• Home
  • Product reviews
  • Search reviews
  • Helmets
  • Other Helmet Options / Repair Parts
steps-review.png
Filter
icon-webike.png
Write a review and get Webike Points!

Reviews
Other Helmet Options / Repair Parts Clear all
PP-1 (LS2) Pinlock Pin
LS2
PP-1 (LS2) Pinlock Pin

Fits: Others

Japanese Webike user
4/5

They even sell parts like this.

The store where I bought the helmet does not even sell such small parts. View detail

Easy Strap
ROUGH & ROAD
Easy Strap
Japanese Webike user
4/5

Good to have it installed.

When I was touring in the woods, I was wearing glasses, and I was having trouble putting on and taking off my goggles. I was looking for something and found this Easy Strap. Now I wish I had installed it sooner. View detail

Screw
LEAD
Screw

Fits: Others X-AIR RAZZO-V, Others X-AIR RAZZO STRADA

Japanese Webike user
4/5

Daily use.

I bought it because it broke when I loosened the Bolt in Shield Maintenance. View detail

Helmet One Touch Clip
KIJIMA
Helmet One Touch Clip

Fits: Others

Japanese Webike user
4/5

I have been using it for many years on my Helmet for street riding.

I use it on my ARAI full face helmet for street riding, and it is convenient for me because I can attach and detach the helmet's chinstring with one-touch, but I have to remove the Snap button on the chinstrap belt, However, the Snap button on the chinstrap belt has to be removed, so it is a bit tricky to install. The Gold Parts are made of steel, so rusting is a bit of a problem.:I would be happy with Large change if they commercialize it in Stainless Steel (even if the price is higher, I would still buy it...). I would be happy to buy it if it was made in Stainless Steel. View detail

[Qualifier DLX Optional Parts] Chin Curtain For Qualifier DLX Helmet
BELL
[Qualifier DLX Optional Parts] Chin Curtain For Qualifier DLX Helmet
Japanese Webike user
4/5

Can be attached to QUALIFIER

I had to wait for a while to get it because it takes a while to arrive in stock.
Looking at the chin part of the QUALIFIER, there is a Button receiving side, and I thought it was obviously for the Chin curtain. Therefore, I imagined that if there was no QUALIFIER-specific product, a DLX repair product, which is equipped from the beginning, would be attached.
I was a little worried because the product description said it was for DLX and not compatible with QUALIFIER, but I was glad to see that it could be installed properly as expected. View detail

Easy Strap
ROUGH & ROAD
Easy Strap
Japanese Webike user
4/5

Could be used on forest roads in the summer.

I have not used them on a motocross course or in any other high speed environment, so I don't know how durable they are. I have not used them on a motocross course or other high speed courses, so I don't know how durable they are, but they are sufficient for playing on forest roads, and the price is not too expensive, so I could easily buy them. View detail

Ventilation Liner for Helmet [Skull and Bones]
airhead
Ventilation Liner for Helmet [Skull and Bones]
Japanese Webike user
4/5

I think that it is quite good.

This is the second time I have purchased this product.
The last one I bought was also used for 5 years, but I had no problem with it, and I changed my mind with a new Helmet.

I think the durability of the product is fine, and the stinging at the beginning of wearing is a good thing if you think of it as a blood circulation booster (laugh). View detail

Helmet One Touch Clip
KIJIMA
Helmet One Touch Clip

Fits: Others

Japanese Webike user
4/5

One-touch with this

I replaced the chinstrap on my helmet with a one-touch. The other day I went on a long touring trip and noticed that I was not wearing a chinstrap and managed to tie it through the ring with my left hand, but I was reminded that it was dangerous to use a large clip while riding and I remembered that KIJIMA has a one-touch clip and ordered one. I thought about it, and this was the third time I had ordered one. When I looked at the delivered product, I saw that it was exactly the same as before. The installation is easy for anyone. As for the quality, I think it would be easier to install if the claw that locks the clip by pushing it in was longer and could be adjusted in about three steps. View detail

Ventilation Liner for Helmet [Frames]
airhead
Ventilation Liner for Helmet [Frames]
Japanese Webike user
4/5

Inner Cap and Quantity:Set!

