Reviews
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
uncomfortable feeling
Anti-fog Film for ULOOK VAS-V Item No. ： UL-01T01
Color; Dimmable For ASTRO-GX
OEM Pin Lock Seat (MVPin lock120) is not a problem. I was told that dimming is determined by the amount of UV light, but it is winter so I could not check.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
I don't feel the effect of polarization.
I wanted the polarization feature and also to make Clear shield a little darker because the Inner Visor of GT-AIRII is not dark enough.
It is said to be polarized, but I do not feel the effect.
The fake polarized Sunglasses sold on Amazon for about 2,000 yen are more effective in polarization.
Sunglassesetc. polarized light is used to reduce the reflection of light from the front glass of passing cars,
I had the impression that I could see Driver's face, and the trees and the sky's Blue were darker, but these are not there at all.
I guess it was the light, but sometimes it was difficult to distinguish between wet and dry road surface conditions.
Also, the features say that it reduces glare on the road surface, but to us, it seems to make it glare more.
Most of all, what bothers me the most is that the color appears to change at a dizzying rate/severe to adhere to compared to OEM.
This is disappointing because I had excessive expectations for polarization.
View detail
Fits: Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
I still prefer OEM.
No araiOEM in stock to try. [Color] I bought Clear
Is the installation stiffer than OEM? It is difficult to align and the gap with the Shield is not easily eliminated....
The feeling of use was cold recently, but araiOEM began to fog up even at temperatures that do not fog up, and it became impossible to run without raising the Shield, so I removed it immediately.
The OEM is a little more expensive, but I was able to reconfirm that OEM is still the best.
View detail
Interference with M30 Clear shield
I used it on my M30 Clear shield and it interfered when raising the Shield up.
I thought I had pasted it too far up, so I tried pasting it at the Limit where it interferes with the bottom, but it interferes with the top again, and it opens to open, but gets stuck.
I thought it was Large sturdy because it managed to open, but the adhesive on the stuck part stuck to the Shield and Helmet and left marks even after wiping.
It is too much of a quandary, so I cut off the part that had adhesive on it due to interference and used it once, although the anti-fogging performance will be reduced.
Clear shield does not remove stains and I am thinking of replacing it.
It really sucks. I want my money back for Gold and Clear shield.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
Non-dimmable
It is inferior to even OEMPhotoBlackMick, which is two years old and has a weaker dimming. In the first place, the Shield cuts the UV light, so there is no way the Pin lock inside would react to it. I should have realized this before I bought it.
[Color] Smoke and Color:I would like to try Yellow but only dimming is not recommendation.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
dimmer
It did not change at all, probably due to the UV Cut in OEMShield.
Melo when exposed to sunlight during breaks. [Color] It was about Smoke, but once Shield was lowered, it was almost [Color] Return to Clear.
I don't think you should expect too much.
View detail
SHOEI X-14 with dimmer Pin Lock Seat
Mistuba Sankowa Pin Lock Seat dimmer.
Installation itself is easy, although it requires a lot of effort.
The view through the Pin Lock Seat appears a bit distorted compared to OEM, which is uncomfortable until you get used to it.
The OEMShield from SHOEI does not allow UV light to pass through, so it does not dim at all.
When I checked the external Shield, I found that the Base is all OEMShield with Mirror processing, so the dimming Pin Lock Seat for CWR-F is completely useless.
View detail
Dimmable? Almost. [Color] It won't be Smoke!
I purchased a dimmer Pin lock, but it only changes to a very light color even under the hot pecan sun.
Amazon's Universal dimming Pin lock is 3 times better.
I was delighted with the exclusive Pin lock, but I am disappointed.
I will see if I can return it now.
Everyone be warned, it is about half the density of Mellow Smoke.
View detail
Fits: Others J-FORCE IV, Others J-CruiseII, Others J-Cruise
I shouldn't have expected too much.
I was attracted to the dimming function of CJ-2 for Shield by J-Force?
I was somewhat prepared for the delivery time as they were out of stock, but ・・・・・
The actual delivery time took two months and ten days due to every delivery postponement.
I had high expectations based on the product description, but I feel like I've been completely shattered.
First of all, the thickness of the product itself is too thin.
Compared to the OEM Product is the impression of a much thinner Pe LePera.
When I adjust the pin lock, the pin lock is wrinkled.
Still, the tension was put on and made to adhere closely...but it is an uneasy area.
And the dimming function, which I was expecting the most, is disappointing to say the least.
I exposed it to sunlight for 10 minutes on a sunny day, but it was only slightly purplish.
It is thinner than OEM Light smoke.
I am sure I was expecting too much, and I am disappointed with the touted message.
Moreover, the field of view is distorted, probably due to the thinness of the tip. I guess it does not bother me while driving.
It is intended for nighttime use and for wintertime use when days are short.
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
About the same brightness as Mellow Smoke.
Even under the hot sun, it only turns to Mellow Smoke. I should have bought PhotoBlackMickShield even though it is 4 times the price. View detail
With Manufacturer OEM
It attaches to the company's ALIEN II HELMETS, it interferes with Helmet Body and the shield can not open and close.
I attached it to the shield of OGK Helmet that I had.
View detail