Reviews
For WORKMAN's Jacket.
It is a little too Large for WORKMAN's Mesh jacket, but this is not a problem as it can be easily cut with Scissors.
Of course, I think it can be attached to RoughAndRoad's Jacket with no problem, but I don't know because I don't have it.
View detail
Cospa best
[How is it used?
I compete in Enduro competitions and wear Protector as my primary inner. I used to wear a Leatt 5.5 but it is getting old so I decided to replace it.
Was the one you received as per Image?
As per Image
How was your experience with it?
The plastic is very thick and has good protection. The BALI is also very strong and does not seem to peel off easily.
A portion of the back can be easily removed, making it easy to attach the neck brace. The lower back can also be removed for ease of movement.
And above all, it is a protection for the flanks. Many of the recent Protector products do not have protection for the flanks, perhaps because of the emphasis on lightweight and ease of movement. This product is well protected on the flanks, so even if you bump it when you fall down, the Damage will be reduced to a Large width.
How did it compare to other products?
Although it is inferior in breathability and weight compared to high-end models from other manufacturers, it is a very good product at this price.
Other items that would be helpful
The adjustment range around the girth is not very wide, so thinner or fatter people may have trouble adjusting. Be thin or fat.
View detail
Considerable comfort has been achieved since the last product Chest Protector
[How is it used?
The company's past products SAS-TEC Chest Protector CP-2 Body Only Item No.:94856 This is a Replace from
Was the one you received as per Image?
It was softer than I had imagined and flexible enough that even if I held it horizontally anywhere, it would not be level.
The Image is a shape-like SAS-TEC resin on a resistant fabric.
How was your experience with it?
The company's past products were thicker and a little stiffer, so when I put them in my Jacket and stretched my chest, I felt like a muscle breast plate ghost, and it was uncomfortable to hit my chest again. I am very happy with it.
And since they are thin, I am very happy that I don't have a muscle chest plate ghost.
[Points to note]
Although it is still a little uneasy at heart compared to the complete HardProtector, it is very comfortable considering the previous company's SAS-TEC as a standard. I am glad I bought it.
How did it compare to other products?
I don't know because I don't use other companies' products.
[Others]
I feel that the softness and fit are so comfortable that I would like to replace the SAS-TEC for Knee with the SAS-TEC for Shoulder and Elbow.
View detail
Added to Rough Parka for a little ride.
It is additionally attached to Rough Parka RR7234.
I think Rough&Road's Jacket would have Standard Equipment or Mounted Space.
The shape of the place where the Parts to be protected (back, shoulders, elbows, chest) are placed is the same.
See Catalogue for details.
I used to share Hard Type RR10074 with RR7001 Gore-TexTrekJacket.
I purchased an addition to my Parka for street riding.
The protection is 4 stars compared to RR10074.
Compared to a full-scale product, the Level is better than nothing.
View detail
It was Exactly in workman's Mesh jacket!
It was Exactly in workman's 2023MODEL mesh jacket.
Large Variety Satisfaction
View detail
![[Honda x RS TAICHI] Tech Cell Chest Fitting Belt for Protector](https://img.webike-cdn.net/catalogue/images/42129/0SYTP-X9A_01FS_K_TS.jpg)
For Jacket without Chest Protector
I use KUSHITANI's Chest Protector with Komine's Chest ArmourAdapter connected to this fitting belt.
By doing so, even if you originally wear a Jacket without Chest Protector setting, or if you buy a new Jacket and cannot prepare a corresponding Chest Protector, you will be able to wear a solid Chest Protector.
However, it has the advantage of being fitted to the body more comfortably than a Jacket with a Chest Protector, but it also has the disadvantage that the contact point between the Belt and Protector gets sweaty in the summer.
View detail
Looks effective.
Normally soft, hardens upon impact….
I tried it!
When I gouged it with something hard, it got hard!
The area is smaller than expected, but I believe that the acute areas are protected.
