Reviews
To renew the terminal where GreenBlue came out.
I bought a battered 900SS (900SL) and am Restore.
The body of the car is in shambles, but the Harness is fine! There is no such thing as a "wiring".
As in older Italian cars, there is a Bullet Type Terminal connection on the large quantity, which is suspect due to corrosion and other problems, so we decided to redo it.
These are best new!
We were not sure how many we would need for the entire body of the car, so we bought 30 more for now, including the stock we originally had on hand, with the expectation that we would not run out.
Male and Female are Quantities:It is not a Set, so it would be nice if the application is to use only One Side for Large quantities.
(I actually had to use only Male this time when I converted RearBlinker to LED)
It is a common Bullet Type Terminal and has no excess or deficiency in performance.
The surface finish, ease of crimping, feel when inserted, ease of removal, and ease of pulling out are all standard.
Since there is no such thing as too many Bullet Type Terminals, buying them in bulk is a recommendation because it saves you from having to go out and buy terminals when you need them.
View detail
To renew the terminal where GreenBlue came out.
I bought a battered 900SS (900SL) and am Restore.
The body of the car is in shambles, but the Harness is fine! There is no such thing as a "wiring".
As in older Italian cars, there is a Bullet Type Terminal connection on the large quantity, which is suspect due to corrosion and other problems, so we decided to redo it.
These are best new!
We were not sure how many we would need for the entire body of the car, so we bought 30 more for now, including the stock we originally had on hand, with the expectation that we would not run out.
Male and Female are Quantities:It is not a Set, so it would be nice if the application is to use only One Side for Large quantities.
(I actually had to use only Male this time when I converted RearBlinker to LED)
It is a common Bullet Type Terminal and has no excess or deficiency in performance.
The surface finish, ease of crimping, feel when inserted, ease of removal, and ease of pulling out are all standard.
Since there is no such thing as too many Bullet Type Terminals, buying them in bulk is a recommendation because it saves you from having to go out and buy terminals when you need them.
View detail
amon Crimp Terminal Comprehensive little kit
Decent quantity of crimps Good selection of terminals. Bought this to ensure correct terminal for repairs. . Very useful and ready for next repair.Great value kit with a good selection. Ideal for everyone's tool box and in a handy case too.came with the little box and very easy to find and storage.Nice concise good quality crimp set that is essential in anyone tool kit.Needed a choice of crimps and terminals for urgent wiring job on motorcycle .They are easy to crimp with the right tool! got 5sets box for very cheap price.I really like this set and worth the money. buy with the confident .you'll get the quality crimp terminal set for lowest price..Need to remind WEBIKE packaging and fast reliable service .WEBIKE PACKAGING IS TOP NOTCH and very well secure.The only place where you can confidently buy the spare parts you need at the lowest prices . If you choose EMS , Shipping chargers are very Fair enough very well organized online shop . webike shop is very AUTHENTIC . 5STAR SHOP. Thank you webike for the support.I'm looking forward to buy more stuff .I highly recommended View detail
unaffected and sober
The price is high, but I think it is reasonable because it is well made.
It does not deflect when carrying a motorcycle or a person, so you can load your motorcycle with confidence.
View detail
Excellent loadability, may be essential for transporting on road motorcycles.
[How is it used?
It is installed in the second row of the E25Caravan.
Since I am usually an Off-road motorcycleMain, I had difficulty transporter an On road vehicle.
It was difficult to pull from below, so we introduced this one.
I could have drilled holes in the Floor, but it was too much of a hassle, so I bought this one after seeing someone I know using it.
Was the one you received as per Image?
This product, which did not seem to be available, is a great way to scratch an itch.
I was worried about getting to Caravan, but it was no problem.
Was the installation difficult?
ScrewQuantity:It's 2pcs, so it's really easy.
How was your experience with it?
Good as expected.
It is small in size and does not get in the way at all.
I don't usually use the Hook much, but I don't mind when I don't.
As a byproduct, a board is strapped to the back of the second seat, which also plays a role in securing it.
[Included Parts:were they on?
Only the one in the product image.
[Was there anything that disappointed you?
Not at all!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I know it's not very demanding, but Quantity:I would have been happy if you could have made it cheaper, even if it was 1 set of 2pcs. or something.
View detail
I bought it for repair. Securely shipped.
I bought it to use it for motorcycle repair and the same product as the picture was delivered Because it was an outside product, I bought it cheaper than oem products View detail
Cheap and solid
Used in Step WGN Maintenance of Transporter.
I thought it was slightly difficult to put in and out the Bracket, which determines the height, but if you apply Rub or Grease, there is no problem.
It is cheap and has a sufficient load capacity, so I think Sunday mechanic is good enough.
I should have bought the Rubber adapter (sold separately).
View detail
For ZX-14R Low beam H11
A little expensive, but installed before vehicle inspection
Heat sink is large, so I think it will be a good choice for your car model.
And since the Unit is a separate unit, you can't use it in a car model that has a lid on it.
Double-sided tape the Unit to the Frame near the Stem as shown in the photo.
When I put it on and put the Connector on top of it, it didn't interfere anywhere.
The heat sink will be hot, so if you go around it without touching the wiring
It just happened to look like this
It's bright and no complaints but it's expensive. Low beam for car inspections, so this year is not relevant.
View detail
Fits: Others 200 series High ace S-GL
Recommended for all those who want to make the most of the luggage compartment in High ace.
The 200 Series High Ace does not have a luggage rack in the luggage compartment, so items such as racing suits and changes of clothes that need to be hung (or hung out to dry) must be hung from the Assist Grip on the 2nd row Seat.
So, this product allows you to hang things in the luggage compartment.