Used on SHOEI JO L Size. As others have said, the warts sting my shaved head and it hurts! But it makes it cooler.
In Touring, Inner Cap and Quantity:When used in the Set, it is cool, absorbs sweat, and does not hurt over long distances.
It is easy to install and remove, so I remove the Inner Cap for CHOINORI on my commute to work or in the neighborhood because it is a hassle to put it on. View detail

Easy Strap
ROUGH & ROAD
Easy Strap
Japanese Webike user
jp
4/5

Recommended for street riding OffHelp GlassesRider

[How is it used?
I bought it because I am a GlassesRider and I have to take my helmet on and off a lot for short distances.

Was the one you received as per Image?
No problem at all

How was your experience with it?
Quite useful for GlassesOff Hell Rider.
For those who have not put on Glasses.
Recommended if you do not like the Belt of the Goggles covering the Design of the HelmetRear.

[Points to note]
Some manufacturers of Goggles use an integrated type of Goggles with no interchangeable Belt.
I have a lot of problems with Belt widths, etc.
You can be sure to do an actual Goggles match after purchasing this item.
I was a little concerned that the explanation on the back of the package was in English version and the illustration was difficult to understand. View detail

Helmet Ventilation Liner [Skull And Bones].
airhead
Helmet Ventilation Liner [Skull And Bones].
Japanese Webike user
jp
4/5

Hair is not flattened.

I don't see any improvement in air permeability, but my hair is not flattened. View detail

Ventilation Liner For Helmet [Airhead Meisai / Meisai Camouflage].
airhead
Ventilation Liner For Helmet [Airhead Meisai / Meisai Camouflage].
Japanese Webike user
jp
4/5

Anti-hair crush!

I use it to prevent my hair from getting squashed!
Some people may find it painful, but once you get used to it, it is surprisingly large and durable.
But it's hard to say because it varies from person to person. View detail

Sucker For Opening/Closing Shield
ALFA RAYS
Sucker For Opening/Closing Shield
Japanese Webike user
jp
4/5

There's a lot of work that goes into it.

At first, it looks like just a Suction Cup and the color is Quantity!:It's like being Set.
The color is solid and the Suction Cup is a little thicker and more durable.
At first, I installed the normal opening and closing Shield as it is, and tried opening and closing work, after all, the solid feeling of the initial use is in the Shield, and the shift of the fixed part is easy to occur, and it seems that opening and closing with holding down the fixed part is certain.
Afterwards this Suction CupQuantity:With the Set installed, it feels much more secure, and I can now open and close it securely with one hand, limiting any shifting or movement of the wearing part when opening and closing.
I used it at high speed, but there is no wobble, and it is fixed Firmly, and I think it is the right answer to install it because I can use it without a problem after installation.
I was able to use it quite comfortably with a sense of security at high speed.
In addition, I think that it is Point to fix it in the position that can hold Suction Cup firmly when mounting it. View detail

Ventilation Liner For Helmet [Electric].
airhead
Ventilation Liner For Helmet [Electric].
Japanese Webike user
jp
4/5

It works, but you're still getting used to it.

It's the height of summer and the Helmet is stuffy.
I washed the interior of Helmet. Introduced with it.
The reason for this is because the interior of the helmet is a little worn out. As I tend to sweat on my head more than other people, it's a great way to get a breeze through. You can actually feel the breeze when you wear it. But it's also sweaty and hot, so my hair does get steamy and crushed by sweat. But I feel like it's a bit better than the sticky front of my head, though. I'm grateful for that alone when I use the Motorcycle to commute to work.
I didn't have any painful warts that left marks on my head, as other Impressions have said. In that respect, I think it suited my head and the shape of the Helmet. The Z7 is not a bad fit for the Helmet. I felt the chin strap was a little tight due to the small size. I'm thinking of using it to protect my hair during the winter months. View detail

[DIN MARKET] One-touch Face Guard
Motobluez
[DIN MARKET] One-touch Face Guard

Fits: その他

Japanese Webike user
jp
4/5

Very nice product, but the smell is a bit...

It was a very good product
It looks well made and sturdy, a good product.
But the smell was very harsh.
If you're thinking of buying one, I recommend filling a sink or tub etc. with hot water and leaving it on for a while.
Just dip it in the hot water and it will take away the smell and the bitterness of the Brown Brown. View detail

Ventilation Liner For Helmets [Britannia].
airhead
Ventilation Liner For Helmets [Britannia].
Japanese Webike user
jp
4/5

I think it works.