View detail
Purchase for tandem
I knew the importance of the chest protector, but I bought it because it was not included in the Daytona mesh jacket I purchased this time. It's one size fits all, so it's a bit tight for a small size jacket. It is said that the tandem chair did not feel very uncomfortable. I recommend it. -------------------------------------------------- -------- I knew the importance of the chest guards, but this time I bought it because it was not included in the mesh jacket. The size is one size, so the small size jacket has a little tight feeling. It is recommended that Tendemja did not feel very uncomfortable. Powered by Google Translator View detail
![NUCLEON FLEX PRO Ci [New Cleon FLEX PRO Ci] Protector](https://img.webike-cdn.net/catalogue/images/86755/6702121-114-fr_nucleon-flex-pro-ci-protector-right_TS.jpg)
I want to put this in the chest ProtectorPocket of the Mesh jacket.
Even if I wear a mesh jacket in summer, it is hot when I put on Protector. I bought this as a countermeasure.
I bought the L Size and am using it in my Rough & Road Mesh Jacket RR7313. (The chest Protector of Laflo is fixed not to move because of its vertical length.)
Comparison is made with the following three Mesh protectors.
(The common flimsy mesh protector without CE is better than no mesh protector, so it is not included in the comparison.)
◆Comparables
・Komine SK-831 (one body Type CELevel2)
・Icon GUARD D3O LP1 CHEST (one body Type CELevel 1)
・DAYTONA SAS-TEC CP-2 (Split Type CELevel 1)
◆window street
The airflow is unquestionably the best, similar to Icon D30, but the split type has less area to protect than the integrated type, so the airflow is better. In return, the safety is not as good as the integrated type, so it's a matter of which one you take.
The Mesh portion is wider, thinner, and firmer, so it does not follow the skin easily and floats easily. I think this is the reason why it feels so airy.
◆Safety
Its defensive rank in Total is second only to KomineSK-831.
CELevel2, although a split type, is not particularly thick and thinner than DAYTONASAS-TEC CP-2, but CELevel2 is amazing.
The KomineSK-831 has a prominent defense at the expense of weight and thickness, so it's no wonder it loses out to this one.
By the way, it is a little hard resin, but it bends easily if you bend it. But when you tap it, it is quite hard.
I think this is Level2, but it's a standard set by people smarter than me. It must be more correct than my own sensibilities.
Well, DAYTONASAS-TEC and IconD3o are more squishy, so they seem safer. (Both CELevel 1)
Of course, this is a sense of security that cannot be compared to the flimsy, non-standardized mesh protector.
◆ Weight
Quantity:Pair (for Left and Right) and weighs about 300g. In order of lightest to lightest, DAYTONACP2 (155g) 、IconD3o (206g) This. (300g) 、Komine (650g) 。
DAYTONA is light - half the weight. 300g is heavy! I don't feel it's heavy if it's about 300g, but it feels a little heavy when I open the fastener of Jacket.
ChestPocketQuantity:Pair (for Left and Right) It would be easier to understand if I say that it is like putting a smartphone in a
General Comment
Quantity in summer:Pair (for Left and Right) This NUCLEON FLEX PRO Ci is the best choice to put in the Mesh jacket with ProtectorPocket.
CELevel and price, breathability, thickness, softness, all good. The only drawback is that it is a little heavy....
It has a strong and unique scent like a perfume and is used as a substitute for air freshener in Jacket.
By the way, the following is a list of applications.
For cheap price = DAYTONACP-2
Emphasis on defense and coolness = KomineSK-831
I want to wear Slim with a good integrated shape = IconD3o
View detail
Chest Protector should be equipped
Since I use both KUSHITANI and Thailandichi's Wear, I think this Protector is cost-effective for both.
If running, Protector also allows air to pass through without steaming.
After getting off the Motorcycle, it feels somewhat obtrusive, but when riding it does not feel uncomfortable.
In addition, since it is a Button and Surface Fastener, installation is easy.
I think it is worth buying Chest Protector because it is low-priced and easy to equip. It is definitely safer to have it than not to have it.
View detail
Thin, lightweight, and inexpensive
[How is it used?
I purchased the soft protector for touring, winding, and highway use because I thought the original soft protector would not be safe enough.
Was the one you received as per Image?
It was just like the Image as shown in the product picture and Review.
How was your experience with it?
It is thin, and the fit is good because it is bent to follow the ribs. The weight does not bother you once you put on the Jacket.
