Reviews
Use of Helmet lockAssist is recommended.
Remove the Tandem Footpeg Bracket once and install it between the body Frame and Bracket.
Other manufacturers seem to have the same mounting position, but the one made by KIJIMA fits inside the bracket, giving the impression of being Refreshing.
On the other hand, attaching and detaching the helmet is somewhat troublesome, and if you are not used to it, you may tend to hit the vehicle body or rider's tepe, so we recommend the use of the Helmet lockAssist made by the company.
In addition, I am concerned that the position of the Center Stand legs just touches the interior material of the Helmet….
We recommend this product to those who can find merit in its good fit, etc., after comparing it with other products that are attached to the mirror section or handlebar.
View detail
It's still convenient.
I bought it because the OEM helmet lock is difficult to use because you have to remove the Seat every time you use it. It is still very convenient.
In the past, motorcycles usually came with this type of key from the beginning, but recently the number has been decreasing. I really hope that OEMs will install this type of key, as it will increase the number of keys.
View detail
I wonder if it's worth the price.
Size:It's Free, but it's a Large size. I usually use size XL, but there is plenty of room.
The build and interior are well-priced. Wind noise is also quite loud.
Ventilation doesn't work either, like a bonus.
I like Graphic and use it for a little ride!
View detail
Number of days for ordering
It is supposed to be ordered in 7 days minimum, but I ordered on July 17 and was told that it would be shipped from September 13 to the 4th of the following month.
It may take quite a few days for this item to be ordered.
View detail
Fits: Others RX-7X, Others ASTRAL-X, Others ASTRO-GX, Others RAPIDE-NEO, Others XD, Others VECTOR-X
Visibility is stabilized. But it may not be amazingly effective….
This is for products in the color Pink.
The Helmet is RX-7X and the Shield is Yamashiro's EXTRA SHIELD Mirror Red, and while I have no complaints about the Shield, as you can see in the attached photo, the Semi-smoke just makes it a little darker, so the vision is not always clear.
So I tried this product and it makes me see a little brighter; the moment I lower the Shield, my vision is slightly pink, but I am not aware of it immediately. Also, even when stacked with Semi-smoke, it does not seem to darken, and the effect is clearly visible, so I guess the darkness is Plus minus 0.
However, I would say that it is not as good as it could have been, if I may say that it has become dramatically more visible.
View detail
![YJ-22 ZENITH[Zenith]Helmet](https://img.webike-cdn.net/catalogue/images/86345/zenikuro_TS.jpg)
Large Wind Cutting sound Large Kiku Minus
■ Design
Logo in Matte Black and Color:The screen is gray with a large, long, oval-shaped silhouette, giving it a slim impression. The interior color is Brown, which gives a fashionable impression.
■ Function
It has basic features such as GlassesSlit, ShieldHolder, Ventilation, etc. It is equipped with a sun visor and is easy to raise and lower. The SpeakerPocket makes it easy to install the Income or Speaker kit by simply inserting the speaker into the pocket. The One Touch Buckle is different from OGK's, but the buckle is a small type, so it is a little difficult to find the lock when you put it on.
Performance
As the title says, Wind Cutting sound is very Large, perhaps due to the shape of the helmet, but it is a Large sound compared to the same Jet helmet YJ-20 of the same company or OGKCUBT's Jet helmet of about 20,000 yen of other companies.
Also, running noise can be heard reasonably well. In other words, the sound insulation is not as good as a helmet priced below 10,000 yen. The weight is average, but the inside shape is a little large, so there is plenty of room even if your head or face is large.
■ Optional item
Unlike the YJ-20 that just came out, it is not treated for fogging. Rain, of course, but temperature differences can cause extreme fogging. Therefore, a Pin Lock Seat is a must. In my case, I had to wait for several months to get the special Pin Lock Seat. In the meantime, I used the Universal Type, but the Universal Type is perfectly fine, and I don't feel much change after replacing it with the dedicated one.
General Comment
Depending on the driving attitude and the motorcycle, wind cutting noise is terrible at speeds over 60 km/h, so it is suitable for short-distance touring on downhill roads. The Merit is the smallest size, but it is also the least expensive, stylish, and the size is large, so it can be easily attached and detached. Those who use the Merit at high speeds and those who require good sound insulation should be very careful when purchasing it.
View detail
Fits: その他 A-FORCE RS JET, その他 G-FORCE-SS-JET
It will be stronger as a helmet, but… it will also be more durable.
When fitted, the helmet becomes stronger and more secure when touring at faster speeds.
However, when installed, the Visor part is wide and provides good visibility, but the chin guard is too low and the top of the nose guard comes under the nostrils, which is very bothersome while driving. As a result, I have to remove the nose guard when I wear it, and I think the Visor fogging up considerably in winter. I am not particularly large, nor do I have a passive mouth, so I am sure there are many people with this problem.
This is a recommendation for those who consider strength and safety to be the purpose. On the other hand, it is not a recommendation for those who consider the prevention of fogging and appearance of the Visor to be important.
View detail
one's size (as opposed to one's size in general)
Size 57cm, too large for my size medium.
The included sizing pad is not sufficient and is used with a hat.
The quality is adequate for the price. The only thing is that the V-section next to the chinstrap does not fit well.
I think this is a good product for sticker tuning and summer street driving.
View detail
![Shield [for RX-200R].](https://img.webike-cdn.net/catalogue/images/78742/RX-200RS_TS.jpg)
About Dark smoke
I use a Bell Helmet when I go Touring, but I use a LEAD Industries Helmet when I want to ride Motorcycle in a Showa era atmosphere. If you ride at night, you should definitely not use Dark smoke. It is quite dark. It is nice and not glaring in the mid-summer sun. I can also recommend it to people who don't want to show their faces. (Laughs) View detail
Less keys is good.
