Reviews
Considerable comfort has been achieved since the last product Chest Protector
[How is it used?
The company's past products SAS-TEC Chest Protector CP-2 Body Only Item No.:94856 This is a Replace from
Was the one you received as per Image?
It was softer than I had imagined and flexible enough that even if I held it horizontally anywhere, it would not be level.
The Image is a shape-like SAS-TEC resin on a resistant fabric.
How was your experience with it?
The company's past products were thicker and a little stiffer, so when I put them in my Jacket and stretched my chest, I felt like a muscle breast plate ghost, and it was uncomfortable to hit my chest again. I am very happy with it.
And since they are thin, I am very happy that I don't have a muscle chest plate ghost.
[Points to note]
Although it is still a little uneasy at heart compared to the complete HardProtector, it is very comfortable considering the previous company's SAS-TEC as a standard. I am glad I bought it.
How did it compare to other products?
I don't know because I don't use other companies' products.
[Others]
I feel that the softness and fit are so comfortable that I would like to replace the SAS-TEC for Knee with the SAS-TEC for Shoulder and Elbow.
View detail
![[Honda x RS TAICHI] Tech Cell Chest Fitting Belt for Protector](https://img.webike-cdn.net/catalogue/images/42129/0SYTP-X9A_01FS_K_TS.jpg)
For Jacket without Chest Protector
I use KUSHITANI's Chest Protector with Komine's Chest ArmourAdapter connected to this fitting belt.
By doing so, even if you originally wear a Jacket without Chest Protector setting, or if you buy a new Jacket and cannot prepare a corresponding Chest Protector, you will be able to wear a solid Chest Protector.
However, it has the advantage of being fitted to the body more comfortably than a Jacket with a Chest Protector, but it also has the disadvantage that the contact point between the Belt and Protector gets sweaty in the summer.
View detail
Looks effective.
Normally soft, hardens upon impact….
I tried it!
When I gouged it with something hard, it got hard!
The area is smaller than expected, but I believe that the acute areas are protected.
View detail
Purchase for tandem
I knew the importance of the chest protector, but I bought it because it was not included in the Daytona mesh jacket I purchased this time. It's one size fits all, so it's a bit tight for a small size jacket. It is said that the tandem chair did not feel very uncomfortable. I recommend it. -------------------------------------------------- -------- I knew the importance of the chest guards, but this time I bought it because it was not included in the mesh jacket. The size is one size, so the small size jacket has a little tight feeling. It is recommended that Tendemja did not feel very uncomfortable. Powered by Google Translator View detail
![NUCLEON FLEX PRO Ci [New Cleon FLEX PRO Ci] Protector](https://img.webike-cdn.net/catalogue/images/86755/6702121-114-fr_nucleon-flex-pro-ci-protector-right_TS.jpg)
I want to put this in the chest ProtectorPocket of the Mesh jacket.
Even if I wear a mesh jacket in summer, it is hot when I put on Protector. I bought this as a countermeasure.
I bought the L Size and am using it in my Rough & Road Mesh Jacket RR7313. (The chest Protector of Laflo is fixed not to move because of its vertical length.)
Comparison is made with the following three Mesh protectors.
(The common flimsy mesh protector without CE is better than no mesh protector, so it is not included in the comparison.)
◆Comparables
・Komine SK-831 (one body Type CELevel2)
・Icon GUARD D3O LP1 CHEST (one body Type CELevel 1)
・DAYTONA SAS-TEC CP-2 (Split Type CELevel 1)
◆window street
The airflow is unquestionably the best, similar to Icon D30, but the split type has less area to protect than the integrated type, so the airflow is better. In return, the safety is not as good as the integrated type, so it's a matter of which one you take.
The Mesh portion is wider, thinner, and firmer, so it does not follow the skin easily and floats easily. I think this is the reason why it feels so airy.
◆Safety
Its defensive rank in Total is second only to KomineSK-831.
CELevel2, although a split type, is not particularly thick and thinner than DAYTONASAS-TEC CP-2, but CELevel2 is amazing.
