Reviews
I was surprised at how breathable it was.
The breathability of the Mesh jacket is not compromised and it is very comfortable.
I think this is a good product from Balance, with good expectations there for shock absorption.
View detail
Cost-effective! Knee protector
I bought it about 15 years ago. No Fear." The Knee protector strap of the "K" has been stretched and the fixation has become lax, so we are replacing it.
This is an imprement after several uses.
【good point】
Shock-absorbing pads are available for above-the-knee quantities.:Pair (for Left and Right) CalfQuantity:Pair (for Left and Right) Fit is good.
I think it has a high degree of protection.
Lightweight and easy to put on and take off.
Good cost performance.
What's not so great about it
None.
View detail
OEM Product is required
We are using an Alpinestars Jacket with a Type that attaches the Protector with a Button.
At first, I tried to attach a Komine Protector, but it did not fit due to a difference in the standard of the button.
If you want to use Protector as an integral part of Jacket, you have no choice but to put this on.
The texture is high and has some breathability.
It is CE2 standard, which provides peace of mind.
View detail
Parenthesis OK
The material is soft like hard rubber and the fit is not bad.
L/XL is just right, Rubber has stretched somewhat.
If you walk, they will slip down. Especially with synthetic fiber pants.
The spec. of the upper thigh fixing is slightly different from the product image.
Kneeling will shave the Mark of AlpineStar.
I think Komine is more defensive.
But Parenthesis is fine.
View detail
It makes a difference in peace of mind!
I bought this jacket because my previous Alpinestars jackets made by Komine fit in it, but not zaca.
High safety standards [Color] I feel safe because I am Clear.
I'm glad it's SS and it's flexible.
As a side note, the Alpinestars Jacket was stressful because I had to manually insert and remove the protector, but the zacaSeries has a direct pocket, so I am now free from stress!
View detail
Sense of security No. 3
Used for Andes Dry starv3Pants by Alpinestars.
I feel secure by wearing Protector, but there is another reason why I purchased this product.
I was wondering if there was a good solution to this problem, and I thought that this product, which can be attached near the waistband, might improve the problem somewhat.
The Protector has become thicker, which is somewhat better, but…
I guess I'm still a little Oversized.
View detail
Exactly for OEM Product only.
The product is an OEM product and fits easily into Alpinestars jackets without any problems.
The material is light and soft, does not interfere with driving, and the mesh finish makes it comfortable to use during the hot summer months.
View detail
Exactly to OEMJacket
The product is an OEM Product and fits perfectly into Alpinestars' Jacket.
Material was light and soft and did not interfere with driving, but it is slightly thicker and bothersome when worn.
View detail
Other than the price, I'm happy!
New Clion Spine Protector has CELevel 2 and CELevel 1. CELevel 1 is also expensive, but it is not something that is rarely repurchased, and I bought CELevel 2 as an insurance policy in case of emergency.
No problems at all with installation.
The weight is heavy for a Single Body, but it is not an issue once the Jacket is attached and worn.
I have attached it to a leather jacket, so it is useless, but with such a mesh structure, it seems that breathability can be maintained even if it is attached to a summer jacket.
My only complaint is the high price….
View detail
Price is too high.
I had no choice but to purchase the 3SeasonJacketSP-S purchased at another store because it was not equipped with Spine Protector.
AlpineStar's Spine Protector comes in only two varieties, the cheaper of which was purchased.
It is expensive enough to be cheap.
The size of the Protector is EXACTLY the size of the Jacket you plan to wear.
The difference in price seems to be the difference in safety standards, but this is good enough for me.
I think it would be nice to have a low gradeMODEL that could be priced a little lower, although it is something that protects the spine of the Large.
View detail
Size details required
I had no idea about the size, so I relied on the information on the ManufacturerSite and bought a L size.
I received the product and put it through my legs and found it to be quite tight, and I thought I made a mistake, but I am convinced that it is better to be as tight as this when I think about gapping. Now I want to actually go out and see if there is any pain.
View detail
Sense of security Part 2
I purchased this for my favorite T-JAWSv3 with 3SeasonJacket.
Jacket is Euro size M.
The Protector of this product is L.
