Reviews
JapanManufacturer reaffirms its excellence
Bagnoia MODEL has a 22-year Replica. (In Japan) I bought it right after it was released, as it was a fulfillment of a long-cherished wish that I had had for over two years, as it had never been released. The shape is completely different from JapanManufacturer's, and the parenthesis is very nice. However, the functionality is not as good as the JapanManufacturer.
Size Sensation
Larger than Arai and SHOEI.
The Cheek Pad is quite tight, but other than that, the entire head is not held except for the cheeks, which are large. The entire head is not held like in Japan, and the shallow fit makes the wearer feel uneasy about taking off the head at high speeds.
I was a medium size.
The wearing feel is completely different from Arai and SHOEI, and is similar to AGV, including the Size feel. (No experience wearing Manufacturers other than Left Ki).
The Arai L size is my usual favorite, and although it is slightly larger than the Just size, it does not gap at high speeds. It does not give me any headache and is an ideal fit.
Large size of the cap
The cap size differs between M and L, so it is quite Large compared to Arai's L. (Arai caps are the same for M and L)
[Weight
It is light for its large size, perhaps due to the use of carbon in some parts, but not enough to impress.
Finishing
Do not expect the quality of Japan.
[Shield]
The Shield itself has no distortion, and its resistance to fogging is much better than Arai. The Shield itself is not distorted, and its resistance to fogging is much better than Arai's.
Wind Cutting Sound
Quite Large compared to Arai, uncomfortable. I was surprised at how different they are.
[Ventilation
Arai's RX-7X is far superior. In the first place, I couldn't feel the wind escape at the top of my head….
【Review】
It must be a pretty good product for the price." If you buy it thinking that you will regret it, you will surely regret it.
Design is good, so I think it's Collector's Items or something to show off to those around you.
Arai's RX-7X, which is less than half the price, is far superior in terms of functionality. The only thing I felt was better was the Shield connection.
Ironically, it was a kick-ack reminding me how great JapanManufacturer is. I am an AraiUser, so perhaps I feel that way more than I should.
View detail
Mellow SmokeSilver
Mellow Smoke is difficult to see due to the reflection on the inside, so the inside is darkened. [Color] Smoke might be better.
I thought I had been gently wiping water droplets off with Towel after normal maintenance and after using it in the rain a few times, but the plating is peeling off and it is hard to see these days.
Very Delicate Plating.
It did not last a year.
View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
Transparency is low.
I purchased ARAI's OEM Clear Shield in the hope that it would be a dimming shield, but in a nighttime room with almost zero UV light, the transparency is quite low, and although it is hard to convey in the photo, it seems to be slightly cloudy and cloud-like. I removed the protective seat. I didn't test the dimming in winter outdoors, but I don't think I should expect too much. I will make a comprehensive judgment after actually driving the car. View detail
The construction is very good, but when you actually use it, it is very difficult to use.
The make is very good and looks OEM 。 I put it on my MOTO GUZZI which does not have a helmet lock, but it is attached without any discomfort. 。 However, in actual use, the helmets touch the exhaust system because of the low position of the helmets. View detail
Shipping is good.
It is only now possible to attach an external DialWire lock to the Handlebar.
I think what you want to do is reasonable.
However, we still would like to see some improvements due to the use of existing locks.
1.Dial is Smaller
I don't want to touch it in the winter or anything.
2.Wire is too long.
Handlebar position could be half as short as it is now.
3.Lock position
Not the other way around, as they tend to pop up on the Grip side and interfere with each other.
I dare to put it on the other way around.
It would be nice if this area could be improved, but it is regrettable.
View detail
Images alone are not good enough.
It is a compromise because it is inexpensive, but I still couldn't tell the Fit feeling from the image alone.
Size:Even though it was Free, it was a little hard on Small.
I regretted buying it.
Well, it is Point payment, so I will compromise, but I will probably not use it and keep it or give it to someone else.
I realized that I should not buy just based on images.
View detail
That's DAYTONA!
I guess it means that DAYTONA is the distributor of MAGGI, but the same size on Amazon is DAYTONA and Webike is MAGGI, then I should buy from Webike. So, I'll buy it from Webike.
I thought it was DAYTONA. Absolutely not." I was not saying that I wanted to buy DAYTONA products, but I wanted to avoid them because I have been making a lot of mistakes buying DAYTONA products recently, emotionally.
View detail
Processing required
The guide on the body side of the mounting bracket was not attached as it was because the body attachment part of the mounting bracket and the guide on the body side were in contact with each other. The screw fastener of the mounting bracket also interfered with the box part of the air filter when the length of the wrench was too long, so I wondered whether I should cut the wrench or not, but I loosened the box side and shifted it to close. View detail
Fits: Others YJ-21 ZENITH, Others YJ-21 ZENITH Graphic
Not much change.
I bought the standard Size because it was too tight.
It is only to the extent that it seems to have become a little kitsamashi.
