Reviews
For Maintenance
Light weight, good appearance
It's a good product
I was not sure about JTrip, but I am glad I chose this product.
View detail
I bought it for Race
[How is it used?
I used it to put on Tire warmer at Circuit.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
It is very easy to install and remove, so it is very useful in Circuit!
[Points to note]
Can be installed on any commercial vehicle body.
View detail
During car wash and wheel maintenance
It is designed for mini bikes, but the stem hole diameter is suitable, so I used it on the MT-10. Naturally, the Rear is supported by the maintenance stand. It takes a lot of force to raise it, but it works. However, it is not suitable for maintenance that requires a lot of force because it tends to wobble. In that case, it is definitely more stable to use a normal front stand.
Also, if the foot hangs at an angle halfway, the STAND of the Rear may gap.
View detail
Small Stand Hook.
I installed this Stand Hook on my SC59 CBR1000RR, and I have noticed that if the Stand Hook is long enough, the whole Swing Arm weld often flies off when the bike falls over. This Stand Hook is very small and I think it will minimize the damage when it falls over. I slip down once after installing the Stand Hook and the Stand Hook was not damaged. I also use the Rear Stand made by the same company, but the Stand Hook is not so small that it is difficult to lift up, and I think it is very easy to use. View detail
Very lightweight
This is a very lightweight STAND. Originally, we were using a STAND made by another company, but it was heavy and a little inconvenient when carrying it or loading it on the transporter. The Battle factory STAND we purchased this time is very lightweight and can be carried easily with one hand. The feel of the STAND is not a particular problem, but it is a little less rigid than the steel ones made by other companies, but I thought that was a trade-off with the lightness.:I like it because it is Stainless Steel and looks very Parenthesis. The bosses are set up differently for each car model, so you should be aware of that when purchasing. I highly recommend this product and I am very satisfied with it. View detail
Fits: HONDA NSR Mini, HONDA NSR50, HONDA NSR50, HONDA NSF100, HONDA NSF100
Good quality
A little expensive but good quality. View detail
Easy, easy to lift
It is a little heavy, but can be lifted easily.
It can be folded so it takes up little space in the Transporter.
The stability is there, too.
View detail
Commercial groms can be used without problems!
I bought this for daily maintenance and to wrap the tire warmer at the circuit. At first I thought I would have to take the headlight off to use it, but I had no problem at all and was able to lift it easily. Moreover, it can be folded up when not in use, so it can be stored without taking up too much space.
It was an excellent product.
View detail
Easy to lift!
[How is it used?
Circuit
Was the one you received as per Image?
Street Image
How was your experience with it?
It is easy to raise by the principle of lever, and I think even women can raise it. These products should be well-made, not cheap.
[Points to note]
How did it compare to other products?
Good cost performance. It is safe because it is a car model-specific product.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Rear stand should be applied before use. Naturally…
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
It can be used for the current model without any problem.
I've been using it on my current model since 2019 and it works perfectly fine.
I think the ease of use is the same for all models.
By the way, I used it for many years with Ape 50 and CB400SF.
View detail
Fits: HONDA CBR600RR, KAWASAKI ZX-6R, SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA MT-09, YAMAHA YZF-R1, YAMAHA YZF-R6, HONDA CBR1000RR
Good product
The welds are very good and the weight is relatively light and easy to use
I've used other companies' products a few times before, but so far I like this one the best
Material:Stainless steel and looks durable, so it will work for the time being
The wheels are poorly made with plastic-like material
If you're concerned about it, I'd be happy to replace it
View detail
Simple STAND, but finishing, ease of use, arrangement is wonderful.
Used for Warmer winding and Wheel exchange in Circuit.
Transporter got Small, I was suffering from loading, so purchase this product.
Simple STAND, but finishing, ease of use, arrangement is wonderful. Finish beautifully light. Transportter loading is preeminent because its dimensions are Compact.
The disadvantage is stability. Is stability feeling inferior to Large width in Roller type
Let's do until Wheel replacement.
Well, this Type is useless.
Also, the insertion point, the accuracy of the boss is too high Requires kitchen wear.
Those who are considering purchasing please check the system of the insertion mouth well. I can not use it because of a systematic difference
View detail
Fits: MORIWAKI MH80, HONDA NS-1, MORIWAKI MH80, HONDA NS-1
Simple and easy to use.
I use it for HONDA's NS-1. With Simple it is hard to break without fine parts, so Stainless Steel makes it easy to drop dirt that it got hard to rust. I thought that it was a bit expensive. View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX1300R Hayabusa, KAWASAKI ZRX1100
It uses all the time.
It uses all the time. View detail
Fits: HONDA CBR600F, HONDA CB400SF, HONDA CBR400RR, HONDA CBR600F, HONDA CBR900RRFire blade, HONDA NSR250R, HONDA NSR250R, HONDA RS250, HONDA VTR1000FVTR1000F FIRESTORM, HONDA VTR250, SUZUKI BANDIT250, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
[ -- the Webike Monitor ] -- he is Mr. Battle factory who is performing Race activity truly -- when it took out from a box at the beginning of , it was surprised at lightness. and the power which carries out a Jack-up are also light power, a
[ -- the Webike Monitor ]
-- he is Mr. Battle factory who is performing Race activity truly -- when it took out from a box at the beginning of
, it was surprised at lightness.
and the power which carries out a Jack-up are also light power, and ends.
Also when putting in the
Axle Shaft, a STAND cannot interfere and it can put in.
Welding is very polite at
last moment, and structure is also quite good for it!
Colet was goods which are purchased and can be regarded as good.
View detail
There is only an exclusive design and it is easy-to-use. Although No. 1 is that it was cheap at SUS [ else ] (smile), it is not flexible, but it is enough. Moreover, I think that lift up can be more simply carried out if it lets a shaft pass since
There is only an exclusive design and it is easy-to-use.
Although No. 1 is that it was cheap at SUS [ else ] (smile), it is not flexible, but it is enough.
Moreover, I think that lift up can be more simply carried out if it lets a shaft pass since the hole is open on V hook.
It is recommended.
View detail