The KomineSK-831 has a prominent defense at the expense of weight and thickness, so it's no wonder it loses out to this one.
By the way, it is a little hard resin, but it bends easily if you bend it. But when you tap it, it is quite hard.
I think this is Level2, but it's a standard set by people smarter than me. It must be more correct than my own sensibilities.
Well, DAYTONASAS-TEC and IconD3o are more squishy, so they seem safer. (Both CELevel 1)
Of course, this is a sense of security that cannot be compared to the flimsy, non-standardized mesh protector.
◆ Weight
Quantity:Pair (for Left and Right) and weighs about 300g. In order of lightest to lightest, DAYTONACP2 (155g) 、IconD3o (206g) This. (300g) 、Komine (650g) 。
DAYTONA is light - half the weight. 300g is heavy! I don't feel it's heavy if it's about 300g, but it feels a little heavy when I open the fastener of Jacket.
ChestPocketQuantity:Pair (for Left and Right) It would be easier to understand if I say that it is like putting a smartphone in a
General Comment
Quantity in summer:Pair (for Left and Right) This NUCLEON FLEX PRO Ci is the best choice to put in the Mesh jacket with ProtectorPocket.
CELevel and price, breathability, thickness, softness, all good. The only drawback is that it is a little heavy....
It has a strong and unique scent like a perfume and is used as a substitute for air freshener in Jacket.
By the way, the following is a list of applications.
For cheap price = DAYTONACP-2
Emphasis on defense and coolness = KomineSK-831
I want to wear Slim with a good integrated shape = IconD3o
View detail
Chest Protector should be equipped
Since I use both KUSHITANI and Thailandichi's Wear, I think this Protector is cost-effective for both.
If running, Protector also allows air to pass through without steaming.
After getting off the Motorcycle, it feels somewhat obtrusive, but when riding it does not feel uncomfortable.
In addition, since it is a Button and Surface Fastener, installation is easy.
I think it is worth buying Chest Protector because it is low-priced and easy to equip. It is definitely safer to have it than not to have it.
View detail
Satisfied
It's a hassle to put Chest Protector on every time.
So, I was looking for a size that would fit in the chest pocket of my Jacket.
As expected, it is the same Manufacturer, so it is a Just fit!
I think it is less secure than the separate type, but I took the ease!
View detail
It's properly cured!
I am not sure about the Protector that comes with the company's Coach jacket as I see it, I don't care if the price goes up, just make this Standard Equipment." I bought it thinking that it was a good idea.
It feels like a very hard, low-resilience material, but when the temperature is high or warmed by body heat, it softens and becomes less sticky and uncomfortable. It is a strange protector that becomes stiff and pushes when it is subjected to impact. I am sure that this is the case, because my hand hurt when I hit it as hard as I could.
I will continue to use it, hoping that it will not be taken care of.
View detail
Flexible
[How is it used?
It is combined with KUSHITANIJacket.
Was the one you received as per Image?
This was my first time with Chest Protector and I thought it was lumpier than I expected.
If you are used to it, it may feel normal.
How was your experience with it?
The sense of security is not so great because there is a board that seems to be highly defensive where there was none before.
How did it compare to other products?
The fact that it has both a Snap button and Magic tape dramatically improves usability.
I think it can be used for most Motorcycle Jackets.
In addition to Universality, it is more cost-effective than other Manufacturers.
If you don't like Yamaha, I think this is fine.
View detail
It was as expected.
Easy to buy and made by YAMAHA.
I purchased this for my KUSHITANI Vector Jacket, but it can be easily attached to other jackets by sewing on the Surface Fastener.