View detail
Fits: YAMAHA BOLT R, YAMAHA BOLT, HONDA REBEL1100, HONDA REBEL250, HONDA REBEL250 ABS, HONDA REBEL500, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC, HONDA Rebel300
If you're not careful, you can dent the Tank.
When the handlebar is pushed all the way to the Right in the open position, it contacts the tank.
I got a dent in my Tank with it.
I removed it because it would have been disastrous if I had inadvertently left it unlocked, although it would have been better if I had not left it unlocked.
View detail
Quality is good
The quality is good and the installation was easy even for an amateur. However, I am not sure if it is just my car model or the installation location, but the noise that resonates with the vibration of the engine from near the key cylinder while driving is quite loud. View detail
Required processing
The one-touch made it easy to attach and detach the Belt, but the part where the Belt passes through is too narrow and the Button attached to the Belt does not pass through. View detail
There is a problem with opening and closing
When I contacted the manufacturer, they told me that the lock would loosen due to wind pressure, etc., if the shields were left open.
Manufacturer was kind enough to replace it with a new one and told me to keep it closed when running.
We hope that the manufacturer will improve this area a little more.
It's a shame, because Mirror is very good, visibility, etc.
View detail
Fits: TRIUMPH BONNEVILLE T100, TRIUMPH StreetTwin, TRIUMPH SCRAMBLER
Grab Rail does not install well if present.
I purchased this for Bon Shrimp Le T100.
The screws for fixing the Grab Rail are not properly inserted because the angle 1 is not adjusted properly when I tried to install it according to the Instruction Manual, and the Large size is not correct when I tried to install it on the Grab Rail side.
In order to attach it to the Grab Rail, a layer of protective Tape would need to be attached, and I am looking into the availability of Tape.
Please let me know if there is a better way to install something.
View detail
For CUB
Very light. (Lighter than for construction)
It doesn't match the shape of my head, but the price is low, so I'll put up with it.
View detail
Fits: BMW R1200R, BMW R1200RS, BMW R1250R, BMW R1250RS, BMW S1000RR
Easy to install, but not great
BoltQuantity for installation:It is easy to fix with 2pcs, but the Plus screw that fixes the Helmet lock to the base often comes loose.
I had not known that it was necessary to apply screw lubricant, so I had installed it as it was and it went missing.
We have no choice but to use the Quantity:2pc. Purchased and installed Set #2.
View detail
One-touch helmet clip 503-0000220
Used for ARAI's Full face ASTRO-GX.
ARAI has a hook to fasten the excess chinstrap, but it is a tricky thing to put through the chinstrap and is quite difficult. Other K company has something similar, but due to the shape of the bracket, it would be impossible to use without modification.
I have been using it for more than 20 years and it is a good product with durability except for rust. It would be better if the length could be made more compact.
The reason for the low rating this time is that I got a slightly defective product.
One of the movable claws on the female side was sticking at an angle, making it difficult to engage with the male side. 。 HelmetBody was apparently safe as it was picked up in one van, but this is also Shield, which was just purchased and installed. (PROShadeSystem) is covered in scratches and visibility is poor. [Color] It was not usable as Smoke, just Sunshade.
I've blown Silicon spray and messed it up for a while and the movement got better for Large, but it will either recur eventually or get better with wear and tear.
Please do not distribute these items without inspection, as they are life-threatening parts. I am liable for compensation. Shield, I want you to compensate me for the high price.
View detail
Normal External Helmet lock of
The OEM Helmet lock was so uncomfortable to use (who uses that thing?!?!!) that I had no choice. LOL) I had no choice.
Buy… Well, it's normal use lol I wish they installed this much OEM… Actually.
If you fix the helmet properly while parking the bicycle, it will get scratched (actual experience), so you have to be very careful;
Very disappointed that only 1 pc of spare keys are included.
View detail
I don't care about the details…
I thought about cancelling the order, but it was too much trouble, so I tried to fix it by myself with double-sided tape. The first time, I used a small amount of double-sided tape to make the smallest possible correction, but it peeled off immediately and was useless. I used more double-sided tape the second time a few days later and carefully corrected it, and as of today, it has not peeled off. But to be honest, it is a defective, difficult, B-grade product. I wonder if it peeled off after inspection.If you give me a lot of ReviewPoint, I'll put up with it. View detail
Helmet hits Exhaust System …Helmet's protective coating peels off.
I purchased KITACO's Helmet lock, which had been out of stock for a long time, because it was back in stock.
Good for those who plan to install single seat cowl.
Seat Cowl must be removed for installation.
The difference between KIJIMA and KITACO is
KIJIMA's Helmet lock is placed next to the Tandem seat.
KITACO Helmet lock is installed next to the tandem bracket.
The ease of installation and feel of the helmet is definitely better with KIJIMA.
KITACO's seems to be attached in a manner of speaking.
KIJIMA is better for those who do not want to apply the helmet to the Exhaust System.
KITACO is cheaper.
View detail