Reviews
Fits: Others Compatible with CPB-1VShield, Others Glamster
I highly recommend it because it is not too dark!
"Green Light" I purchased Mirror!
There are other options for color variations, so you can choose the one you like best. The installation was easy:just remove the Shield from the Helmet and fix it to the Pin lock, so anyone can do it, and there is no need to buy an additional Shield. Moreover, the price is low compared to the cost of buying an additional ShieldBody.
I was surprised at the anti-fogging effect when I actually used it.The color of the Green mirror is SMART, you can just barely see your face inside the Helmet, but from the inside it has a Gray tint. It is like wearing thin Sunglasses.
It allows you to concentrate on driving during the day and also blocks reflected light. However, it sometimes felt a little dark when driving in Tunnel or at night, but it was not a hindrance.
View detail
Fits: Others Compatible with CF-1WShield, Others KAMUI III, Others SHUMA
It's insanely good.
It's great, I think changing the Shield makes it too dark, but this makes it so much easier to see both day and night. I think I made a good purchase. View detail
Fits: Others Compatible with VAS-V MVShield, Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Recommendation
The NORMALClear shield can be made Mirror, so it is the best cosmetic solution, and it is about half the price of a Pin Lock Seat on a Mirror shield. Also, VAS-V shields are especially good because you can make the entire shield Mirror when the shield is closed. View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
I am satisfied with the low price.
Used for Z-7.
The dimming is unpopular with other reviewers, but we purchased the [Color] The product is Clear, so there were no problems whatsoever, and the feel was comparable to the OEM.
The price is also lower than SHOEI's, so this is the recommendation for those who change frequently.
I'm going to Repeat it again.
View detail
Effective
Anti-fog effect is perfect.
I used it inside a Clear base Mirror shield and it was perfect for nighttime visibility. It also looks great as a brown.
It takes a hang to install it, so I was forced to install it and the edge chipped off...
Next time. [Color] I would also purchase Smoke and Polarized
View detail
Mitsuba sankowa Anti-fog film for ULOOK VAS-Z
Item received.as in picture,packing was excellent.shipment arrived on time.my 5th purchase so far.no issue.product as advertised.install and vision a bit blur,not sure if it's supposed to be that way or the product is not well store or old stock.can refer to the picture,the bottom is the pinlock install and the upper is the visor. View detail
Fits: Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Anti fog screen for Arai Rapide Neo
About quality and texture Smooth plastic well made, flexible but very durable. About the feeling of use During rainy days it will definitely not fog up. It works very well and serves it's purpose. I got the tinned color and it helps to block out the UV ray and the sunshine too. But once riding in the tunnel, there maybe a "double vision" on lighted vehicles. But will get used to it after familiar with it. About Design. Well made easy to install without any trouble. Cost performance and comparison with other products Not sure about other products as this is only my first time using a antifog visor. But I'm very satisfied with the price and the product. About shipping and packaging Small and light product. Well package with very professional packaging. Any concerns, cautions, or advice when purchasing Able to remove and wash it with any problem too. So able to purchase and use the product with ease. View detail
Fits: Others RAPIDE-NEO, Others ASTRO-GX, Others ASTRAL-X, Others RX-7X, Others VECTOR-X, Others XD
Circuit use!!
[How is it used?
I bought this product because my RX-7X I am using for Circuit use is fogging up and I wanted to put a pin lock on it.
Was the one you received as per Image?
I used it at the Fuji Speed wayShortCourse in early December and it did not fog up at all.
How was your experience with it?
I am wondering if I should buy more because the gold amount is reasonable and there is a wide variety of colors, etc.
[Points to note]
How did it compare to other products?
I have only used this one, but it was easy to put on and take off.
View detail
Helmet is cheap, but...
[How is it used?
Purchased to install on YX-6 ZENITH Shield purchased to use for mountain play. lack of Sense and no improvement in driving skills. The Eternal Beginner. I am a "I" who breathes hard when I attack a difficult area, and my shield fogged up and my visibility was zero when I used an adventure helmet.
However, if you use GogglesSpec., you will have to take off and put on the helmet frequently in a sweaty condition, and it is very troublesome to take off and put on the Goggles.
In order to meet my selfish needs, Pin Lock Seat was introduced.