View detail
Used for DEGNER's Jacket
I tried upgrading my DEGNER flight jacket with a Standard Equipment Protector. The size is almost the same and it fits in the ProtectorPocket without any difficulty. I'm glad I wore it!" We will strive to drive safely so that there are no View detail
good chest protector
I bought this DAYTONA SAS-TEC chest protector to equip it on the NANGA AURORA-TEX jacket I bought before. I thought that this chest protector would come with the jacket, but it turned out to be optional. This chest protector It is usually soft, but when it encounters an impact, it will harden instantly to protect my body. -------------------------------------------------- -------- Buying this Daytona Sas-TEC breast protection is to put it on the Nanga Aurora-TEX jacket that was purchased before. I thought it would be attached to the jacket before the jacket. As a result, it needs to be selected. It is usually soft, but when I encounter impact, I will instantly harde my body. Powered by Google Translator View detail
Y's Gear (Yamaha) Chest Protector
I purchased this Chest Protector to attach to my KUSHITANI Anifesto Jacket, but it was too expensive for me. I decided to choose Y's Gear's Chest Protector because of its brand name and safety.
If you use a type with Magic tape at the center of KUSHITANI, you can easily install it and leave it in place without any problem.
If you normally use a backpack or similar, there should be no problem storing it in your backpack after you get off the Motorcycle.
Since the zipper is tightened while driving, the white YAMAHAMark is completely hidden; even if you walk around town with the zipper open, the YAMAHAMark is barely visible, so you can wear it without worrying about it. At this price range, it is Reasonable in case of loss, easy to handle, and a good charm in case of emergency.
Quantity, although it does not come to the side.:Quantity as Chest Protector for 1pc.:1 pc. I think it would be good to have it.
View detail
Change Protector
I purchased this product to attach it to Komine's Inner protector SK-693 sSize. It is a little smaller than the existing Komine protector, but it can be installed. It looks a little cleaner. I would like to purchase one for my other Jacket. View detail
![NUCLEON KR-CELL CiR PROTECTOR [New ClioN KR-1 Cell CiR Protector]](https://img.webike-cdn.net/catalogue/images/73244/Large-6702020-003-fr_nucleon-kr-cell-cir-protector_TS.jpg)
Quantity:I highly recommend this product to anyone looking for a 1 pc. Chest Protector.
Impresario Specifi cations
Height 168cm, weight 65kg, I do my own weight training and am not a skinny person.
The chest circumference will be 93 cm.
Was the one you received as per Image?
It was not on Image in a good way.
1.Gap-proof Silicon Tape is attached. (Neither the product image nor the description mentions that it has Silicon Tape.)
2.Excellent breathability.
[How did you feel about the Fit?
LargeChange good Fit feeling.
Even when the arm is extended to the Handlebar, it does not interfere with the Chest Protector and provides extensive protection.
How was your experience with it?
The ventilation is excellent.
We can confidently recommend this product even in the summer.
Please check the pictures to see how well ventilated it is.
Also, as mentioned in the Fit feeling, Protector does not interfere with the physical body and does not interfere with lighting.
[Was there anything that disappointed you?
I have the impression that it is not rigid enough.
It is not as stiff as RSThailand, but feels like rubber with a certain degree of firmness and stiffness.
What are the specs of the product, such as protector?
I selected L Size.
I think L Size is Large sturdy unless the pattern is considerably Small, such as for women.
At least for those who are taller and larger than me, L size is fine.
If you are concerned, we recommend that you try them on at Motorcycle supply stores nationwide.
I tried on the Type with Button and bought it.
How did it compare to other products?
The ventilation is still excellent.
Compared to other products, it is possible that you may have forgotten to put it on. It is so well ventilated that you may have forgotten to put it on. (when wearing mesh jacket)
The deciding factor in the purchase
1.It should be breathable.
2.CELevel2 and thin thickness.
3.Be a reliable Brand.
4.Not that expensive.
5.The area must be large enough to cover the entire chest area.
【Included Parts:presence or absence】.
Instruction Manual only.
[Notes]
It does not come with a Button, so if you do not wear a Jacket on Tight, it will slip off and not protect you.
The Belt with Button from Komine can be easily adapted to domestic Jackets. (Please refer to the image)
[Opinions and requests to Manufacturer
As a request to Webike, I think it would be better to mention that Silicon Tape is attached as mentioned above and replace the image.