[Points to note]
Note that this is not CE Standard compliant, so be careful if you care about it.
How did it compare to other products?
The plastic part is quite perePera, so the actual defense performance may be a little inferior.
【Review】
Considering the defensive performance that seems to be sufficient at the public road level, the lightweight and thin fit among hard protectors, and the price, I think the cost performance is quite good.
View detail
Satisfied
It's a hassle to put Chest Protector on every time.
So, I was looking for a size that would fit in the chest pocket of my Jacket.
As expected, it is the same Manufacturer, so it is a Just fit!
I think it is less secure than the separate type, but I took the ease!
View detail
It's properly cured!
I am not sure about the Protector that comes with the company's Coach jacket as I see it, I don't care if the price goes up, just make this Standard Equipment." I bought it thinking that it was a good idea.
It feels like a very hard, low-resilience material, but when the temperature is high or warmed by body heat, it softens and becomes less sticky and uncomfortable. It is a strange protector that becomes stiff and pushes when it is subjected to impact. I am sure that this is the case, because my hand hurt when I hit it as hard as I could.
I will continue to use it, hoping that it will not be taken care of.
View detail
Flexible
[How is it used?
It is combined with KUSHITANIJacket.
Was the one you received as per Image?
This was my first time with Chest Protector and I thought it was lumpier than I expected.
If you are used to it, it may feel normal.
How was your experience with it?
The sense of security is not so great because there is a board that seems to be highly defensive where there was none before.
How did it compare to other products?
The fact that it has both a Snap button and Magic tape dramatically improves usability.
I think it can be used for most Motorcycle Jackets.
In addition to Universality, it is more cost-effective than other Manufacturers.
If you don't like Yamaha, I think this is fine.
View detail
It was as expected.
Easy to buy and made by YAMAHA.
I purchased this for my KUSHITANI Vector Jacket, but it can be easily attached to other jackets by sewing on the Surface Fastener.
View detail
Used for DEGNER's Jacket
I tried upgrading my DEGNER flight jacket with a Standard Equipment Protector. The size is almost the same and it fits in the ProtectorPocket without any difficulty. I'm glad I wore it!" We will strive to drive safely so that there are no View detail
good chest protector
I bought this DAYTONA SAS-TEC chest protector to equip it on the NANGA AURORA-TEX jacket I bought before. I thought that this chest protector would come with the jacket, but it turned out to be optional. This chest protector It is usually soft, but when it encounters an impact, it will harden instantly to protect my body. -------------------------------------------------- -------- Buying this Daytona Sas-TEC breast protection is to put it on the Nanga Aurora-TEX jacket that was purchased before. I thought it would be attached to the jacket before the jacket. As a result, it needs to be selected. It is usually soft, but when I encounter impact, I will instantly harde my body. Powered by Google Translator View detail
Y's Gear (Yamaha) Chest Protector
I purchased this Chest Protector to attach to my KUSHITANI Anifesto Jacket, but it was too expensive for me. I decided to choose Y's Gear's Chest Protector because of its brand name and safety.
If you use a type with Magic tape at the center of KUSHITANI, you can easily install it and leave it in place without any problem.
If you normally use a backpack or similar, there should be no problem storing it in your backpack after you get off the Motorcycle.
Since the zipper is tightened while driving, the white YAMAHAMark is completely hidden; even if you walk around town with the zipper open, the YAMAHAMark is barely visible, so you can wear it without worrying about it. At this price range, it is Reasonable in case of loss, easy to handle, and a good charm in case of emergency.
Quantity, although it does not come to the side.:Quantity as Chest Protector for 1pc.:1 pc. I think it would be good to have it.
View detail
Change Protector
I purchased this product to attach it to Komine's Inner protector SK-693 sSize. It is a little smaller than the existing Komine protector, but it can be installed. It looks a little cleaner. I would like to purchase one for my other Jacket. View detail
Cosmetic but universal nature is…
I think it is a Protector that hardly fits unless it is a Jacket made by RoughAnd.
However, it is a Hard Type with a wide protective range and good cost performance.
I am using a DEGNER mesh jacket with a self-made pocket for Protector.
I gave it 3 stars for protection because I have never been protected by a fall, but I'm hoping for the best.
View detail