Depending on the season, I feel that there is a Merit to use, and it's on all Helmets I do.

It may be less effective during the summer sweating season.

If you wear a helmet for a long time, you may find that the protruding part of the helmet leaves a little bit of a mark and you may feel a little bit sick. It will look bad. I don't blame you, though, because that's also to keep your hair from getting habitual. View detail

Shield Converter
BUCO
Shield Converter
Japanese Webike user
jp
4/5

It has a good quality and luxurious feel

We have previously seen BUCO's "Bolt-On Bubble Shield WITH Converter I used to use the
https://www.webike.net/sd/20356277/

One cold winter morning, after years of use, I raised the Shield and the Arm part broke off. I did. I've used it enough to give up with age, so I don't think this is a particular problem for me.
There is not so much damage to the Shield, so this time "Shield Converter purchased

I've always been concerned about the wind rolling in a bit from the top of the Arm, but at street speed, not so much. If you don't care about it and have a high speed range of use, you can use the sturdy transparent Vinyl Tape to cure it. will be gone.
It's much easier to use than that, and it's much easier to shieldUP at a signal.

The product arrived and was replaced as soon as possible.
Shield off... This is where I realized Hata.
"Shield Converter is Snap Button Type.
"Bolt-On Bubble Shield WITH Converter is Bolt On style.

Hmmm, can't we divert the Bolt... Snap button...
So, I snapped the Bubble shield of Snap button as soon as possible! . And while we're at it, we had a change of scenery in stock. [Color] I made it to Smoke.

As for the installation, the Shield and Converter buttons are very stiff, so you can't install them. I feel like I'm doing my best. I think it's probably for wind resistance, so that's the only thing I have to work on. The rest is perfectly fine.

These are the Impressions, but it's important to note that the part that stops the Shield is "Bolt On style. When "Snap Button Type. There are a number of things to keep in mind if you're buying. View detail

Ventilation Liner For Helmet [Electric].
airhead
Ventilation Liner For Helmet [Electric].
Japanese Webike user
jp
4/5

Protruding marks are clearly visible.

This is a postscript to my previous Impression. Today I went on a short touring trip, wearing a helmet, running for about an hour and taking a break. When I went to Toilet and looked in the mirror, I found a VentilationLiner in the upper forehead area around the hairline I had arrived Clearly with the remains of the protrusion of the It's quite embarrassing, even more so since my forehead is slowly receding.
I can feel the comfortable cooling effect today, so I will use Inner I'm going to use Cap. View detail

Ventilation Liner For Helmet [Electric].
airhead
Ventilation Liner For Helmet [Electric].
Japanese Webike user
jp
4/5

It doesn't hurt ….

WINS X-ROAD COMBAT.
I've been considering buying one for some time because my head gets steamy in the summer. Wart hurts. I had put off buying it because of the opinion that it was too expensive, but since the cashless return is over, I bought it. I did.

Some colors are a little more expensive than others.

There is no special Instruction Manual in the Package. "Airhead" The only thing he explained was that the place where it says, "It's the back side.

For now, I put it on the Helmet and put it on.
At first the grains seemed to bother me, but after a while they didn't bother me.
I used it for a while on my commute to work, and I have a wide forehead. (Lol) So I had a trail of grains on my forehead.
I did indeed feel a breeze in my head when I ran with the Shield up, so it seems to have a cooling effect. Of course, closing the Shield will do that ….

When I moved the whole thing back, it receded to the level of my hairline, so I didn't have to worry about the grain marks!
There is less wind passing through, but the sticky head feeling is gone.
I ran for another hour or so and didn't experience any pain or anything else.
If you don't mind the steam in the Helmet, you may try it. View detail

Ventilation Liner For Helmet [Electric].
airhead
Ventilation Liner For Helmet [Electric].
Japanese Webike user
jp
4/5

Cost performance is not great

I installed it in i90 of HJC and tested it There is no dramatic change as an effect, but you can feel the cooling effect certainly I think the cost performance is low in terms of the effect you can get for $3,500
For me, it's good because the small protrusions give my scalp the right amount of stimulation, but I think this is a matter of taste View detail