
View detail
I need a little more R.
It is thin and light, but it is too flat overall, and in my case, I don't feel much Fit.
Maybe if you are a skinny person?
View detail
Purchased for insurance purposes in case of emergency
[How is it used?
Purchased for Summer jacket from Laflo
Was the one you received as per Image?
Yes
How was your experience with it?
Not as sturdy as Hard Type, but installed for insurance purposes.
[Points to note]
It is soft, so some people may feel uneasy.
In that case, you might want to buy a Hard Type Chest pad.
How did it compare to other products?
I only have OEM.
If you plan to purchase Protector later, you may want to purchase a full Protector jacket from Raflo.
View detail