The Size was Exactly as confirmed by Okada Shoji's Site.
It is softer than I expected and Bigli.
However, in the compression direction, it is ka-chica-chi, which is a bit strange.
It will protect you well.
Since T-JAWSv3Jacket has Dry starFilm, which is waterproof and moisture permeable, I could not visually see the pocket for the protector, so I had to attach it only by feeling with my hands, which was quite a challenge.
Together with the Back Protector we purchased last time, we are now fully equipped and feel more secure, but the best thing is that these pieces of equipment are not active.
It has become a reliable insurance policy.
View detail
OEM make
[How is it used?
I installed it as an insurance policy for myself.
Was the one you received as per Image?
Shorter than Image
How was your experience with it?
I feel more secure.
[Points to note]
None
How did it compare to other products?
This is definitely better than the Sponge product from PeLePera.
Other items that would be helpful
I want it to be a little cheaper.
View detail
Satisfied
I haven't received it yet, so I can't say for sure, but it looks good. View detail
Lightweight, Breathable
I chose this product because I was looking for a CE Standard product with Mesh construction.
I bought it for hit-air's YM-for CV, so I chose S Size, Just size, length 39 width 22.
Because the width is narrow, the range of protection is limited, but I think that this one is more universal because the shape of Pocket often becomes unsuitable if it is a large threshold thing of the overhang.
The TPU-like Material is reasonably flexible, so it's easy to put in Pocket.
The SIDE part has been cut out of the shell to make it more flexible, which will reduce the feeling of tappiness even on motorcycles with a forward lean.
The beehive shaped shell is lined with Mesh fabric for excellent breathability.
It is quite light, 240g compared to 390g of YM-CV, and I don't have the feeling that something is hanging on my back anymore.
View detail
ManufacturerOEM peace of mind
BURIRAM JACKET https://www.webike.net/sd/24152666/The L is mounted on a 2XL of
ManufacturerOEM Product, Size is JUST.
Material is flexible and (That's why CELevel 1?) The fit to the back is also good.
The mesh construction means it doesn't get stuffy and if it was a CELevel2 I wouldn't have complained.
View detail
Reliable (?) JMCA recommended Chest Protector
Mesh jacket for commuting (Made by Alpinestars) It was used to enhance the protective power of
I've been using Mesh jacket for my commute for a long time, but recently I bought it because I suddenly started noticing that I wasn't using Protector at all.
I tried to install the L Size to the M Size jacket, but the size was quite limited.
It is recommended by JMCA, so you can feel secure about protection performance.
The Protector is designed to fit inside the jacket, so it won't flap around when you take it off or put it on.
(The Protector made by TAICHI that I use separately is a type that fastens with a Button, so it flaps around. https://imp.webike.net/article/321102/)
Compared to the Urethane that is installed from the beginning, there is a weight, but once you put it on, it is Level that does not bother you.
The downside is that it has a mysterious smell, probably due to the material used in the product... ・ I'm sure it will wear off with use, but it might bother you when you first start using it.
View detail
I've got my favorite Manufacturer.
It can't be fixed Firmly because it is attached with two Belts, but if it is used together with Boots, I don't think it will gap like Large.
Even if there is a joint, it is a loose fixation, so how effective is it against knee twisting? But it is.
I think Protection is necessary and sufficient if it is light use, such as forest road touring, etc. My foot was caught between the body and the ground, but my foot was unharmed together with Boots.
Stepping stones and stepped-up tree attacks are also effective because of the large area covered.
View detail
Protector is a must.
Cannot be used with Single Item.
This product must be used in conjunction with Spine Protector.
The Fastener on the front makes it easy to remove and install, but the center is unprotected.
As I wrote in the Spine Protector, the joint is too loose, so it's not good that it sometimes comes off.
View detail
Protector is a must.
The thin protector made of urethane sponge that is standard equipment for riding jackets cannot protect the spine in case of an accident, so it is a must have item when riding a motorcycle from touring to circuit running. It is a must have item when riding a motorcycle from touring to circuit riding.
It is best to use this product with Chest Protector (sold separately).
The disadvantage is that the joint with the Chest Protector is fuzzy, so it sometimes comes off.
View detail