How did you like it?
It doesn't fog up at all." It is not that the visibility is completely different with and without this product, especially in winter. I can't do without it." It is a product that I can't let go of as much as I would like to.
At a time when this type of product was not on the market. Anti-fog Spray. Ya The "stone? water (which was said to have an anti-fogging effect)." etc., on the motorcycle while frequently applying them to the Shield.
How did it compare to other products?
In case you're interested, it's exclusive to ZENITH's YX-6. (This is a sister product to HJC's HJH133 DS-X1, so it can also be used here.) So, when it comes to other products. UniversalPin Lock Seat This is the case
The anti-fogging effect will be the same, but the dedicated product is easier to position since it is attached along the Shield's claw, and the price is almost the same.
[Points to note]
When installing, slightly distort the Seat to the opposite side to align it with the Shield's claw, but do not use too much force as this may result in a crease, or if you work with dirty hands, you may install the Pin Lock Seat with dirt on the inside. So, please work without hesitation wearing rubber gloves or using beautiful hands.
The claw on the Shield side is surprisingly fragile and can easily break if you try to install it by force... (I have experienced this with other helmets... I cry) Work gently and carefully.
Read the Instruction Manual carefully and be careful not to use Chemicaletc. that should not be attached to the Pin Lock Seat.
【Included Parts:presence or absence】.
Pin Lock SeatBody and Instruction Manual are included.
[ITEMS TO BUY TOGETHER
None in particular, but once installed I wanted to replace it with a Mirror Shield or Smoke Shield (along with a Pin Lock Seat)." If this is the case, it will be a double hassle, so it is better to purchase and install the Shield together with the Shield you want to use during normal operation to save time.
Opinions and requests to Manufacturer.
For Helmet of the same Manufacturer Universalization to some extent." The helmet itself is more reasonable than those made by ARAI and SHOEI, but the Pin Lock Seat is about the same price, which seems somewhat overpriced.
[Points to note]
When installing, slightly distort the Seat to the opposite side to align it with the Shield's claw, but do not use too much force as this may result in a crease, or if you work with dirty hands, you may install the Pin Lock Seat with dirt on the inside. So, please work without hesitation wearing rubber gloves or using beautiful hands.
The claw on the Shield side is surprisingly fragile and can easily break if you try to install it by force... (I have experienced this with other helmets... I cry) Work gently and carefully.
Read the Instruction Manual carefully and be careful not to use Chemicaletc. that should not be attached to the Pin Lock Seat.
【Included Parts:presence or absence】.
Pin Lock SeatBody and Instruction Manual are included.
[ITEMS TO BUY TOGETHER
None in particular, but once installed I wanted to replace it with a Mirror Shield or Smoke Shield (along with a Pin Lock Seat)." If this is the case, it will be a double hassle, so it is better to purchase and install the Shield together with the Shield you want to use during normal operation to save time.
Opinions and requests to Manufacturer.
For Helmet of the same Manufacturer Universalization to some extent." The helmet itself is more reasonable than those made by ARAI and SHOEI, but the Pin Lock Seat is about the same price, which seems somewhat overpriced.
View detail
This is the best
Used for AraiTour cross
ManufacturerOEM Parts interfere when opening and closing, even though they are exclusive parts.
This product is totally stress-free. And it's easy to reupholster.
Although often neglected because of WINS, FOGWIN is above other manufacturers.
I think it is PARTS.
There is a slight chemical smell, but it disappears after a week or so.
I chose Standard because it is AdventureStyle's Shield.
If you can put up one for Adventure, I'd like to try that one too.
Quantity:Pair (for Left and Right) If that bothers you, you can see the edge of the Seat on the underside of the
It wouldn't have been suitable for driving on public roads in the first place.
View detail
Fits: その他 GT-air II, その他 Z-8, その他 NEOTEC II, その他 J-FORCE IV, その他 J-Cruise II, その他 VZ-RAM, その他 CT-Z, その他 SZ-G, その他 F-17, その他 AERO BLADE V, その他 KAMUl-III, その他 SHUMA, その他 RYUKI, その他 EXCEED, その他 AVAND II, その他 A-FORCE RS, その他 G-FORCE SS, その他 FF-COMFORT, その他 A-FORCE RS JET, その他 G-FORCE SS JET
Once you use it, you can't stop.
