Reviews
Also available at NeoRetroMotorcycle
Was the one you received as per Image?
Almost as per Image
[How did you feel about the Fit?
Tight, and I hope it will fit in like Leather.
How was your experience with it?
There is no action pleated, but there is a stretchy fabric behind the shoulders so there is no tightness even when leaning forward.
Waxed cotton is windproof, but not insulating. It is a retro single jacket design, so it will look great in the city or on the road. I think it goes well with not only SCRAMBLER and TRACKER but also NeoRetroMotorcycle on the road.
[Was there anything that disappointed you?
There is a little extra room around the neck, so on cold days, cold air can get into the neck.
What are the specs of the product, such as protector?
ProtectorStandard Equipment for shoulders, elbows, and back. shoulders and elbows are fairly solid protectors, but no CELevel is listed. Chest Protector is sold separately. There is a surface fastener for Chest Protector of the same brand.
How did it compare to other products?
Compare to:DEGNER18SJ-6 GoatLeather jacket
The main fabric is waxed cotton, so it does not have the stiffness of leather.
The deciding factor in the purchase
Because it was cheap at Sale.
View detail
Cospar good
Protector and fabric feel very good, and I think the price is reasonable. However, I would have preferred the size to be one size larger than usual.
173cm 70kg L size ordered
View detail
Rough construction details, but Ideas and Design are worth buying.
Finally, this time we have the right Size. I am 172cm tall, weigh 68kg, have a chest circumference of 105cm, Waist 78cm, and a long limbed European pedigree with a muscular and crispy body shape.
I usually use Eu50 EuropeanSize in Just fit. I have a lot of Levuit and Dainese etc.
The ArrowLeather jacket by rsThailand Chi is also Tight fit in Eu50.
This one is XL and just fit.
The construction is poorly sewn, and the strength is not comparable to that of Rev-it, etc., and is not even close.
The sleeves and the length of the garment are quite long, and what kind of body shape are they intended for?
In addition, the thickness of the cuffs is abnormally wide, and the cuff drawer is structurally misshapen, so if the sleeves are drawn down, they overlap with the cuff zipper, making it very difficult to draw them up.
However, I personally think it is lightweight and can be equipped with hard protectors on the back, shoulders, elbows, and chest, and if you put on a MicroDown jacket or a waterproof Nylon Inner Jacket in the inner, it can be used in various situations, and it is a very good looking jacket with sporty and off-road design. It is a very good looking jacket with sporty and off-road design.
Large air intakes on the chest and back and air ventilation throughout the sleeves allow for comfortable riding in mid-summer.
I don't expect it to be durable, but with the sewing skills I have developed at LeatherCraft, I plan to repair it as many times as I can and use it for many years to come.
We purchased ours on DFG's inventory clearance sale, so we think the price is fair, but I think 60% of the list price is a fair price at best.
It is the perfect partner for those of us who are attracted to unique design and function.
View detail
Size setting and fabric are not good
I bought this item because I had accumulated some Shopping Points. I chose the L size because I am 172 cm tall, weigh 68 kg, have a 105 cm chest, 46 cm shoulder width, 78 cm waist, and have long arms and legs with muscles that are tight.
The Jacket I received was snug in the shoulders and chest, very narrow around the pelvic area, and the sleeve length was just right, but the Protector was placed abnormally high up, and the elbow cup shape was about 5 cm above the elbow. The fabric is thin and I'm not sure if it will last for a year if you are going on a full-scale adventure touring.
The best thing about it, however, is its design, and although it is not mesh, it has plenty of air ventilation, and it is made to be worn all year round. It is also equipped with YKK zippers that can be used to join pants on the back.
Waist at the bottom of Jacket after all. (of the pelvic area) The circumference was too tight, so I bought an XL size and sold the L size which was too small for me.
The sleeve length is L Size, but other parts are cut from a paper pattern that looks and feels like M Size.
My impression is that the pattern reflects a rather skinny body shape.
I usually wear eu50, and I love Thailand's Dry masterExplorerJacket, but this one is size L and Tight fit. (Inner is Tight fit with it removed.) We are compromising on the (In XL, the girth and length are abnormally large, and the sleeves, shoulders, and chest are a little roomy, but there is too much room around the girth to the point of being uncool).
I will write a detailed impression again when the DFGNAVIGATORCoolJacket in Size:XL arrives.
View detail
Speaking of RALLY50, this is it.
This is the best RALLY50Jacket for TENERE700 etc. BigAdventure.
Design has completely hit the nail on the head.
It's a waterproof inner jacket, so it's not suitable to be used as a rain jacket like Thailand's Dry Master Jacket, but the ventilation is well calculated and we plan to wear this jacket in summer. The Protector on the back of the Equipment is just a Sponge, and the Shoulder protector is not very tight, but you can use other companies' Hard protector, so you can customize it according to your needs.
With Setup pants and Coordinates, you can be a complete Paris-DakarRider.
Revit's OFFTRACKetc. is also great, but Design is outstanding and DFG wins.
View detail
I chose it for the present
This is a Present for Motorcycle's Large seniors
This is the jacket that was selected by my motorcycle friends
The motorcycle I'm riding is a TriumphTIGER 900, and it's very affordable, even though it's too old to be back He is a person who goes touring all over the country in good spirits
This AdventureType jacket is perfect for those people
When I held the Jacket in my hand, it was very heavy
The fabric and stitching is solid
I am 5'7" tall (medium build) and I ended up going with the L size and it fit perfectly
However, the stiffness of the fabric may have made it a little tight to put on/off
View detail
Cheap or bad
I mainly use it for commuting and touring
After less than 3 months of use, the magic tape on the sleeve lost its bonding power
The wind at about 30k miles per mile makes it flutter and flutter Pe LePera and bother me
I bought it because I wanted all-weather equipment for my commute
It was inexpensive for an AdventureSuit, so I got a jacket and pants to try it out Quantity:I bought it as a set, but I would say it was cheap or not
First of all, the stitching is unraveling badly in each part I'm trying to cut off the frayed parts with Scissors, but it's not a good idea to pull it too hard It comes out so much that there is no Drill with use The whole thing is unraveling Finally, I thought it might be a ghillie suit
The fabric, material, winter protection and waterproof performance of the jacket itself are good However, the sewing technique is not good
The product is good, but the quality of the sewing and Magic tape is poor
The bottom line is that you are using less durable Parts
Is it because of the conflicting desire to maintain both Cost and Quality?
I'm not sure when it's AdventureSuit and it has durability issues
If the price is high enough to match the quality of the product, it's acceptable, but the quality is not as good as the subtle price If it's not good, I personally feel like I'm missing out... on 1Season only Items is expensive, and at this price, I'd like to see it last 3 years I should have honestly bought something in the double digits
Dear DFG, quality control and re-selection of Material and processors is required Without corrective action, it will be difficult to improve quality and customer satisfaction
View detail