View detail
![NUCLEON FLEX PRO Ci] Protector](https://global.webike-cdn.net/photo/impression/2a/2abf92e737336ca15df231acc9f441f7L.jpg)
Lightweight for city driving.
I used it for elf's Jacket.
The size was set to S according to the Jacket size, but there was quite a bit of extra storage space, so I think it would be better to use M or larger if you are for Mens.
The top one is a mesh-like material made of hard urethane foam that often comes as a freebie, and the right one is a solid Protector.
The protection is not as good as the Protector, but it is CE Level 2, so I think it is good for light equipment for casual city driving. However, it is CE Level 2, so I think it is good for light equipment for casual city driving.
As you can see in the close-up image, the breathability is good, so it may be good even in midsummer if you match it with a mesh jacket or the like. As a matter of course, the breathability is obviously better than the stiff ones.
View detail
![[Honda X RS TAICHI] Tech Cell Chest Fitting Belt For Protector](https://global.webike-cdn.net/photo/impression/35/35efbbbba377c57e8e01088443ea9f94L.jpg)
I bought it because of how cool it looks.
I purchased the SeparateChest Protector from Thailand Chi to make it independent of Wear.
The CPS-compliant Protector can be attached directly to the Wear, but I was concerned about the Protector dangling when the front is open and the chest portion of the Wear pushing up toward the face when worn, so I decided to make it independent by attaching a Belt.
I didn't like the fact that the OEM product from Thailand has a large logo, so I bought the Honda collaboration one because of its appearance.
I am a firmly type of person and I wear XL for riding wear with a little room to spare, but I am able to wear this band with a little room to spare. Especially the adjustable back is very convenient.
By making the Chest Protector independent, it is possible to move around after getting off the Motorcycle without Stress.
It is very convenient.
View detail
Used for DEGNER Riders
Purchased to replace the Protector that came with DEGNER Riders.
The L size was just right for the M Riders.
View detail
Stack them up to increase defense!
Was the one you received as per Image?
At first glance, it looks like a slightly hard urethane sponge, which may seem a little uneasy to protect from the impact of an accident, but it is certified under the European standard EN1621-3Level 1. [Color] Since it is Clear, the performance is probably guaranteed to a certain extent.
[How did you feel about the Fit?
I usually wear Komine's JK-574 full year touring jacket Rama II, and although this jacket originally had a Chest Protector called SK-689 Inner chest guardSF as Standard Equipment, I have not used it. The SAS-TECChest Protector is a thin plastic and urethane foam protector, so I use it over the SAS-TECChest Protector. I don't end up using the special bag that comes with this product. 2 layers of Chest Protector gives me some pressure when I put on the jacket, but I don't mind it while riding.
How was your experience with it?
The Protector is somewhat stiff when cold, but becomes quite squishy and soft when warmed by body heat. It is good that the Protector fits to the body shape, but I am concerned about whether it can really protect the chest area. Impact "surface" I guess it's fine when you take it in the "point" I feel that it is quite bad when the product is subjected to a The fact that there are holes all over the Protector to ensure ventilation also makes the impact "point" The "M" in the name of the "M" is not supposed to be used in the case of the "M". For this reason, we thought it would make sense to use Komine's PlasticProtector on the front side and this SAS-TECProtector on the lower side (body side).
[Was there anything that disappointed you?
As long as we don't have accidents, we won't be disappointed, so we will strive to have no accidents!
How did it compare to other products?
However, since there was some concern about using it alone, we decided to use it in combination with Komine's Chest Protector by overlapping it on the underside (body side) of the Chest Protector.
View detail
SAS-TEC is soft and reduces the pressure on the chest
It is a store purchase but Impression.
[How is it used?
It is worn in a Jacket with a chest ProtectorPocket for summer winter.
How was your experience with it?
SAS-TEC is soft and can be worn without much discomfort because it adapts to the body, and it becomes a pigeon chest when seen from the outside because it becomes a little thicker than HardProtector, but it is whether to allow there.
View detail