Reviews
Sure, it's easy.
I thought I could do without it, but when I used it, it was much easier than I had imagined. View detail
Fits: Others , DUCATI SPORT1000, DUCATI PAUL SMART1000LE, YAMAHA V-MAX 1680
It is indeed a Jtrip.
I used it on my car MOTO GUZZIV11. I bought the Wide one because I thought I could not use it with the NORMAL one. I was nervous at first because it was my first time to use it, but once I put the hang on, it was easy. I used to use Astro's one, but it costs about 3 times as much, so I am satisfied with the high quality at a reasonable price. View detail
It was a great help.
I had never thought of such a product until now.
Good, good~!
View detail
It goes up very lightly.
We are z900RS.
I had wanted a maintenance stand for a long time, but I also thought that a center stand would be fine, but I wanted to install a YOSHIMURAHand Bent, so I gave up on the center stand and decided on the maintenance stand.
Impressively, I was surprised at how lightly it went up.
Probably light enough to be raised by a Small school age girl. I was surprised.
As I have written elsewhere for those who use YOSHIMURA, please use a bracket with the opposite shape of a normal bracket for the old-fashioned YOSHIMURAHand Bent, since a normal bracket will scratch it.
What is the opposite of normal, on the Maintenance Stand side, [Ts] You can install a Bracket like the one shown below, but you can also use the Material:Plastic round shape circular fixtures.
[Ts] Brackets like the one shown below are brackets that can be attached to the body of the vehicle.
I have always wondered if there might be a reason why only YOSHIMURAHand Bent's Exhaust System is parallel to the ground.
It's still different, isn't it? It's originally for re−sing!
View detail
Should be replaced promptly when old.
The company's Maintenance Stand, which has been used for many years.
The rubber at the tip of the V-receptacle also deteriorates as it is exposed to the wind and rain over the years.
Repeated use of the product in a battered or detached state can lead to damage to the vehicle, so it is best not to be stingy and replace the product when it is cracked or comes off easily.
When you replace the product with a new one, you will still notice the difference in quality from the deteriorated product, and this alone will somehow restore a sense of security.
It's just a tip rubber, but it's a tip rubber.
It is a good idea to replace it promptly without being stingy in order to protect your car.
View detail
Required by Maintenance/Circuit.
If you do your own maintenance, you will need to do it,
I think the longer one can hang STAND with lighter force.
The construction is solid and secure.
I think it will last a long time. It's a little expensive, but...
View detail
This makes it easier
The company's LongRear stand and Quantity:I used a set and was able to lift up with ease. I guess I could substitute a stronger Rubber Band or string, but for 500 yen, I would be willing to buy it. View detail
Helpful Rubber and Quantity:Set
Helpful Rubber and Quantity:I used it in a Set and was able to Lift up in one shot even though it was my first time.
I feel that it is expensive and well made.
I was surprised that the shipping box was quite Large.
View detail
Used in maintenance and storage.
J-TRIP J-Trip JTrip:JT-1052RD
Narrow Roller Stand 8-18
I use it in conjunction with
View detail
It is used in the maintenance of MONKEY125.
Easy-to-use Size feel.
Besides maintenance, it is cool just to hang STAND on the wall when storing, etc.
It is used in conjunction with a Stand Hook that attaches to the base of the Rear Shock.
View detail
J-TRIP J-Trip JTrip Short low Ra Rear Tan
We used to use a certain A0-tro product, but its strength was not good enough, so we were considering J-TRIP, although it is more expensive.
After purchasing the product, I am very satisfied with the stability and the ease of raising and lowering the product on a Large Motorcycle.
View detail
I can't give it to you without it. It is a must buy!
I bought this Option to use the Jay Trip , Low Roller stand (item #:JT-1052QR).
"V-receiver, 2." They say.
To begin with, I did not purchase STAND out of necessity, but I purchased YOSHIMURA's Rear Stand Bracket Set for VSTROM250SX. (M8) I had been putting on the Option (Option 1) for the time being, so I bought this Option because I had seen it being used with the Jig Sur which is almost the same as the Option (Option 2) and I thought it would be good.
As expected, it worked properly.
However, if you don't use it well, the red rubber part on the end may come off, so it seems that you need to get used to it.
I am a novice when it comes to STAND for RoadMachine, so I will do my best to familiarize myself!
View detail
JTrip L-Shaped Receptor
Rubber that came with the original (Red) I bought a replacement because the "Black" part was falling apart and I had never seen a Black Rubber before I learned about WeBig. View detail
This is the Sokojikara of JAPAN!
I bought this for my VSTROM250SX.
Since this Motorcycle is almost a Jig Sur, STAND for Road is suitable for it.
I have a thing for OFF, but I could not use it at all for this Motorcycle.
And it took me a bit of time to use it because I have only used the kind that lifts from the belly for OFF, but, well, I think I can handle it.
And one more thing, I need an Option nail for this STAND, but I'm yuuuugggee! "V-receiver, 2." I was not sure what it was for. I didn't really know what it was for, but I thought, "This is it for now, right? It seems to be usable for now. However, it does not seem to be the ideal shape for motorcycles.
It was relatively easy to hang, but I had more fear when it came time to take it down.
At least you have to get used to it, but you will probably only use it for Chain adjustment, so the Chance may be small! (^。^) y-. O-
View detail
Convenient
I bought it for Chain refueling and washing for Vehicle. View detail
I am satisfied
The packaging material has a Cigarette smell as others have mentioned? If JAPAN is a feature of this product, I would like to use it.
The body is solid and even a beginner can handle the assembly. I wrapped it with rubber mat to protect the installation area. I haven't put my motorcycle on it yet, but it fits EXACTLY in a tentative fit. The height is the lowest position in the 3 levels of holes, and the width is the widest position, which is almost the width of the largeest hole. There is still room to spare.
View detail
L-shape
I have not used it yet, but the texture of Rubber is not bad. View detail
Jay TripMaintenance Stand
I was worried about the cheap Chinese ones from Amazon, but I decided to buy the Jay Trip one for its long and safe use. I have not used it yet, but it is well made and the purchase was a good decision. View detail
Reliable Brand
There are less expensive products for the same purpose, but if you want to use them for a long time, the Manufacturer here is Recommendation.
A Hook to hang the removed Brake Caliper is also included, which is very convenient.
View detail
Used for Tire warmer
I use it on my Ninja 250SL that I ride for Circuit Racing.
This is a product with excellent cost performance
View detail