Instruction Manual says to attach it to Handlebar, but I rejected it because it is not a good parenthesis.
I made my own Bracket and attached it to the back of the License Plate.
If you have a helmet holder on your motorcycle, it would be a good idea to put it on instead.
good point
It is a simple security measure that reduces the number of locks and the Helmet can be hung.
Much better than hanging it on Mirror.
A bad point
Numbers are hard to adjust to Small
In the dark, it's impossible without Light.
View detail
![MODIFY X JET [Modify/X] Jet helmet](https://img.webike-cdn.net/catalogue/images/21330/modifyx-jet-mb_1_TS.jpg)
Shield is short
Overall, it is a nice Helmet, but the Shield is short and the Glasses sometimes stick out of the Shield. View detail
![BONANZA [Bonanza] Universal 3-point Helmet Visor](https://img.webike-cdn.net/catalogue/images/46062/D661A196-6A33-4686-8E57-A93F24864CAC_TS.jpg)
Visors with a choice of color variations are now rare.
Most of Visor's Universal Products are all black, so it is nice to have a choice of colors.
The Visor is a little bit loose when installed, and the Visor is a little bit loose in its fixation, so it is a little bit of a problem.
View detail
![X-ROAD COMBAT [X/Road Compact] Graphic Helmet](https://img.webike-cdn.net/catalogue/images/76723/xrc-std-blue_TS.jpg)
Stylish and Reasonable
The price is low for an off-road type helmet with a shield, and the quality is quite good.
The exterior design is uniquely unique and cool, and the overall quality is high, including the interior.
Fit is good once on, although the opening is a little narrow and tight when putting on and taking off.
On the other hand, the Shield is poorly made. The Chin guard part of the helmet is pointed, and the Shield itself is also pointed, and the Shield is also curved to match the shape of the tip of the Shield, The Shield cannot be used in the middle position, and can only be fully opened or fully closed.
In the city with a lot of Go & Stop, at low speeds, and on forest roads, I want to get ventilation, so I open it all the way, but if I try to use the Inner Visor to protect my eyes as well, this is very dense. [Color] Smoke, and I can only use it under the hot sun in the middle of summer. I have tried to use Inner Visor of Option "Rainbow mirror", but it is troublesome to switch between Shield and Inner Visor, and it is very confusing.
Goggles can be used, but there are very few types of Goggles that can be used, and at the moment, I use neither Inner Visor nor Goggles, and I always use Clear work Glasses in combination in case I need to open the Shield fully.
Ventilation is included, but I don't think it is very effective, and the helmet itself is a bit heavy.
For those who value Parenthesis quality and don't care much about features...?
View detail
Fits: Others X-14, Others Z-7 RYD, Others X-TWELVE, Others XR-1100, Others Z-6, Others QWEST, Others NEOTECII, Others GT-AirII, Others GT-Air, Others NEOTEC
Dimmable Pin Lock Seat
The color change is much lighter than I expected.
Is there a hit ha Gap? I am sorry to say that there is a Stain-like cloudiness all over and I can't wipe it off.
I understand that it is an Other Brand Product, but it would be nice to change to a darker color.
It is better than NORMALClear with dimming.
View detail
![MadJumperII SOLID [MadJacket2 Solid] Helmet](https://img.webike-cdn.net/catalogue/images/72247/MJ0017_01_TS.jpg)
Comparison with SHOEI VFX-WR
Purchased for Income use, city driving, and touring
FRP is light enough even if not as light as Carbon
MudguardVisor's wider slit makes it less susceptible to wind.
It is hard to put on and take off with gloves on because the chinstrap is not firm and the Snap button, which fastens at the end after the D Ring is put through, is not very uneven. (I wonder if I'll ever get used to it.)
The VFX-WR has a shallower cap, so the hold and sense of security are superior to the VFX-WR. (but don't worry about gapping if it's the right Size)
I think this is a good value for the price and quality, so it could be a good candidate for first-time Off-Road Helmet buyers or those who intend to install Income.
View detail
First Bubble shield
Purchased for color, the color alone is great, easy to see both day and night.
However, the inner reflection is quite noticeable and the pores on the nose are enlarged due to the shape.
I would like to see an anti-reflective method on the inside.
It is quite hot in summer without much wind inside.
View detail
Visibility is No.1
The vision is like the naked eye with no inner reflections and with color. It is at the same level as the naked eye with color.
However, the driving wind is also at the same level, and it is very windy to the eyes.
View detail
What do you think of the price difference with OGK….
Some may be confused by the fact that OGK, the Rival in this price range, has repeatedly raised its prices, and the price gap between this product and the Rival has narrowed.
【It was good point】
And, best of all, it's lightweight.
Fluffy interior
Complaints.
Concerned about the durability of the Bench Parts in the back of the head.
The length of the Inner Visor is said to have been improved, but it still feels shorter than the EXCEED.
The feel of the interior is likely to be a matter of taste, and I feel that I would prefer to be covered a little more tightly.
I guess the product choice will depend on how much priority is given to mass and Graphic model design.
View detail
I don't know why it wasn't there in the first place.
[How is it used?
Wear it every day because it does not come off.
Was the one you received as per Image?
Street Image
Was the installation difficult?
simple task
How was your experience with it?
Unknown as Touring has not been there yet.
[Included Parts:were they on?
Everything was there.
[Was there anything that disappointed you?
The key is cheap, I wanted it to be Dial.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
The product itself is good, but installation is quite time-consuming and the Instruction Manual is not very comprehensive.
The installation was far more troublesome than expected.
The fact that it is troublesome to install means that Helmet may never be stolen because it is difficult to remove.
I installed it myself, but if you are not a self-starter, it is better to install it at a motorcycle shop.
View detail