When I purchased the Helmet from WINS, the one I got as a bonus was ruined, so I peeled it off.
It was so badly fogged up that I realized how much this product had helped me.
The transparency is high and there is no change at all in visibility even when the lens is worn.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
Mounted on Z-7. Perfect.
Mounted on Z-7.
Fitting was perfect and It is easy to install.
I think the price is Reasonable and the Large change is good.
View detail
Anti-fogging effect
Installation is not difficult and easy.
The anti-fogging effect is quite good and does not cause any visibility problems.
I think it is very good because there is no
View detail
Fits: Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Anti-fogging
We are using Arai rx7x and purchased this product because OEM Product is out of stock.
After use, the Left Side Logo is somewhat obstructing the view, but I think it can be used without problems.
The product is also very effective in terms of feel, so we plan to repeat it, including cosmetics.
View detail
Zenith Pin Lock Seat
I had been thinking about buying a Pin Lock Seat for a long time, but had forgotten about it because of the price, but when I was thinking about what to buy at the Point of webike, I remembered and finally bought it. It was easy to install and it did not fog up and I was satisfied with the large size. View detail
Fits: その他 GT-air II, その他 Z-8, その他 NEOTEC II, その他 J-FORCE IV, その他 J-Cruise II, その他 VZ-RAM, その他 CT-Z, その他 SZ-G, その他 F-17, その他 AERO BLADE V, その他 KAMUl-III, その他 SHUMA, その他 RYUKI, その他 EXCEED, その他 AVAND II, その他 A-FORCE RS, その他 G-FORCE SS, その他 FF-COMFORT, その他 A-FORCE RS JET, その他 G-FORCE SS JET
dull
I've tried all kinds of anti-fogging Spray, applying it before riding, during the ride, etc., but in the end it still fogged up.
I bought this product this time and I am very surprised that it doesn't fog up.
I've had this fog Win for so long that I don't think I would have ever needed to buy an anti-fog sprayetc.
When installing, clean and dry the Shield and carefully install it so that no Dust or Garbage can get in between. Surprisingly, it was easy to install.
I've used it every day for a while, morning to night, without the anti-fogging Spray.
Areas with fog WIN do not fog up at all.
I'm going to keep using it and see how durable it is.
View detail
Buy Repeat.
Previously, the Ally Light Smoke + Pro Grip Clear I had installed it with Lapide SR's Standard Equipment's Clear Shield with Progrip Bronze Mira combination. As for my impression. Ally Light Smoke + compared to the Progrip Clear I feel that visible light is reduced well because of the mirror shield. Even when looking directly into the sunlight, this combination is less glaring than the previous one. I think it is a good combination. I bought this shield to use the one I have left over this time, but I also considered using the mirror shield of Other Brand Product. I also considered mirror shield of Other Brand Product. However, the shield itself is easy to peel off, so I decided to use the outside of the shield as shown in this article. Mirror processing on the inside of the shield I think this combination of shields is more durable. The price of the Other Brand Product processed shield is about 8,000 yen, and the OEM Shield + Progrip Mirror Shield Pro Grip Mirror Shield I think this combination is more economical. View detail
Fits: Others YF-9 ZENITH SportsStripe, Others YF-9 ZENITH Pinstripe
easy to read
The Visor should be spread out until it is completely flat. View detail
It's rather solid. Slightly transparent when bright?
Screen can be changed in less than 5 minutes. It's a little transparent when it's bright, but I'm generally satisfied. View detail
Pin lock.
I use AGV K5 S.
Shield was just getting WoundWound.
Due to unavoidable circumstances (laughs)
I scratched the shield on Asphalt surface and replaced the shield.
I didn't get the pin lock because I didn't know when it would be delivered, so I installed the one I've been using for a while, but hmmm, the pin is in the wrong position and I can't reach it (lol)
So I decided to go for the fog-in, which was recommended by Seiho.
There's an adhesive side to stick it to.
With pin lock, it gets more and more subtle (laughs).
I feel like this is better. Mm-hmm. (laughs)
I just put it on and will try it again and report back on how it works.
View detail