By making it easier to place racing suits and helmets in the luggage compartment, along with motorcycles and tools, the entire second row seat can be used for other purposes, which is very convenient. It is also good that there will be more places to hang Hooks for securing luggage in the luggage compartment.
The main drawback of this product is Drill teeth directly against Body." I think this is the part that is the most important. The task itself is not difficult, but this The Spiritual Hurdle." is unusually high, and the average person would hesitate to use it.
The distributor also has an installation video on its website, which shows a large amount of Washer on the teeth to seal the Drill's excessive penetrating force, but the average household does not have such a large amount of Washer, and not many households have 10mm Drill teeth in the first place! I don't think many households have 10mm Drill teeth to begin with.
In the course of this work, we considered purchasing a large quantity of washers to cover the drill teeth, but they are surprisingly inexpensive, and it is unlikely that a large quantity of washers will ever see the light of day again. Therefore, we prepared a 20mm PVC Pipe (about 100 yen per meter) and used Washer only at both ends to adjust the length for Body processing.
The work itself is not difficult and can be installed in less than 30 minutes.
Lastly, although the product may have been developed with a lot of ingenuity, I still cannot shake the feeling that it is relatively expensive.
View detail
Awesome Product!
I often travel 3+ hours to a riding spot and usually have the bike strapped down, with the suspension compressed the whole ride there. It DOES keep you from reefing down on the fork springs so tightly and makes it more stable when hauling. Not to mention all the pressure blowing out your fork seals.This keeps that from happening. A must buy to keep your shocks healthy all season. Plastic there's no danger of scratching fork legs.round portion goes on the tire and square portion on the triple clamp. Plus, the material is A+. Great investment for the money.Good piece of hardware. Only complaint is it could be about 2cm longer. Lastly, it stays in place better than the chinese, which I have actually lost more than once. View detail
For transporter use with light trucks
It can be a Ladder and it can be an Extender.
It is strong and looks good, so I am generally satisfied.
I use it with mxSTAND to load and unload Motorcycle.
View detail
Motorcycle or car is acceptable
Ideal for cases where soldering is impossible or where you want to make a removable harness! View detail
That would be handy
It would be useful for electrical DIY.
This is one product you will want to keep in your tool box with Electric Works Pliers!
View detail
For back-up and earth installation
Used for Wiring installation of electric heat.
Emon for peace of mind and the number is just right and cosy.
View detail
Good job
Fitment is exact & the material used is of good quality. Prevent outside from viewing in. Expensive but totally worth it for the quality & fitment. View detail
5Quantity:Set is also included
You don't have to buy this kind of thing, but you can branch out by making it yourself using two Wiring sticks, but, well, it is easier to have it than not.
This eliminates the worry of wire breakage rather than putting two Wiring together.
5Quantity:I think this price is reasonable for what is in the Set.
View detail
It is originally for Vehicle, but can also be used for Motorcycle.
I originally bought it for four-wheel maintenance, but I also use it for Motorcycle Lift up.
Although it is compact, it is designed to withstand 1 ton per pc, so it is stable and Brown.
When I raise the front or rear of my personal Level Motorcycle to remove the Three-Pronged Fork or Swing Arm Link, I use a Side Stand + Pantograph jack instead of a Racing Stand or Front-up Stand (a common technique in the Off-vehicle world, although some people may not be aware of it). (Some people may not know this, but it is a common technique in the off-car world.) However, when lifting a heavy motorcycle on rough terrain, the Pantograph jack alone is unstable and may come off.
In particular, frames without underframes are difficult to capture the center of gravity, and if the crankcase alone is used to support the frame, there is a possibility that the case will crack.
The Pantograph jack is then gently raised by placing it against a crankcase (while curing), and supported by an engine mount using our Jack stand while placing a block or the like underneath. Just like a four-wheeled vehicle. "Uma." The use of the product as a
As mentioned at the beginning, this product is quite Compact and does not take up FootSpace.
It is not the typical folding type, so it will not fold, fall over, or break even if it is set up a little roughly.
It also has a good amount of raising width, and is a very easy-to-use product, even when viewed purely as a Jack stand.
When stored, it can be made into a small size by alternating the two sides.
It is good to have it because it is useful for something in Motorcycle maintenance.
View detail
Cheap and very high quality
Used to move the position of GeneratorCoupler (Wiring extension) in SR(1JR).
I wonder why 1JR has a coupler in that delicate position.
Aside from Type 250 terminals for Coupler, TAB, receptacle8Quantity:This price is quite inexpensive, as it includes a Set.
It is cheaper than KITACO and cheaper than buying in bulk, such as products sold for vehicles. Emon is the cheapest after a lot of research.
There are Chinese CouplerTerminal Sets available elsewhere, but they are not that cheap, and the quality is poor and rickety, so I don't want to use them for the 250 models that are supposed to handle large currents.
Emon is said to manufacture their products in-house at their own FOR JAPAN MODEL factory, so the quality is consistently high and inexpensive. I dislike Emon's Bullet Terminals because they are too high quality and the mating is too hard, but there is no problem at all in this 250 type.
The 250 type for Coupler has a projection on the side of the Male terminal, and the Female terminal has a projection on its back.
This locks the housing, but it is also possible to use a terminal Single Body without housing.
Basically, it is assumed that you have a separate PVC protective Cover, but you can cut the protrusion of the Male terminal so that it does not poke through the protective Cover.
View detail
Easy installation
I purchased the Mukawa MF12V1.3Ah to install in my MONKEY50 and was able to install it successfully.
The packaged product fits easily into the electrical parts box, making it easy to find during later work.
View detail
low price
With other manufacturers, you can only buy one or two at this price, but this is a low price anyway.
When I have purchased from other manufacturers in the past, I was able to buy them one at a time in Rose, but they were packed in a large Vinyl bag.
View detail